IRFS3004-7PPBF N-Channel 40V 240A MOSFET Equivalent & Substitute Parts

Part Overview

The IRFS3004-7PPBF is an N-Channel MOSFET manufactured by Infineon Technologies, rated for 40V drain-to-source voltage with 240A continuous drain current at 25°C. This device is packaged in a D2PAK (TO-263-7) surface mount configuration and is designed for high-current switching applications. The part is currently discontinued at DiGi Electronics, making equivalent substitute parts necessary for ongoing design support and procurement.

Key Parameters

Parameter	Value	Unit
Drain-to-Source Voltage (Vdss)	40	V
Continuous Drain Current (Id) @ 25°C	240	A
On-State Resistance (Rds On Max) @ 10V	1.25	mOhm
Gate Threshold Voltage (Vgs th) Max	4	V
Power Dissipation (Max)	380	W
Operating Temperature Range	-55 to 175	°C
Package Type	D2PAK (TO-263-7)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the IRFS3004-7PPBF is determined by the following critical parameters:

Electrical Compatibility Requirements:

Drain-to-Source Voltage (Vdss): Must equal or exceed 40V
Continuous Drain Current (Id): Must support the application's current requirements
On-State Resistance (Rds On): Lower values indicate better performance; higher values increase power dissipation
Gate Threshold Voltage (Vgs th): Must be compatible with gate drive circuitry
Operating Temperature Range: Must span -55°C to 175°C minimum

Mechanical Compatibility Requirements:

Package Type: D2PAK (TO-263-7) or equivalent surface mount packages
Mounting Type: Surface mount configuration
Lead count and pinout: Must be compatible with PCB layout

Regulatory Compliance:

RoHS3 Compliance: Required for environmental standards
Moisture Sensitivity Level (MSL): Level 1 (Unlimited) preferred

The three substitute parts listed below meet these criteria with varying performance characteristics and availability status.

Parameter Comparison

Parameter	IRFS3004-7PPBF	IPB180N04S401ATMA1	IPB180N04S4H0ATMA1	STH320N4F6-6
Manufacturer	Infineon Technologies	Infineon Technologies	Infineon Technologies	STMicroelectronics
Vdss (V)	40	40	40	40
Id @ 25°C (A)	240	180	180	200
Rds On Max @ 10V (mOhm)	1.25	1.3	1.1	1.3
Vgs th Max @ Id (V)	4	4	4	4
Gate Charge Qg @ 10V (nC)	240	176	225	240
Power Dissipation Max (W)	380	188	250	300
Operating Temperature (°C)	-55 to 175	-55 to 175	-55 to 175	-55 to 175
Package	D2PAK (TO-263-7)	PG-TO263-7-3	PG-TO263-7-3	H2PAK-6
Product Status	Discontinued	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

IPB180N04S401ATMA1 (Infineon Technologies, OptiMOS™ Series)

This substitute is an active product from Infineon Technologies with ROHS3 compliance and unlimited moisture sensitivity rating. It provides 180A continuous drain current at 40V with 1.3mOhm on-state resistance. The lower current rating (180A vs. 240A) and reduced power dissipation (188W vs. 380W) make this suitable for applications where the full 240A capability is not required. Packaging is PG-TO263-7-3, compatible with D2PAK footprints. This option is appropriate for designs with reduced current demands or thermal constraints.

IPB180N04S4H0ATMA1 (Infineon Technologies, OptiMOS™ Series)

This active product offers improved on-state resistance of 1.1mOhm at 10V, the lowest among all options, resulting in reduced conduction losses. It maintains 180A continuous drain current and 40V rating with 250W power dissipation capability. The higher gate charge (225nC) and input capacitance (17940pF) compared to the original part may require gate drive circuit evaluation. ROHS3 compliance and unlimited MSL rating are maintained. This option is suitable for efficiency-critical applications where lower Rds On is prioritized.

STH320N4F6-6 (STMicroelectronics, DeepGATE™/STripFET™ VI Series)

This active product from STMicroelectronics provides 200A continuous drain current at 40V with 1.3mOhm on-state resistance and 300W power dissipation. The H2PAK-6 package differs from the D2PAK footprint of the original part, requiring PCB layout modification. This device carries AEC-Q101 automotive qualification and is suitable for automotive-grade applications. ROHS3 compliance and unlimited MSL rating apply. High inventory availability (25,400 pcs) supports procurement reliability.

All three substitutes maintain the 40V Vdss rating, -55°C to 175°C operating temperature range, and regulatory compliance of the original part. Selection depends on current requirements, thermal budget, package compatibility, and application-specific certifications.

Frequently Asked Questions (FAQ)

Q: Can I use IPB180N04S401ATMA1 or IPB180N04S4H0ATMA1 as direct replacements for IRFS3004-7PPBF?

A: These Infineon OptiMOS™ parts are electrically compatible substitutes for applications requiring up to 180A continuous drain current at 40V. Both maintain the same Vdss, Vgs th, and operating temperature range. The PG-TO263-7-3 package is compatible with D2PAK PCB footprints. However, the reduced current rating (180A vs. 240A) and power dissipation must be evaluated against your application's requirements.

Q: What is the difference between IPB180N04S401ATMA1 and IPB180N04S4H0ATMA1?

A: Both are 40V, 180A OptiMOS™ devices with identical electrical ratings. The key difference is on-state resistance: IPB180N04S4H0ATMA1 has 1.1mOhm (lower losses) versus IPB180N04S401ATMA1 at 1.3mOhm. IPB180N04S4H0ATMA1 also has higher power dissipation capability (250W vs. 188W) and higher gate charge (225nC vs. 176nC). Choose IPB180N04S4H0ATMA1 for efficiency-critical designs; choose IPB180N04S401ATMA1 for cost-optimized applications.

Q: Can I use STH320N4F6-6 as a substitute?

A: STH320N4F6-6 is electrically compatible at 40V and 200A continuous drain current. However, the H2PAK-6 package differs from the D2PAK (TO-263-7) package of the original part, requiring PCB layout redesign. This substitute is suitable if your design can accommodate package changes. The device includes AEC-Q101 automotive qualification, making it appropriate for automotive applications.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All three substitute parts—IPB180N04S401ATMA1, IPB180N04S4H0ATMA1, and STH320N4F6-6—are ROHS3 compliant with MSL Level 1 (Unlimited) moisture sensitivity rating, matching the original IRFS3004-7PPBF specifications.

Q: What happens if my application requires the full 240A rating of the original part?

A: The Infineon OptiMOS™ substitutes (IPB180N04S401ATMA1 and IPB180N04S4H0ATMA1) are rated for 180A maximum. STH320N4F6-6 provides 200A, which is closer but still below 240A. For applications requiring the full 240A capability, alternative high-current 40V MOSFETs outside this substitute list must be evaluated. Consult with component distributors for additional options meeting the 240A requirement.

Q: Do I need to modify my PCB layout for these substitutes?

A: IPB180N04S401ATMA1 and IPB180N04S4H0ATMA1 use PG-TO263-7-3 packaging, compatible with existing D2PAK footprints without layout changes. STH320N4F6-6 uses H2PAK-6 packaging, which requires PCB footprint modification. Verify pinout compatibility and thermal pad dimensions before finalizing layout changes.

Q: What is the gate charge difference, and does it affect my gate drive circuit?

A: The original IRFS3004-7PPBF has 240nC gate charge at 10V. IPB180N04S401ATMA1 has 176nC (lower), IPB180N04S4H0ATMA1 has 225nC (similar), and STH320N4F6-6 has 240nC (identical). Lower gate charge reduces switching losses and gate drive power requirements. If your gate drive circuit is optimized for the original 240nC specification, the lower values in IPB180N04S401ATMA1 provide margin; higher values in IPB180N04S4H0ATMA1 require circuit evaluation.

Q: Which substitute has the best availability?

A: STH320N4F6-6 has the highest inventory availability at 25,400 pieces. IPB180N04S4H0ATMA1 has 2,200 pieces, and IPB180N04S401ATMA1 has 2,251 pieces available. For procurement reliability, STH320N4F6-6 is the preferred option if package compatibility can be accommodated.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message