IRFR024TRL N-Channel 60V 14A MOSFET DPAK Equivalent & Substitute Parts

Part Overview

The IRFR024TRL is an N-Channel metal oxide semiconductor field-effect transistor (MOSFET) manufactured by Vishay Siliconix, rated for 60V drain-to-source voltage and 14A continuous drain current in a surface mount DPAK package. This device is classified as obsolete product status. Equivalent and substitute parts are necessary to support ongoing production requirements, design updates, and supply chain continuity where the original part number is no longer available or preferred.

Key Parameters

Parameter	Value	Unit
FET Type	N-Channel	—
Drain to Source Voltage (Vdss)	60	V
Continuous Drain Current (Id) @ 25°C	14	A (Tc)
Rds On (Max) @ Id, Vgs	100 mOhm @ 8.4A, 10V	—
Gate Threshold Voltage Vgs(th) (Max)	4	V @ 250µA
Gate Charge (Qg) (Max)	25	nC @ 10V
Input Capacitance (Ciss) (Max)	640	pF @ 25V
Power Dissipation (Max)	2.5W (Ta), 42W (Tc)	—
Operating Temperature Range	-55 to 150	°C (TJ)
Mounting Type	Surface Mount	—
Package / Case	TO-252-3, DPAK (2 Leads + Tab), SC-63	—
RoHS Status	RoHS non-compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the IRFR024TRL are grouped based on strict electrical and mechanical parameter compatibility. The primary substitution criteria are:

Electrical Parameters (Must Match or Exceed):

Drain to Source Voltage (Vdss): 60V minimum
Continuous Drain Current (Id): 14A minimum at 25°C
Gate Threshold Voltage (Vgs(th)): 4V maximum
Maximum Gate-Source Voltage (Vgs): ±20V
On-state resistance (Rds On): 100 mOhm or lower at specified conditions
Operating Temperature Range: -55°C to 150°C minimum

Mechanical Parameters (Must Match):

Mounting Type: Surface Mount
Package / Case: TO-252-3, DPAK (2 Leads + Tab), SC-63 or equivalent

Substitute parts are classified into two categories:

Parametric Equivalents (Vishay Siliconix): Parts with identical electrical specifications and DPAK packaging, including IRFR020TRPBF, IRFR020TRR, IRFR024TRLPBF, IRFR024TRPBF, IRFR024TRR, and SIHFR024-GE3. These parts maintain full functional compatibility with the original design.

Manufacturer Recommended Alternatives: Parts from alternative manufacturers (Infineon Technologies, Rohm Semiconductor, STMicroelectronics) that meet or exceed the electrical requirements while maintaining DPAK package compatibility. These include IRFR024NTRLPBF, IRFR024NTRPBF, RSD080N06TL, and STD12NF06T4.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Vgs(th) (V)	Qg (nC)	Ciss (pF)	Power Dissipation (W)	Temp Range (°C)	Package	Product Status	RoHS
IRFR024TRL	Vishay Siliconix	60	14 (Tc)	100 @ 8.4A, 10V	4 @ 250µA	25 @ 10V	640 @ 25V	2.5 (Ta), 42 (Tc)	-55 to 150	DPAK	Obsolete	Non-compliant
IRFR020TRPBF	Vishay Siliconix	60	14 (Tc)	100 @ 8.4A, 10V	4 @ 250µA	25 @ 10V	640 @ 25V	2.5 (Ta), 42 (Tc)	-55 to 150	DPAK	Active	ROHS3 Compliant
IRFR020TRR	Vishay Siliconix	60	14 (Tc)	100 @ 8.4A, 10V	4 @ 250µA	25 @ 10V	640 @ 25V	2.5 (Ta), 42 (Tc)	-55 to 150	DPAK	Active	Non-compliant
IRFR024TRLPBF	Vishay Siliconix	60	14 (Tc)	100 @ 8.4A, 10V	4 @ 250µA	25 @ 10V	640 @ 25V	2.5 (Ta), 42 (Tc)	-55 to 150	DPAK	Active	ROHS3 Compliant
IRFR024TRPBF	Vishay Siliconix	60	14 (Tc)	100 @ 8.4A, 10V	4 @ 250µA	25 @ 10V	640 @ 25V	2.5 (Ta), 42 (Tc)	-55 to 150	DPAK	Active	ROHS3 Compliant
IRFR024TRR	Vishay Siliconix	60	14 (Tc)	100 @ 8.4A, 10V	4 @ 250µA	25 @ 10V	640 @ 25V	2.5 (Ta), 42 (Tc)	-55 to 150	DPAK	Active	Non-compliant
SIHFR024-GE3	Vishay Siliconix	60	14 (Tc)	100 @ 8.4A, 10V	4 @ 250µA	25 @ 10V	640 @ 25V	2.5 (Ta), 42 (Tc)	-55 to 150	TO-252AA	Active	Not specified
IRFR024NTRLPBF	Infineon Technologies	55	17 (Tc)	75 @ 10A, 10V	4 @ 250µA	20 @ 10V	370 @ 25V	45 (Tc)	-55 to 175	DPAK	Not For New Designs	ROHS3 Compliant
IRFR024NTRPBF	Infineon Technologies	55	17 (Tc)	75 @ 10A, 10V	4 @ 250µA	20 @ 10V	370 @ 25V	45 (Tc)	-55 to 175	DPAK	Active	ROHS3 Compliant
RSD080N06TL	Rohm Semiconductor	60	8 (Ta)	80 @ 8A, 10V	2.5 @ 1mA	9.4 @ 10V	380 @ 10V	15 (Tc)	-55 to 150	CPT3	Active	ROHS3 Compliant
STD12NF06T4	STMicroelectronics	60	12 (Tc)	100 @ 6A, 10V	4 @ 250µA	12 @ 10V	315 @ 25V	30 (Tc)	-55 to 175	DPAK	Active	ROHS3 Compliant

Engineering Selection Recommendations

Direct Parametric Equivalents (Preferred for Existing Designs):

IRFR024TRLPBF and IRFR024TRPBF are direct parametric equivalents manufactured by Vishay Siliconix with identical electrical specifications to the IRFR024TRL. Both parts are in active product status and ROHS3 compliant, making them suitable for new production and design updates. IRFR024TRLPBF is available in Tape & Reel packaging with 4,079 units in stock, while IRFR024TRPBF is available in Tape & Reel with 25,400 units in stock. These parts maintain full functional compatibility with existing circuit designs.

IRFR020TRPBF is an alternative Vishay Siliconix part with identical electrical specifications, active product status, and ROHS3 compliance. This part is available in Tape & Reel packaging with 30,100 units in stock, offering superior supply availability.

Alternative Manufacturer Options (For Design Flexibility):

IRFR024NTRPBF (Infineon Technologies) is an active product with enhanced specifications including 17A continuous drain current (versus 14A), lower on-state resistance (75 mOhm versus 100 mOhm), and extended operating temperature range (-55°C to 175°C). This part is ROHS3 compliant and available in high volume (205,200 units in stock). The reduced Vdss rating (55V versus 60V) is acceptable for applications with design margins below 60V.

STD12NF06T4 (STMicroelectronics) provides 12A continuous drain current with 60V Vdss rating, active product status, and ROHS3 compliance. This part is suitable for applications where 12A current capacity is sufficient and offers extended temperature range (-55°C to 175°C).

Limited Current Applications:

RSD080N06TL (Rohm Semiconductor) is rated for 8A continuous drain current, which is below the 14A specification of the IRFR024TRL. This part is suitable only for applications with reduced current requirements and is not recommended as a direct substitute for full-specification designs.

Compliance Considerations:

For new designs requiring RoHS3 compliance, IRFR024TRLPBF, IRFR024TRPBF, IRFR020TRPBF, IRFR024NTRPBF, STD12NF06T4, and RSD080N06TL are all compliant options. The original IRFR024TRL is RoHS non-compliant and should not be used in new designs subject to RoHS requirements.

Frequently Asked Questions (FAQ)

Q: Can IRFR024TRLPBF be used as a direct replacement for IRFR024TRL?

A: Yes. IRFR024TRLPBF is a direct parametric equivalent with identical electrical specifications (60V Vdss, 14A Id, 100 mOhm Rds On, 4V Vgs(th), 25 nC Qg, 640 pF Ciss) and the same DPAK package. The primary differences are product status (active versus obsolete) and RoHS compliance (ROHS3 compliant versus non-compliant). No circuit modifications are required.

Q: What is the difference between IRFR024TRPBF and IRFR024TRLPBF?

A: Both parts are direct parametric equivalents with identical electrical specifications and DPAK packaging. The difference is in packaging format: IRFR024TRLPBF is supplied in Tape & Reel (TR) format with 4,079 units in stock, while IRFR024TRPBF is also supplied in Tape & Reel format with significantly higher inventory (25,400 units). Both are ROHS3 compliant and active products.

Q: Can IRFR024NTRPBF (Infineon) replace IRFR024TRL in all applications?

A: IRFR024NTRPBF meets or exceeds the electrical requirements of IRFR024TRL with higher drain current (17A versus 14A), lower on-state resistance (75 mOhm versus 100 mOhm), and extended temperature range (-55°C to 175°C). However, the Vdss rating is 55V versus 60V. This part is suitable for applications where the circuit design includes adequate voltage margin below 55V. The DPAK package is compatible. IRFR024NTRPBF is active product status and ROHS3 compliant.

Q: Is STD12NF06T4 a suitable substitute for IRFR024TRL?

A: STD12NF06T4 is suitable only for applications where 12A continuous drain current is sufficient. The part provides 60V Vdss (matching the original), but the 14A specification of IRFR024TRL cannot be fully utilized. STD12NF06T4 offers advantages including active product status, ROHS3 compliance, extended temperature range (-55°C to 175°C), and DPAK package compatibility. Use this part only when design requirements allow for reduced current capacity.

Q: Why is RSD080N06TL not recommended as a direct substitute?

A: RSD080N06TL is rated for only 8A continuous drain current, which is significantly below the 14A specification of IRFR024TRL. While the part provides 60V Vdss and DPAK package compatibility, it cannot support the full current requirements of designs based on the original IRFR024TRL. This part is suitable only for applications with reduced current requirements (8A or less).

Q: What is the difference between IRFR020TRPBF and IRFR024TRPBF?

A: Both parts are parametric equivalents with identical electrical specifications (60V Vdss, 14A Id, 100 mOhm Rds On). The base product numbers differ (IRFR020 versus IRFR024), but the electrical performance is equivalent. IRFR020TRPBF offers superior supply availability (30,100 units in stock versus 25,400 for IRFR024TRPBF). Both are ROHS3 compliant and active products in DPAK packaging.

Q: Are there any package compatibility issues between IRFR024TRL and its substitutes?

A: The IRFR024TRL uses TO-252-3 DPAK (2 Leads + Tab) packaging. All recommended Vishay Siliconix and Infineon substitutes use identical DPAK packaging and are pin-compatible. SIHFR024-GE3 uses TO-252AA packaging, which is functionally equivalent to DPAK. RSD080N06TL uses CPT3 packaging, which is also compatible with DPAK footprints. No PCB layout modifications are required for any of these substitutes.

Q: Which substitute offers the best supply availability?

A: IRFR024NTRPBF (Infineon Technologies) offers the highest inventory with 205,200 units in stock. IRFR024TRPBF (Vishay Siliconix) is the second option with 25,400 units. IRFR020TRPBF (Vishay Siliconix) provides 30,100 units. For applications requiring immediate availability, IRFR024NTRPBF is the preferred choice.

Q: Are all substitute parts RoHS3 compliant?

A: Most recommended substitutes are ROHS3 compliant, including IRFR024TRLPBF, IRFR024TRPBF, IRFR020TRPBF, IRFR024NTRLPBF, IRFR024NTRPBF, RSD080N06TL, and STD12NF06T4. IRFR020TRR and IRFR024TRR are RoHS non-compliant. For new designs subject to RoHS requirements, select only ROHS3 compliant parts.

Q: What is the operating temperature range difference between IRFR024TRL and its substitutes?

A: IRFR024TRL operates from -55°C to 150°C. Most Vishay Siliconix equivalents maintain this range. Infineon IRFR024NTRLPBF and IRFR024NTRPBF extend the range to -55°C to 175°C. STMicroelectronics STD12NF06T4 also extends to -55°C to 175°C. Rohm RSD080N06TL operates to 150°C. For applications requiring extended high-temperature operation, Infineon or STMicroelectronics options are preferred.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message