IR2183 Half-Bridge Gate Driver IC - Equivalent & Substitute Parts

Part Overview

The IR2183 is a half-bridge gate driver IC manufactured by Infineon Technologies, designed to drive IGBT and N-Channel MOSFET configurations in power management applications. This device features independent dual-channel architecture with inverting and non-inverting input types, supporting bootstrap voltage up to 600V. The IR2183 is classified as obsolete, making identification of functionally equivalent substitute parts essential for ongoing system support and new design implementations.

Substiute Parts

IR2183

Infineon TechnologiesIn Stock: 2215IR2183 Datasheet

Current PartRFQ

IR2183PBF

Infineon TechnologiesIn Stock: 2742IR2183PBF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IR2183 is determined by strict equivalence across the following critical parameters:

• Driven configuration (Half-Bridge)
• Channel type (Independent dual-channel)
• Gate type compatibility (IGBT, N-Channel MOSFET)
• Supply voltage range (10V ~ 20V)
• Logic voltage thresholds (VIL 0.8V, VIH 2.7V)
• Peak output current specifications (Source 1.9A, Sink 2.3A)
• Bootstrap voltage rating (600V maximum)
• Switching characteristics (Rise/Fall time 40ns/20ns)
• Package form factor (8-DIP through-hole)
• Operating temperature range (-40°C ~ 150°C)

The IR2183PBF qualifies as a direct substitute based on identical electrical and mechanical specifications across all parameters listed above.

Parameter Comparison

Engineering Selection Recommendations

The IR2183PBF is a direct functional equivalent to the IR2183, with identical electrical performance and package specifications. The primary distinction is regulatory compliance: IR2183PBF carries ROHS3 certification, whereas the original IR2183 is RoHS non-compliant. Both parts maintain REACH Unaffected status and identical moisture sensitivity ratings.

For applications requiring RoHS3 compliance or new procurement, IR2183PBF is the appropriate selection. For legacy system maintenance where RoHS compliance is not mandated, either part satisfies the functional requirements. Both parts are classified as obsolete; availability should be verified through authorized distributors prior to design commitment.

Frequently Asked Questions (FAQ)

Q: Can IR2183PBF replace IR2183 in existing designs?

A: Yes. IR2183PBF is electrically and mechanically identical to IR2183 across all specified parameters. Pin configuration, voltage ratings, current capabilities, and switching characteristics are equivalent. Direct substitution is supported without circuit modification.

Q: What is the difference between IR2183 and IR2183PBF?

A: The primary difference is RoHS compliance status. IR2183PBF is ROHS3 compliant, while IR2183 is RoHS non-compliant. All electrical and mechanical specifications are identical.

Q: Are there any package or pinout differences?

A: No. Both parts use identical 8-DIP through-hole packaging with 0.300" (7.62mm) spacing. Pinout and PCB footprint compatibility is complete.

Q: What supply voltage range does this gate driver support?

A: The IR2183 and IR2183PBF operate with supply voltage between 10V and 20V. Bootstrap voltage capability extends to 600V maximum.

Q: What is the output current capability?

A: Peak output current is 1.9A (source) and 2.3A (sink), supporting typical IGBT and N-Channel MOSFET gate drive requirements in half-bridge configurations.

Q: Are these parts still in production?

A: Both IR2183 and IR2183PBF are classified as obsolete. Availability is limited to existing inventory from authorized distributors. Verify stock status before committing to new designs.