IR2136 Half-Bridge Gate Driver IC - Equivalent & Substitute Parts

Part Overview

The IR2136 is a half-bridge gate driver IC manufactured by Infineon Technologies, designed for driving IGBT and N-Channel MOSFET configurations in 3-phase applications. This component operates with a supply voltage range of 10V to 20V and provides peak output currents of 200mA (source) and 350mA (sink), with a maximum bootstrap voltage rating of 600V. The IR2136 is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Substiute Parts

IR2136

Infineon TechnologiesIn Stock: 4655IR2136 Datasheet

Current PartRFQ

IR2136PBF

Infineon TechnologiesIn Stock: 2421IR2136PBF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IR2136 is determined by strict equivalence across the following critical parameters:

• Driven Configuration: Half-Bridge topology
• Channel Type: 3-Phase operation
• Number of Drivers: 6 drivers
• Gate Type: IGBT and N-Channel MOSFET compatibility
• Voltage - Supply: 10V ~ 20V range
• Current - Peak Output: 200mA source, 350mA sink
• Input Type: Inverting configuration
• High Side Voltage - Max (Bootstrap): 600V rating
• Package / Case: 28-DIP form factor
• Mounting Type: Through Hole

The IR2136PBF is identified as a direct substitute, maintaining identical electrical specifications and mechanical packaging while offering improved compliance status.

Parameter Comparison

Engineering Selection Recommendations

The IR2136PBF serves as the direct functional equivalent to the IR2136, with identical electrical and mechanical specifications across all critical parameters. The primary distinction is regulatory compliance: IR2136PBF achieves ROHS3 compliance, whereas the original IR2136 is RoHS non-compliant. Both components maintain REACH Unaffected status and share identical ECCN (EAR99) and HTSUS (8542.39.0001) classifications.

For applications requiring RoHS compliance or new procurement, IR2136PBF is the appropriate selection. For legacy system maintenance where RoHS compliance is not mandated, either part number is electrically and mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: What makes IR2136PBF a valid substitute for IR2136?

A: IR2136PBF maintains identical electrical specifications (supply voltage, output current, bootstrap voltage, timing characteristics) and mechanical packaging (28-DIP through-hole). Both components are half-bridge gate drivers with 6 drivers for 3-phase IGBT and N-Channel MOSFET applications.

Q: Are there any physical differences between IR2136 and IR2136PBF?

A: No. Both components use the same 28-DIP (0.600", 15.24mm) package with through-hole mounting. Pin configuration and footprint are identical.

Q: What is the significance of the RoHS compliance difference?

A: IR2136PBF is ROHS3 compliant, while IR2136 is RoHS non-compliant. This affects procurement eligibility for applications or regions with RoHS requirements. Electrical and functional performance are unaffected by this distinction.

Q: Can IR2136 be replaced with IR2136PBF in existing designs?

A: Yes. IR2136PBF is a direct substitute with no design modifications required. The components are pin-compatible and functionally equivalent across all operating parameters.

Q: Are there any other substitute part numbers listed?

A: IR2136STRPBF is identified as an additional substitute option, maintaining the same electrical and mechanical specifications as IR2136 and IR2136PBF.