IRAMX16UP60A Equivalent & Substitute Parts

Part Overview

The IRAMX16UP60A is a Power Driver Module IGBT manufactured by Infineon Technologies, designed for 3-phase applications with 600V voltage rating and 16A current capacity. This component is classified as Obsolete, making identification of suitable equivalent parts essential for system maintenance, repair, and legacy design support. The module features a 23-PowerSIP package with 19 formed leads and through-hole mounting configuration, standard for industrial power conversion applications.

Substiute Parts

IRAMX16UP60A

Infineon TechnologiesIn Stock: 2086IRAMX16UP60A Datasheet

Current PartRFQ

STK541UC62K-E

onsemiIn Stock: 1454STK541UC62K-E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IRAMX16UP60A is determined by the following critical parameters that must align for functional compatibility:

Mandatory Matching Parameters:

• Configuration: 3 Phase
• Voltage Rating: 600 V
• Voltage - Isolation: 2000 Vrms
• Package / Case: 23-PowerSIP Module, 19 Leads, Formed Leads
• Mounting Type: Through Hole
• Type: IGBT

Allowable Variation:

• Current Rating: The substitute part may operate at a lower current capacity (10A vs. 16A) provided the application does not exceed the substitute's rated current. This represents a derating scenario suitable for legacy system support.

The STK541UC62K-E from onsemi meets all mandatory parameters while operating at 10A current capacity, making it a valid substitute for applications not requiring the full 16A capability of the original component.

Parameter Comparison

Engineering Selection Recommendations

The STK541UC62K-E serves as a functional equivalent for the obsolete IRAMX16UP60A in applications where current requirements do not exceed 10A. Both components share identical voltage ratings, isolation specifications, package geometry, and mounting configuration, ensuring direct mechanical and electrical compatibility at the board level.

The STK541UC62K-E carries "Not For New Designs" status, indicating it remains available for legacy system support and replacement applications. Both parts maintain REACH Unaffected compliance and EAR99 export classification, supporting continued use in existing installations.

Current derating from 16A to 10A must be evaluated against actual application load profiles. Systems designed for the full 16A capability of the IRAMX16UP60A require thermal and electrical analysis to confirm operation within the STK541UC62K-E's 10A limit.

Frequently Asked Questions (FAQ)

Q: Can the STK541UC62K-E directly replace the IRAMX16UP60A in existing designs?

A: Yes, for mechanical and electrical interface compatibility. The 23-PowerSIP package, pin configuration, voltage rating, and isolation specification are identical. However, the reduced current rating (10A vs. 16A) must be verified against application requirements.

Q: What is the impact of the 6A current reduction?

A: The STK541UC62K-E is rated for 10A maximum continuous current. Applications operating the IRAMX16UP60A at currents exceeding 10A cannot use this substitute without redesign or derating. Thermal management and load analysis are required to confirm safe operation.

Q: Are there packaging or lead compatibility concerns?

A: No. Both components use the 23-PowerSIP Module package with 19 formed leads and through-hole mounting. PCB footprints and assembly processes remain unchanged.

Q: What compliance certifications apply to both parts?

A: Both the IRAMX16UP60A and STK541UC62K-E are REACH Unaffected and classified as EAR99 for export purposes. The STK541UC62K-E is RoHS3 Compliant.

Q: Why is the IRAMX16UP60A listed as Obsolete?

A: Obsolete status indicates the part is no longer manufactured by Infineon. The STK541UC62K-E, while marked "Not For New Designs," remains available through authorized distributors for legacy system support and replacement applications.