IR25607SPBF Equivalent & Substitute Parts

Part Overview

The IR25607SPBF is a half-bridge gate driver IC manufactured by Infineon Technologies, designed for driving IGBT and N-Channel MOSFET configurations in power management applications. This device operates with a supply voltage range of 10V to 20V and provides independent dual-channel gate driving with peak output currents of 2.5A for both source and sink operations.

The IR25607SPBF is classified as obsolete product status. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for applications utilizing this half-bridge gate driver topology.

Substiute Parts

IR25607SPBF

Infineon TechnologiesIn Stock: 1605IR25607SPBF Datasheet

Current PartRFQ

IR25607STRPBF

Infineon TechnologiesIn Stock: 6451IR25607STRPBF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IR25607SPBF is determined by strict equivalence across the following critical parameters:

Driven configuration must remain half-bridge with independent dual-channel architecture. The gate type must support both IGBT and N-Channel MOSFET switching applications. Supply voltage range, logic voltage thresholds (VIL and VIH), and peak output current specifications (source and sink) must be identical or exceed the original part requirements. Input type must remain non-inverting. Bootstrap voltage rating and thermal operating range must match or exceed original specifications. Package type must be 16-SOIC with identical physical dimensions to ensure PCB compatibility without layout modifications. RoHS3 compliance and MSL rating must be maintained for manufacturing and environmental requirements.

The IR25607STRPBF meets all substitution criteria as a direct equivalent, differing only in packaging format (Cut Tape & Digi-Reel versus Tube) and product status (Active versus Obsolete).

Parameter Comparison

Engineering Selection Recommendations

The IR25607STRPBF is the direct substitute for the IR25607SPBF. Both parts are manufactured by Infineon Technologies and share identical electrical and mechanical specifications. The primary distinction is product status: the IR25607SPBF is obsolete while the IR25607STRPBF maintains active status with current manufacturing support.

Selection of the IR25607STRPBF is supported by its active product status, ensuring ongoing availability and manufacturing continuity. Both parts maintain ROHS3 compliance and identical MSL ratings, satisfying environmental and manufacturing requirements. The packaging format difference (Cut Tape & Digi-Reel versus Tube) does not affect electrical performance or PCB integration, only supply chain logistics and handling procedures.

Frequently Asked Questions (FAQ)

Q: Can IR25607STRPBF replace IR25607SPBF in existing designs?

A: Yes. The IR25607STRPBF is electrically and mechanically identical to the IR25607SPBF. All electrical parameters, package dimensions, and thermal specifications are equivalent. No circuit modifications or PCB layout changes are required.

Q: What is the difference between Tube and Cut Tape packaging?

A: Tube packaging supplies components in plastic tubes for manual handling and smaller quantity orders. Cut Tape & Digi-Reel packaging supplies components on continuous tape for automated pick-and-place assembly equipment. Both formats contain identical components with no electrical differences.

Q: Are there any compliance or certification differences?

A: No. Both IR25607SPBF and IR25607STRPBF maintain ROHS3 compliance, identical MSL ratings (3, 168 Hours), and equivalent REACH and ECCN classifications.

Q: Why is the IR25607SPBF listed as obsolete?

A: Obsolete status indicates the manufacturer has discontinued production of this specific part number. The IR25607STRPBF remains in active production as the current equivalent offering.

Q: Are the 16-SOIC packages physically identical?

A: Yes. Both parts use 16-SOIC packages with identical dimensions (0.295", 7.50mm Width). PCB footprints and component placement are interchangeable without modification.

Q: What are the critical parameters for half-bridge gate driver substitution?

A: Supply voltage range, logic voltage thresholds, peak output current (source and sink), bootstrap voltage rating, input type (non-inverting), package type, and operating temperature range must all match or exceed original specifications. Gate type compatibility with IGBT and N-Channel MOSFET applications is mandatory.