IRF7467PBF N-Channel MOSFET Equivalent & Substitute Parts

Part Overview

The IRF7467PBF is an N-Channel MOSFET manufactured by Infineon Technologies, rated for 30V drain-to-source voltage with 11A continuous drain current at 25°C. This device is part of the HEXFET® series and is designed for surface mount applications in 8-SO packaging. The IRF7467PBF is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. Substitute parts listed below maintain functional compatibility within specified electrical and mechanical parameters.

Substiute Parts

IRF7467PBF

Infineon TechnologiesIn Stock: 895IRF7467PBF Datasheet

Current PartRFQ

DMN3016LSS-13

Diodes IncorporatedIn Stock: 6860DMN3016LSS-13 Datasheet

MFR RecommendedRFQ

FDS4672A

onsemiIn Stock: 8002FDS4672A Datasheet

MFR RecommendedRFQ

FDS6690A

onsemiIn Stock: 40000FDS6690A Datasheet

MFR RecommendedRFQ

FDS8878

Fairchild SemiconductorIn Stock: 32909FDS8878 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IRF7467PBF is determined by the following critical parameters:

Primary Compatibility Criteria:

• FET Type: N-Channel (all substitutes must be N-Channel)
• Drain to Source Voltage (Vdss): 30V minimum (substitutes rated at 30V or higher are acceptable)
• Continuous Drain Current (Id): 11A or greater at 25°C
• Package / Case: 8-SOIC (0.154", 3.90mm Width) for direct PCB compatibility
• Mounting Type: Surface Mount

Secondary Compatibility Criteria:

• Rds On (Max): 12 mOhm or lower at rated conditions ensures equivalent or superior performance
• Power Dissipation: 2.5W or greater
• Operating Temperature Range: -55°C to 150°C minimum

The substitute parts listed below satisfy these criteria and are classified as active products with current manufacturing status, ensuring long-term availability and supply chain reliability.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: FDS6690A (onsemi)

The FDS6690A is the closest functional equivalent to the IRF7467PBF. It matches the 30V Vdss rating, provides 11A continuous drain current, and maintains 12.5 mOhm Rds On at rated conditions. The device is ROHS3 compliant and carries active product status, ensuring long-term availability. Operating temperature range extends to 150°C, matching the original specification. This part is recommended as the first choice for direct replacement in new designs and legacy system updates.

Secondary Substitute: FDS4672A (onsemi)

The FDS4672A offers higher voltage capability at 40V Vdss, providing additional design margin for applications subject to voltage transients. It maintains 11A continuous drain current and 2.5W power dissipation matching the original part. The extended operating temperature range to 175°C provides thermal headroom. This substitute is suitable for applications where higher voltage rating is beneficial or required. ROHS3 compliance and active status support procurement continuity.

Tertiary Substitute: DMN3016LSS-13 (Diodes Incorporated)

The DMN3016LSS-13 provides 30V Vdss and 10.3A continuous drain current with 12 mOhm Rds On at 12A, 10V. Power dissipation is rated at 1.5W, which is lower than the original specification. This part is suitable for applications with reduced thermal load or where lower power dissipation is advantageous. ROHS3 compliance and active product status ensure supply chain reliability. Tape & Reel packaging supports high-volume manufacturing environments.

Alternative Substitute: FDS8878 (Fairchild Semiconductor)

The FDS8878 maintains 30V Vdss and provides 10.2A continuous drain current with 14 mOhm Rds On at 10.2A, 10V. Power dissipation is rated at 2.5W, matching the original specification. This part carries active product status and supports legacy system maintenance. Operating temperature range is -55°C to 150°C, consistent with the original device.

All substitute parts are classified as active products with current manufacturing support, ensuring availability for both new designs and ongoing production requirements.

Frequently Asked Questions (FAQ)

Q: Can the FDS6690A be used as a direct replacement for the IRF7467PBF?

A: Yes. The FDS6690A is functionally compatible with the IRF7467PBF. Both devices share identical 30V Vdss rating, 11A continuous drain current, 12.5 mOhm Rds On at 10V, and 8-SOIC packaging. Operating temperature ranges are identical (-55°C to 150°C). No circuit modifications are required for direct substitution.

Q: What is the difference between the FDS4672A and FDS6690A?

A: The primary difference is Vdss rating. The FDS4672A is rated for 40V, while the FDS6690A is rated for 30V. Both provide 11A continuous drain current and 2.5W power dissipation. The FDS4672A offers higher voltage margin and extended operating temperature to 175°C. Select FDS4672A when higher voltage capability is required or beneficial for circuit protection.

Q: Why is the DMN3016LSS-13 rated for lower power dissipation (1.5W vs. 2.5W)?

A: The DMN3016LSS-13 is designed with different thermal characteristics and die architecture compared to the IRF7467PBF. The lower power dissipation rating reflects the device's thermal performance under specified conditions. This part is suitable for applications with reduced thermal load. Verify thermal requirements in your specific application before selection.

Q: Are all substitute parts ROHS3 compliant?

A: The FDS6690A, FDS4672A, and DMN3016LSS-13 are explicitly ROHS3 compliant. The FDS8878 compliance status is not specified in available documentation. Confirm ROHS3 compliance requirements with your procurement or quality assurance department before final part selection.

Q: Can these substitute parts be used in high-temperature applications?

A: The FDS4672A supports operating temperatures to 175°C, providing the highest thermal capability. The IRF7467PBF, FDS6690A, DMN3016LSS-13, and FDS8878 all support -55°C to 150°C. Select FDS4672A for applications requiring operation above 150°C.

Q: Is the 8-SOIC package identical across all substitute parts?

A: Yes. All substitute parts use 8-SOIC (0.154", 3.90mm Width) packaging, ensuring identical PCB footprint and pin compatibility. No layout modifications are required for direct substitution.

Q: What is the inventory status of these substitute parts?

A: All substitute parts carry active product status with substantial inventory availability: FDS6690A (39,900 pcs), FDS4672A (7,991 pcs), FDS8878 (32,800 pcs), and DMN3016LSS-13 (6,838 pcs). This ensures reliable procurement for both prototype and production quantities.