IRFS7530-7PPBF N-Channel 60V 240A MOSFET Equivalent & Substitute Parts

Part Overview

The IRFS7530-7PPBF is an N-Channel MOSFET manufactured by Infineon Technologies, rated for 60V drain-to-source voltage and 240A continuous drain current at 25°C. This device is part of the HEXFET® and StrongIRFET™ series and is housed in a D2PAK (TO-263-7) surface mount package with 7 leads. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent and substitute components that maintain electrical and mechanical compatibility for existing designs.

Substiute Parts

IRFS7530-7PPBF

Infineon TechnologiesIn Stock: 1433IRFS7530-7PPBF Datasheet

Current PartRFQ

IRFS7530TRL7PP

Infineon TechnologiesIn Stock: 18717IRFS7530TRL7PP Datasheet

DirectRFQ

IPB014N06NATMA1

Infineon TechnologiesIn Stock: 3152IPB014N06NATMA1 Datasheet

MFR RecommendedRFQ

IPB016N06L3GATMA1

Infineon TechnologiesIn Stock: 10488IPB016N06L3GATMA1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IRFS7530-7PPBF is determined by strict equivalence in the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Drain-to-Source Voltage (Vdss): Must equal 60V
• Package Type: Must be D2PAK (TO-263-7) surface mount
• FET Type: Must be N-Channel MOSFET
• Mounting: Must be surface mount compatible

Secondary Compatibility Parameters:

• Continuous Drain Current (Id): Minimum 240A at 25°C (Tc rating)
• Rds On (Max): Must not exceed 1.4 mOhm @ 100A, 10V
• Gate Threshold Voltage: Operating range -55°C to 175°C (TJ)
• RoHS Compliance: ROHS3 Compliant

Substitute parts are grouped based on whether they meet all primary criteria and maintain electrical performance within the specified secondary parameters. Parts that deviate from these criteria are classified as functional alternatives with noted trade-offs.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Recommended Primary Substitute):

IRFS7530TRL7PP is the direct equivalent to IRFS7530-7PPBF. Both devices share identical electrical specifications including 240A continuous drain current, 1.4 mOhm Rds On, and 375W power dissipation. The primary difference is packaging format: IRFS7530TRL7PP is supplied in Cut Tape (CT) and Digi-Reel® format versus the original part's standard packaging. IRFS7530TRL7PP maintains active product status and full ROHS3 compliance. This substitute provides seamless design compatibility with no electrical or thermal performance trade-offs.

Functional Alternatives (Reduced Current Rating):

IPB014N06NATMA1 and IPB016N06L3GATMA1 are functional alternatives from Infineon's OptiMOS™ series. Both devices maintain 60V Vdss rating and D2PAK (TO-263-7) package compatibility. However, both alternatives operate at reduced continuous drain current ratings (180A versus 240A), resulting in lower power dissipation capabilities (214W and 250W respectively versus 375W). These parts are suitable for applications where the 240A current requirement is not critical. IPB014N06NATMA1 maintains 1.4 mOhm Rds On matching the original specification, while IPB016N06L3GATMA1 exhibits slightly higher Rds On at 1.6 mOhm. Both alternatives carry active product status and ROHS3 compliance.

Selection Criteria:

• Use IRFS7530TRL7PP for direct replacement requiring 240A continuous current capability
• Use IPB014N06NATMA1 or IPB016N06L3GATMA1 only if application current requirements are 180A or lower
• All substitutes maintain -55°C to 175°C operating temperature range
• All substitutes are ROHS3 compliant and REACH unaffected

Frequently Asked Questions (FAQ)

Q: Can IRFS7530TRL7PP be used as a direct replacement for IRFS7530-7PPBF?

A: Yes. IRFS7530TRL7PP is electrically and mechanically identical to IRFS7530-7PPBF. Both devices feature 60V Vdss, 240A continuous drain current, 1.4 mOhm Rds On, and identical gate charge characteristics. The only difference is packaging format (Cut Tape/Digi-Reel versus standard packaging). PCB layout and thermal management requirements remain unchanged.

Q: What is the key difference between IRFS7530-7PPBF and the OptiMOS™ alternatives?

A: The primary difference is continuous drain current rating. IRFS7530-7PPBF and IRFS7530TRL7PP are rated for 240A (Tc), while IPB014N06NATMA1 and IPB016N06L3GATMA1 are rated for 180A (Tc). This results in lower maximum power dissipation for the OptiMOS™ devices. Both series maintain identical 60V Vdss and D2PAK package compatibility.

Q: Are all substitute parts RoHS compliant?

A: Yes. IRFS7530TRL7PP, IPB014N06NATMA1, and IPB016N06L3GATMA1 are all ROHS3 compliant. All parts are REACH unaffected and carry EAR99 ECCN classification.

Q: Can IPB014N06NATMA1 or IPB016N06L3GATMA1 be used in applications requiring 240A continuous current?

A: No. These OptiMOS™ devices are rated for maximum 180A continuous drain current at 25°C (Tc). Using them in 240A applications exceeds their rated specifications and may result in thermal runaway or device failure. Use only if application current requirements are 180A or lower.

Q: What is the difference between IPB014N06NATMA1 and IPB016N06L3GATMA1?

A: Both are 60V, 180A OptiMOS™ devices in D2PAK packages. IPB014N06NATMA1 maintains 1.4 mOhm Rds On (matching the original IRFS7530-7PPBF specification), while IPB016N06L3GATMA1 has 1.6 mOhm Rds On. IPB014N06NATMA1 also features lower gate charge (106 nC versus 166 nC), resulting in faster switching characteristics. IPB016N06L3GATMA1 provides higher input capacitance (28000 pF versus 7800 pF).

Q: Are there any thermal management differences between these devices?

A: Yes. IRFS7530-7PPBF and IRFS7530TRL7PP support 375W maximum power dissipation at case temperature (Tc). IPB014N06NATMA1 supports 214W (Tc), and IPB016N06L3GATMA1 supports 250W (Tc). Thermal design and heatsinking requirements must be adjusted accordingly for OptiMOS™ alternatives.

Q: What packaging formats are available for each part?

A: IRFS7530-7PPBF uses standard D2PAK packaging. IRFS7530TRL7PP is supplied in Cut Tape (CT) and Digi-Reel® format. IPB014N06NATMA1 is supplied in Cut Tape (CT) and Digi-Reel® format. IPB016N06L3GATMA1 is supplied in Tape & Reel (TR) format. All use identical D2PAK (TO-263-7) physical package with 7 leads.