IR2214SS Equivalent & Substitute Parts

Part Overview

The IR2214SS is a half-bridge gate driver IC manufactured by Infineon Technologies, designed for driving IGBT power switches in half-bridge configurations. This device operates with independent channels and provides non-inverting logic inputs, making it suitable for power conversion applications requiring precise gate drive control.

The IR2214SS is classified as obsolete, which necessitates identification of active equivalent parts for new designs and ongoing production requirements. Active substitute parts maintain identical electrical and mechanical specifications while offering current product status and improved compliance certifications.

Substiute Parts

IR2214SS

Infineon TechnologiesIn Stock: 1408IR2214SS Datasheet

Current PartRFQ

IR2214SSPBF

Infineon TechnologiesIn Stock: 1238IR2214SSPBF Datasheet

DirectRFQ

IR2214SSTRPBF

Infineon TechnologiesIn Stock: 39818IR2214SSTRPBF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IR2214SS is based on strict equivalence across all electrical and mechanical parameters. The substitute parts IR2214SSPBF and IR2214SSTRPBF share the identical base product number (IR2214) and maintain 100% compatibility with the original specification across the following critical parameters:

• Half-bridge driven configuration with independent dual channels
• IGBT gate drive capability
• Supply voltage range: 11.5V ~ 20V
• Logic input thresholds: VIL 0.8V, VIH 2V
• Peak output current: 2A source, 3A sink
• Bootstrap voltage rating: 1200V maximum
• Switching characteristics: 24ns rise time, 7ns fall time
• Operating temperature range: -40°C ~ 150°C
• Package specification: 24-SSOP surface mount

The substitute parts differ only in packaging format and product status, not in electrical performance or functional capability.

Parameter Comparison

Engineering Selection Recommendations

Both IR2214SSPBF and IR2214SSTRPBF are direct functional equivalents to the obsolete IR2214SS, with identical electrical specifications and 24-SSOP package compatibility. Selection between these two active alternatives is determined by packaging and supply requirements:

IR2214SSPBF is supplied in tube packaging format, suitable for applications requiring standard component handling and storage procedures.

IR2214SSTRPBF is supplied in cut tape and Digi-Reel format, optimized for high-volume automated assembly operations and continuous production environments. This variant offers significantly higher inventory availability (39,713 pieces) compared to the tube-packaged alternative.

Both substitute parts carry ROHS3 compliance certification, representing an improvement over the non-compliant status of the original IR2214SS. The moisture sensitivity level increases from MSL 1 to MSL 3, requiring adherence to 168-hour storage and handling protocols during manufacturing.

Frequently Asked Questions (FAQ)

Q: Can IR2214SSPBF and IR2214SSTRPBF be used interchangeably with IR2214SS?

A: Yes. Both substitute parts maintain identical electrical specifications, gate drive characteristics, and 24-SSOP package dimensions. The differences are limited to packaging format and product compliance status.

Q: What is the primary reason for substituting the IR2214SS?

A: The IR2214SS is classified as obsolete. IR2214SSPBF and IR2214SSTRPBF are active products from the same manufacturer with identical functional specifications, ensuring continued availability for new designs and production continuity.

Q: Are there differences in RoHS compliance between these parts?

A: Yes. The IR2214SS is RoHS non-compliant, while both IR2214SSPBF and IR2214SSTRPBF are ROHS3 compliant. This represents an environmental and regulatory improvement for new applications.

Q: How do the moisture sensitivity levels differ?

A: The IR2214SS has MSL 1 (unlimited storage), while the substitute parts have MSL 3 (168-hour maximum storage at specified humidity). Manufacturing processes must account for this 168-hour handling window during component storage and assembly.

Q: Which substitute part should be selected for high-volume production?

A: IR2214SSTRPBF is recommended for high-volume automated assembly due to cut tape and Digi-Reel packaging compatibility and superior inventory availability (39,713 pieces versus 1,215 pieces for the tube-packaged variant).

Q: Are the switching characteristics identical across all three parts?

A: Yes. Rise time (24ns typical) and fall time (7ns typical) are identical, ensuring equivalent gate drive performance in half-bridge IGBT applications.

Q: What is the bootstrap voltage rating for these gate drivers?

A: All three parts support a maximum bootstrap voltage of 1200V, suitable for high-voltage half-bridge power conversion topologies.