IRGP4063DPBF IGBT Equivalent & Substitute Parts

Part Overview

The IRGP4063DPBF is an Infineon Technologies IGBT Trench 600V 96A TO-247AC component rated for 330W maximum power dissipation. This part is classified as Obsolete, making identification of functionally equivalent substitute components necessary for ongoing system support and new design alternatives. The component features a through-hole TO-247-3 package configuration suitable for high-current switching applications in industrial power conversion circuits.

Key Parameters

Parameter	Value	Unit
Voltage - Collector Emitter Breakdown (Max)	600	V
Current - Collector (Ic) (Max)	96	A
Current - Collector Pulsed (Icm)	144	A
Vce(on) (Max) @ Vge, Ic	2.14V @ 15V, 48A	V
Power - Max	330	W
Gate Charge	95	nC
Td (on/off) @ 25°C	60ns/145ns	ns
Reverse Recovery Time (trr)	115	ns
Operating Temperature Range	-55 to 175	°C (TJ)
Package / Case	TO-247-3	-
Mounting Type	Through Hole	-
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitute parts for the IRGP4063DPBF are selected based on the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

Voltage rating: 600V or higher collector-emitter breakdown voltage
Current rating: Minimum 80A continuous collector current (IRGP4063DPBF rated at 96A)
Package: TO-247-3 through-hole configuration
Input type: Standard gate drive
Mounting: Through hole

Secondary Compatibility Factors:

Operating temperature range: -55°C to 175°C or compatible subset
RoHS3 compliance and REACH unaffected status
IGBT type: Trench, Trench Field Stop, or PT variants acceptable within voltage/current envelope

The following substitute parts meet these criteria and are grouped by manufacturer and product status.

Parameter Comparison

Parameter	IRGP4063DPBF	IKW50N60DTPXKSA1	STGW60H65DFB	APT54GA60BD30	IXGH36N60B3	IXXH50N60B3D1	NGTB45N60S2WG
Manufacturer	Infineon	Infineon	STMicroelectronics	Microchip	IXYS	IXYS	onsemi
Voltage (Max) [V]	600	600	650	600	600	600	600
Current Ic (Max) [A]	96	80	80	96	92	120	45
Current Icm (Pulsed) [A]	144	150	240	161	200	200	-
Vce(on) (Max) [V]	2.14	1.8	2.0	2.5	1.8	1.8	-
Power - Max [W]	330	319.2	375	416	250	600	-
Gate Charge [nC]	95	249	306	28	80	70	-
Td (on) [ns]	60	20	51	17	19	27	-
Td (off) [ns]	145	215	160	112	125	100	-
Reverse Recovery Time (trr) [ns]	115	115	60	-	-	25	-
Operating Temperature [°C]	-55 to 175	-40 to 175	-55 to 175	-55 to 150	-55 to 150	-	-
Package	TO-247-3	TO-247-3	TO-247-3	TO-247-3	TO-247-3	TO-247-3	TO-247-3
Product Status	Obsolete	Not For New Designs	Active	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Active Product Status Substitutes (Recommended for New Designs):

The STGW60H65DFB (STMicroelectronics), APT54GA60BD30 (Microchip), IXGH36N60B3 (IXYS), and IXXH50N60B3D1 (IXYS) all carry Active product status and are suitable for new design implementations. These parts maintain 600V or higher voltage ratings and support the required current envelope.

STGW60H65DFB provides the highest power rating (375W) and lowest reverse recovery time (60ns), with voltage rating increased to 650V. Operating temperature range matches the original part (-55°C to 175°C).

APT54GA60BD30 matches the original 96A current rating and 600V voltage specification exactly, with superior gate charge characteristics (28nC versus 95nC) enabling faster switching. Power rating increases to 416W. Operating temperature upper limit is 150°C.

IXGH36N60B3 and IXXH50N60B3D1 are IXYS GenX3™ and XPT™ series parts with Active status. IXXH50N60B3D1 offers the highest current rating (120A) and power dissipation (600W) among all substitutes, with the lowest turn-off delay (100ns). IXGH36N60B3 provides a mid-range alternative with 92A current rating and 250W power.

Not For New Designs Status:

The IKW50N60DTPXKSA1 (Infineon TrenchStop™) carries Not For New Designs status and should be used only for legacy system support or replacement applications.

Limited Current Rating:

The NGTB45N60S2WG (onsemi) is rated at 45A continuous current, which is below the 96A specification of the original part. This substitute is suitable only for applications with reduced current requirements.

Compliance Verification:

All substitute parts listed maintain ROHS3 compliance and REACH unaffected status, matching the regulatory posture of the original IRGP4063DPBF.

Frequently Asked Questions (FAQ)

Q: Can IXXH50N60B3D1 directly replace IRGP4063DPBF in existing PCB layouts?

A: Yes, both parts use the TO-247-3 through-hole package. Pin configuration is identical. Thermal performance may improve due to higher power rating (600W versus 330W). Verify gate drive circuit compatibility with the 70nC gate charge specification.

Q: Why does APT54GA60BD30 have significantly lower gate charge (28nC) than the original part (95nC)?

A: APT54GA60BD30 uses PT (Punch-Through) IGBT technology, which differs from the Trench technology of IRGP4063DPBF. Lower gate charge reduces switching losses and enables faster switching transitions. Gate drive circuits must be verified for compatibility with this lower charge requirement.

Q: Is STGW60H65DFB suitable for 600V applications, or does the 650V rating create compatibility issues?

A: The 650V rating is a higher voltage specification and is fully compatible with 600V system designs. The part will operate safely in 600V applications with additional voltage margin. No circuit modifications are required.

Q: What is the impact of using IXGH36N60B3 (92A) instead of the original 96A part?

A: IXGH36N60B3 is rated 4A lower than the original specification. This substitute is acceptable only if system current requirements do not exceed 92A continuous operation. Verify actual application current draw before selection.

Q: Why is NGTB45N60S2WG listed as a substitute if it is rated at only 45A?

A: NGTB45N60S2WG meets the voltage (600V) and package (TO-247-3) criteria but falls below the current rating envelope. This part is listed as a substitute only for applications with reduced current requirements or where current derating is acceptable.

Q: Can IKW50N60DTPXKSA1 be used in new product designs?

A: IKW50N60DTPXKSA1 carries Not For New Designs status. This part should be used only for replacement or legacy system support. New designs should select from Active status alternatives: STGW60H65DFB, APT54GA60BD30, IXGH36N60B3, or IXXH50N60B3D1.

Q: What are the key differences between Trench and PT IGBT technologies in these substitutes?

A: The provided data specifies IGBT type for each part but does not include detailed technology comparison parameters. Selection should be based on the electrical specifications provided in the Parameter Comparison table, particularly gate charge, switching delays, and reverse recovery time.

Q: Are all substitute parts available in the same packaging options as IRGP4063DPBF?

A: All listed substitutes use TO-247-3 through-hole package configuration. Packaging variants (Tube, Bulk) differ by supplier but do not affect electrical or mechanical compatibility. Verify packaging availability with component suppliers for procurement requirements.

Q: What is the minimum operating temperature difference between IRGP4063DPBF and substitute parts?

A: IRGP4063DPBF operates from -55°C to 175°C. IKW50N60DTPXKSA1 has a minimum of -40°C (15°C higher limit). APT54GA60BD30, IXGH36N60B3 have maximum of 150°C (25°C lower limit). Verify application temperature requirements before final selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message