IPSLU-AP015-5 Equivalent & Substitute Parts Reference

Part Overview

The Sensata-Cynergy3 IPSLU-AP015-5 is an industrial automation pressure transmitter with an absolute pressure range of 0–15PSI, providing a 4–20 mA analog current output. This part is designated as obsolete, necessitating the identification of direct alternative models for ongoing manufacturing, repair, or design requirements.

Substiute Parts

IPSLU-AP015-5

Sensata-Cynergy3In Stock: 1023IPSLU-AP015-5 Datasheet

Current PartRFQ

US381-000005-015PA

TE Connectivity Measurement SpecialtiesIn Stock: 905US381-000005-015PA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are selected by strictly matching the following key parameters: absolute pressure type, identical operating pressure (15PSI), output type (4–20 mA analog current), supply voltage overlap, port size and style (Male 1/4" NPT threaded), case design (cylinder), compliance with RoHS, and MSL 1 rating. Only parts with explicit data matching these criteria are included as valid alternatives.

Parameter Comparison

Engineering Selection Recommendations

The IPSLU-AP015-5 part is obsolete and is documented as ROHS3 compliant, MSL 1 (Unlimited), and REACH Unaffected. The US381-000005-015PA is active, ROHS3 compliant, MSL 1 (Unlimited), and REACH Affected. Both parts share identical compliance status for RoHS and MSL, with differentiation in REACH status. Substitute selection based on compliance should consider documented ROHS3 and MSL 1 equivalency, and review REACH status as required for application-specific directives.

Frequently Asked Questions (FAQ)

Q1: What are the primary criteria for selecting an equivalent pressure transmitter for IPSLU-AP015-5?
A1: Main criteria include pressure type (absolute), operating pressure (15PSI), output type and range (4–20 mA analog current), overlapping supply voltage, port size and style (Male 1/4" NPT threaded), package/case type (cylinder), RoHS and MSL compliance.

Q2: Are termination styles interchangeable in this category?
A2: The main part uses a connector termination, while the substitute uses a cable termination. Selection must be based on compatibility with system wiring and installation requirements.

Q3: Can both parts be used in the same physical mounting locations?
A3: Both parts utilize the cylinder package and Male 1/4" (6.35mm) NPT threaded ports, supporting mechanical interchangeability.

Q4: How does REACH status affect substitute selection?
A4: REACH Status should be verified according to the end-use application. The main part is REACH Unaffected; the substitute is REACH Affected. Select as appropriate for required regulatory compliance.

Q5: Are there any functional differences in output or accuracy?
A5: The substitute part has higher accuracy (±0.25%) compared to the main part (±0.5%), and both parts provide identical 4–20 mA output current signaling.