IRFD9113 Equivalent & Substitute Parts Reference

Part Overview

The IRFD9113 is a P-channel MOSFET transistor with a maximum drain-to-source voltage of 60 V and continuous drain current of 600 mA, housed in a through-hole 4-DIP (0.300", 7.62mm) HVMDIP package. Manufactured by Vishay Siliconix, IRFD9113 falls under the category of Transistors, FETs, MOSFETs. The part is currently obsolete and RoHS non-compliant, leading to the necessity for suitable substitute or replacement models for ongoing designs or maintenance.

Substiute Parts

IRFD9113

Vishay SiliconixIn Stock: 1522IRFD9113 Datasheet

Current PartRFQ

IRFD9014PBF

Vishay SiliconixIn Stock: 2345IRFD9014PBF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute selection for IRFD9113 is performed strictly based on identical or superior electrical and mechanical key parameters. The critical criteria are:

• P-Channel MOSFET type with MOSFET (Metal Oxide) technology
• Drain-to-Source Voltage (Vdss): 60 V
• Continuous Drain Current (Id): Minimum 600 mA (Ta)
• Rds On (Max): ≤ 1.6 Ohm at comparable guaranteed conditions
• Matching through-hole mounting, 4-HVMDIP / 4-DIP (0.300", 7.62mm) package
• Equivalent or improved gate charge (Qg) and input capacitance (Ciss)
• RoHS and MSL status for compliance where applicable
• Direct mechanical compatibility and pinout

Parameter Comparison

Engineering Selection Recommendations

The IRFD9113 is obsolete and RoHS non-compliant, while IRFD9014PBF is an active, ROHS3 compliant P-channel MOSFET from the same manufacturer, with equivalent or superior electrical characteristics and mechanical compatibility. IRFD9014PBF matches the package, mounting style, voltage ratings, and exceeds the required current and Rds(on) parameters. The substitute also provides enhanced compliance with current environmental standards.

Frequently Asked Questions (FAQ)

Q: What are the minimum substitution criteria for replacing IRFD9113?
A: The substitute must be a P-channel MOSFET, 60 V Vdss, through-hole 4-DIP (0.300", 7.62mm) package, with continuous drain current of at least 600mA, and Rds(on) maximum not exceeding 1.6 Ohm at corresponding test conditions.

Q: Are there differences in pinout or mechanical compatibility between IRFD9113 and IRFD9014PBF?
A: Both models use the through-hole 4-HVMDIP / 4-DIP (0.300", 7.62mm) package, ensuring direct mechanical and pinout compatibility.

Q: Does IRFD9014PBF offer compliance certifications not present in IRFD9113?
A: Yes, IRFD9014PBF is ROHS3 compliant, while IRFD9113 is RoHS non-compliant.

Q: Can IRFD9014PBF handle higher current than IRFD9113?
A: Yes, IRFD9014PBF supports up to 1.1 A (Ta), which exceeds the 600 mA (Ta) of IRFD9113.

Q: Is the Rds(on) value of IRFD9014PBF suitable as a substitute for IRFD9113?
A: Yes, IRFD9014PBF provides an Rds(on) of 500mOhm at 660mA, 10V, which is better than the 1.6 Ohm at 300mA, 10V specified for IRFD9113.

Q: What is the Mounting Type for both parts?
A: The mounting type is through-hole for both IRFD9113 and IRFD9014PBF.

Q: What is the status of IRFD9113 in production?
A: IRFD9113 is obsolete.