IRF2807STRRPBF N-Channel MOSFET Equivalent & Substitute Parts

Part Overview

The IRF2807STRRPBF is an N-Channel MOSFET manufactured by Infineon Technologies, rated for 75V drain-to-source voltage and 82A continuous drain current in a D2PAK surface mount package. This device is classified as obsolete product status. Due to obsolescence, equivalent substitute parts with active product status are necessary to maintain design continuity and ensure long-term supply chain reliability. Substitute parts must maintain electrical compatibility within the specified parameter ranges while offering active manufacturing status and improved availability.

Key Parameters

Parameter	IRF2807STRRPBF Value	Unit
FET Type	N-Channel	—
Drain-to-Source Voltage (Vdss)	75	V
Continuous Drain Current (Id) @ 25°C	82	A (Tc)
On-State Resistance (Rds On) @ 43A, 10V	13	mOhm
Gate Threshold Voltage (Vgs(th)) @ 250µA	4	V
Gate Charge (Qg) @ 10V	160	nC
Power Dissipation (Max)	230	W (Tc)
Operating Temperature Range	-55 to 175	°C (TJ)
Package Type	D2PAK (TO-263-3)	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitute parts for the IRF2807STRRPBF are selected based on strict electrical and mechanical compatibility criteria. The primary substitution parameters are:

Critical Compatibility Parameters:

Drain-to-Source Voltage (Vdss): Must equal or exceed 75V
Continuous Drain Current (Id): Must equal or exceed 82A at 25°C
Package Type: Must be D2PAK (TO-263-3) surface mount
Operating Temperature Range: Must span -55°C to 175°C minimum
Gate Drive Voltage: Compatible with 10V drive specification

Secondary Compatibility Parameters:

On-State Resistance (Rds On): Lower values indicate improved performance
Gate Charge (Qg): Lower values reduce switching losses
Power Dissipation: Must support thermal requirements of application

Substitute parts are grouped into three categories based on voltage and current ratings:

Category A - Direct Voltage Match (75V): Parts maintaining 75V Vdss rating with equal or higher current capacity.

Category B - Elevated Voltage (80-100V): Parts with higher Vdss ratings suitable for applications with voltage margin requirements.

Category C - Reduced Current (50-67A): Parts with lower current ratings for applications not requiring full 82A capacity.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Qg (nC)	Pd Max (W)	Package	Status
IRF2807STRRPBF	Infineon	75	82	13 @ 43A, 10V	160 @ 10V	230	D2PAK	Obsolete
IRF2807STRLPBF	Infineon	75	82	13 @ 43A, 10V	160 @ 10V	230	D2PAK	Active
IRFS4410ZTRLPBF	Infineon	100	97	9 @ 58A, 10V	120 @ 10V	230	D2PAK	Active
STB140NF75T4	STMicroelectronics	75	120	7.5 @ 70A, 10V	218 @ 10V	310	D2PAK	Active
HUF75545S3ST	onsemi	80	75	10 @ 75A, 10V	235 @ 20V	270	D2PAK	Active
PSMN012-80BS,118	Nexperia	80	74	11 @ 15A, 10V	43 @ 10V	148	D2PAK	Active
PSMN017-80BS,118	Nexperia	80	50	17 @ 10A, 10V	26 @ 10V	103	D2PAK	Active
BUK9616-75B,118	Nexperia	75	67	14 @ 25A, 10V	35 @ 5V	157	D2PAK	Active
STB60NF06T4	STMicroelectronics	60	60	16 @ 30A, 10V	66 @ 10V	110	D2PAK	Active
FDB13AN06A0	onsemi	60	62	13.5 @ 62A, 10V	29 @ 10V	115	D2PAK	Active
IPB50N10S3L16ATMA1	Infineon	100	50	15.4 @ 50A, 10V	64 @ 10V	100	D2PAK	Active

Engineering Selection Recommendations

Primary Recommendation: IRF2807STRLPBF

The IRF2807STRLPBF is the direct active-status equivalent of the obsolete IRF2807STRRPBF. This part maintains identical electrical specifications (75V, 82A, 13mOhm Rds On, 160nC gate charge) and D2PAK packaging. The only difference is packaging format (Tape & Reel versus Cut Tape). This part is ROHS3 compliant and carries active product status with 23,954 units in stock. This is the preferred substitution for direct replacement without circuit redesign.

Secondary Recommendation for Elevated Voltage Applications: IRFS4410ZTRLPBF

The IRFS4410ZTRLPBF offers 100V Vdss rating with 97A continuous drain current, providing voltage margin for applications subject to transient overvoltage. This part features improved on-state resistance (9mOhm versus 13mOhm) and reduced gate charge (120nC versus 160nC), resulting in lower switching losses. Suitable for designs where voltage headroom is required. ROHS3 compliant, active status, 30,297 units in stock.

Secondary Recommendation for High Current Applications: STB140NF75T4

The STB140NF75T4 maintains the 75V rating while providing 120A continuous drain current, exceeding the original 82A specification. This part offers superior on-state resistance (7.5mOhm) and higher power dissipation capability (310W). Suitable for applications requiring current margin or thermal performance improvement. STripFET™ III series, ROHS3 compliant, active status, 2,749 units in stock.

Alternative for 80V Applications: HUF75545S3ST

The HUF75545S3ST provides 80V Vdss with 75A continuous drain current, maintaining near-equivalent current capacity. Features 10mOhm on-state resistance and 270W power dissipation. UltraFET™ series from onsemi, ROHS3 compliant, active status, 4,600 units in stock.

Alternative for 80V Applications: PSMN012-80BS,118

The PSMN012-80BS,118 provides 80V Vdss with 74A continuous drain current, closely matching original specifications. Features 11mOhm on-state resistance and significantly reduced gate charge (43nC). Nexperia TrenchMOS™ technology, ROHS3 compliant, active status, 5,993 units in stock.

Not Recommended: PSMN017-80BS,118, STB60NF06T4, FDB13AN06A0, IPB50N10S3L16ATMA1

These parts do not meet the minimum 82A continuous drain current requirement of the original device. PSMN017-80BS,118 provides only 50A, STB60NF06T4 provides 60A, FDB13AN06A0 provides 62A, and IPB50N10S3L16ATMA1 provides 50A. These parts are suitable only for applications with reduced current requirements.

Not Recommended: BUK9616-75B,118

This part provides only 67A continuous drain current, below the 82A specification. Although it maintains 75V rating, the current deficit makes it unsuitable for direct replacement in designs requiring full 82A capacity.

Frequently Asked Questions (FAQ)

Q1: Can I use IRF2807STRLPBF as a direct replacement for IRF2807STRRPBF?

Yes. The IRF2807STRLPBF is the active-status equivalent with identical electrical specifications. The difference is packaging format: STRLPBF uses Tape & Reel packaging while STRRPBF uses Cut Tape packaging. Both are D2PAK surface mount packages with identical pin configuration and electrical performance. No circuit modifications are required.

Q2: What is the difference between the substitute parts in terms of voltage ratings?

Substitute parts are available in three voltage classes: 60V (STB60NF06T4, FDB13AN06A0), 75V (IRF2807STRLPBF, STB140NF75T4, BUK9616-75B,118), and 80-100V (HUF75545S3ST, PSMN012-80BS,118, PSMN017-80BS,118, IRFS4410ZTRLPBF, IPB50N10S3L16ATMA1). Higher voltage ratings provide transient overvoltage protection but may increase on-state resistance. Select voltage rating based on application maximum voltage requirements.

Q3: Which substitute part has the lowest on-state resistance?

The STB140NF75T4 features the lowest on-state resistance at 7.5mOhm (measured at 70A, 10V gate voltage). The IRFS4410ZTRLPBF provides 9mOhm. Lower on-state resistance reduces conduction losses and heat generation. Select based on thermal management requirements and power budget.

Q4: Can I use a 100V rated part in place of the 75V original?

Yes, provided all other electrical parameters meet or exceed requirements. The IRFS4410ZTRLPBF (100V, 97A) and IPB50N10S3L16ATMA1 (100V, 50A) are electrically compatible. Higher voltage ratings do not degrade performance in 75V applications; they provide additional voltage margin for transient protection. However, verify that gate drive circuitry is compatible with the substitute part's gate charge and threshold voltage specifications.

Q5: What is the significance of gate charge (Qg) differences between parts?

Gate charge determines the energy required to switch the MOSFET on and off. Lower gate charge (26-66nC) reduces switching losses and allows faster switching speeds compared to higher gate charge (160-235nC). Parts with lower gate charge may require different gate drive circuit design. Verify gate drive circuit compatibility before substitution.

Q6: Are all substitute parts RoHS3 compliant?

Yes. All substitute parts listed are RoHS3 compliant and REACH unaffected. All parts carry ECCN EAR99 classification and HTSUS code 8541.29.0095. All parts have Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity precautions are required during storage or handling.

Q7: Which substitute part offers the highest current capacity?

The STB140NF75T4 provides the highest continuous drain current at 120A (measured at 25°C case temperature). This exceeds the original 82A specification by 46%. Select this part for applications requiring current margin or where load current may increase in future design revisions.

Q8: Can I use parts with lower current ratings (50-67A) as substitutes?

No, not for direct replacement. Parts with current ratings below 82A (PSMN017-80BS,118 at 50A, BUK9616-75B,118 at 67A, STB60NF06T4 at 60A, FDB13AN06A0 at 62A, IPB50N10S3L16ATMA1 at 50A) are unsuitable for applications requiring the full 82A capacity. These parts are only acceptable for applications with reduced current requirements or where the original design was over-specified.

Q9: What is the difference between D2PAK and TO-263-3 package designations?

D2PAK and TO-263-3 are equivalent package designations for the same physical package. Both refer to a 3-lead surface mount package with 2 leads plus a tab. All substitute parts use this identical package, ensuring mechanical compatibility and identical PCB footprints. No layout modifications are required.

Q10: Which substitute part is recommended for automotive applications?

The BUK9616-75B,118 is qualified to AEC-Q101 automotive standard and carries automotive grade designation. This part is suitable for automotive applications requiring automotive-qualified components. Other parts are not specified with automotive qualification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message