IRG4PC60UPBF IGBT 600V 75A Equivalent & Substitute Parts

Part Overview

The IRG4PC60UPBF is an Infineon Technologies IGBT rated for 600V collector-emitter breakdown voltage, 75A continuous collector current, and 520W maximum power dissipation in a TO-247AC through-hole package. This device is classified as obsolete product status. Due to its obsolete classification, equivalent substitute parts from active manufacturers are necessary to maintain design continuity and ensure long-term supply chain reliability for new production and redesign applications.

Substiute Parts

IRG4PC60UPBF

Infineon TechnologiesIn Stock: 1495IRG4PC60UPBF Datasheet

Current PartRFQ

IXGK72N60B3H1

IXYSIn Stock: 52753IXGK72N60B3H1 Datasheet

MFR RecommendedRFQ

IXGR72N60B3H1

IXYSIn Stock: 1931IXGR72N60B3H1 Datasheet

MFR RecommendedRFQ

STGW20NC60V

STMicroelectronicsIn Stock: 1317STGW20NC60V Datasheet

MFR RecommendedRFQ

STGW20NC60VD

STMicroelectronicsIn Stock: 27395STGW20NC60VD Datasheet

MFR RecommendedRFQ

STGW40H65FB

STMicroelectronicsIn Stock: 2870STGW40H65FB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IRG4PC60UPBF is determined by the following critical electrical and mechanical parameters:

Primary Matching Criteria:

• Voltage - Collector Emitter Breakdown: 600V minimum (600V or 650V acceptable)
• Current - Collector (Ic): 75A or higher
• Mounting Type: Through Hole
• Package compatibility: TO-247 family packages (TO-247-3, TO-247AC, ISOPLUS247™, TO-264)
• Operating Temperature Range: -55°C to 150°C minimum

Secondary Compatibility Factors:

• Input Type: Standard gate drive
• RoHS3 Compliance: Required
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute parts listed below meet or exceed these criteria within the allowed parameter ranges. Substitutes are grouped by their electrical performance characteristics and package form factors.

Parameter Comparison

Engineering Selection Recommendations

IXGK72N60B3H1 (IXYS GenX3™ Series)

This substitute provides the closest electrical match to the IRG4PC60UPBF with 600V/75A ratings and superior performance characteristics. The IXGK72N60B3H1 offers higher pulsed current capability (450A vs. 300A), lower on-state voltage (1.8V vs. 2V), and faster switching times (31ns/152ns vs. 39ns/200ns). Active product status ensures long-term availability. Package form is TO-264, which requires PCB layout verification for pin compatibility. RoHS3 compliance and MSL-1 rating match the original specification.

IXGR72N60B3H1 (IXYS GenX3™ Series)

This IXYS substitute maintains identical electrical ratings (600V/75A) with the same performance advantages as the IXGK72N60B3H1 but in TO-247-3 package form, providing direct mechanical compatibility with the IRG4PC60UPBF footprint. Power rating is reduced to 200W, which may limit applications requiring the full 520W dissipation capability. Active product status and RoHS3 compliance are confirmed.

STGW20NC60V and STGW20NC60VD (STMicroelectronics PowerMESH™ Series)

These STMicroelectronics substitutes operate at 600V but with reduced continuous current rating (60A vs. 75A). Both devices are suitable for applications where 60A continuous current is acceptable. The STGW20NC60VD variant includes reverse recovery time specification (44ns) and higher pulsed current (150A vs. 100A). Both maintain TO-247-3 package compatibility and active product status. Power rating is 200W, limiting high-dissipation applications.

STGW40H65FB (STMicroelectronics Trench Field Stop)

This substitute operates at elevated voltage (650V vs. 600V) with higher continuous current (80A vs. 75A) and extended temperature range (-55°C to 175°C vs. 150°C). The Trench Field Stop technology provides different switching characteristics. Power rating of 283W is below the original 520W specification. TO-247-3 package ensures mechanical compatibility. Active product status and RoHS3 compliance are confirmed.

Frequently Asked Questions (FAQ)

Q: Can STGW20NC60V or STGW20NC60VD be used as direct replacements for IRG4PC60UPBF?

A: These parts meet the 600V voltage requirement and TO-247-3 package compatibility but have reduced continuous current rating (60A vs. 75A). They are suitable substitutes only for applications where 60A continuous current is sufficient. Power dissipation capability is also reduced to 200W.

Q: What is the difference between IXGK72N60B3H1 and IXGR72N60B3H1?

A: Both parts have identical electrical ratings (600V/75A) and performance characteristics. The primary difference is package form: IXGK72N60B3H1 uses TO-264 package, while IXGR72N60B3H1 uses TO-247-3 package. The TO-247-3 variant (IXGR72N60B3H1) provides direct footprint compatibility with the IRG4PC60UPBF.

Q: Is STGW40H65FB compatible with 600V circuit designs?

A: STGW40H65FB is rated for 650V collector-emitter breakdown voltage, which exceeds the 600V requirement. It is electrically compatible with 600V circuit designs. However, the higher voltage rating and different IGBT technology (Trench Field Stop) may affect switching behavior and thermal characteristics. Circuit validation is necessary for critical applications.

Q: Why do some substitutes have lower power ratings than the IRG4PC60UPBF?

A: Power rating depends on thermal design, package thermal resistance, and maximum junction temperature. IXGR72N60B3H1 and STMicroelectronics parts have lower power ratings (200-283W vs. 520W) due to different thermal characteristics and package design. Applications requiring full 520W dissipation should prioritize IXGK72N60B3H1 (540W) or STGW40H65FB (283W).

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts (IXGK72N60B3H1, IXGR72N60B3H1, STGW20NC60V, STGW20NC60VD, STGW40H65FB) are ROHS3 compliant and have MSL-1 (Unlimited) moisture sensitivity rating, matching the original IRG4PC60UPBF specification.

Q: What is the primary advantage of IXYS GenX3™ series substitutes?

A: IXYS GenX3™ parts (IXGK72N60B3H1 and IXGR72N60B3H1) provide superior switching performance with lower gate charge (225nC vs. 310nC), faster switching times (31ns/152ns vs. 39ns/200ns), and lower on-state voltage (1.8V vs. 2V). These characteristics reduce switching losses and improve overall circuit efficiency.

Q: Can STGW40H65FB be used in applications designed for 600V operation?

A: Yes. STGW40H65FB is rated for 650V, which provides margin above the 600V design requirement. However, the higher voltage rating does not automatically make it suitable for all applications. The Trench Field Stop technology and different switching characteristics require circuit validation, particularly for timing-sensitive applications.

Q: What package considerations apply when selecting a substitute?

A: The IRG4PC60UPBF uses TO-247-3 package. IXGR72N60B3H1 and STMicroelectronics parts maintain TO-247-3 compatibility for direct footprint replacement. IXGK72N60B3H1 uses TO-264 package, requiring PCB layout modification. IXGR72N60B3H1 uses ISOPLUS247™ package variant, which is mechanically compatible with TO-247-3 footprints.