IPS1-107-01-SM-D Equivalent & Substitute Parts

Part Overview

The IPS1-107-01-SM-D is a 14-position receptacle connector from Samtec Inc.'s Mini Mate® IPS1 series, designed for board-to-board applications with 0.100" (2.54mm) pitch spacing. This through-hole mounted connector features gold-plated mating contacts and tin-plated posts, operating across -55°C to 125°C with push-pull fastening. The part is Active status and ROHS3 compliant. Equivalent parts are identified when all critical electrical and mechanical parameters align, enabling direct substitution in applications requiring identical connector specifications.

Substiute Parts

IPS1-107-01-SM-D

Samtec Inc.In Stock: 892IPS1-107-01-SM-D Datasheet

Current PartRFQ

IPS1-107-01-L-D

Samtec Inc.In Stock: 956IPS1-107-01-L-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IPS1-107-01-SM-D is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Position count (14 positions)
• Pitch spacing (0.100" mating pitch, 0.100" row spacing)
• Row configuration (2 rows)
• Mounting method (Through Hole)
• Termination type (Solder)
• Fastening mechanism (Push-Pull)
• Contact material and finish (Phosphor Bronze with Gold mating, Tin post)
• Insulation material (Liquid Crystal Polymer)
• Voltage and temperature ratings (775VAC/1095VDC, -55°C to 125°C)

The IPS1-107-01-L-D meets all these criteria and is classified as a direct equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both IPS1-107-01-SM-D and IPS1-107-01-L-D are Active status products with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and lead time requirements. The IPS1-107-01-SM-D currently has 834 pieces in stock, while the IPS1-107-01-L-D has 903 pieces available. Both parts meet the same regulatory requirements (EAR99 export classification, HTSUS code 8536.69.4040) and are suitable for direct substitution in board-to-board connector applications requiring 14-position, 0.100" pitch rectangular connectors with push-pull fastening.

Frequently Asked Questions (FAQ)

Q: Can IPS1-107-01-L-D replace IPS1-107-01-SM-D in existing designs?

A: Yes. Both parts share identical connector type, position count, pitch spacing, row configuration, mounting method, termination type, fastening mechanism, contact materials and finishes, insulation material, and voltage/temperature ratings. Direct substitution is supported.

Q: What is the difference between the SM and L designations in these part numbers?

A: The provided data does not specify the functional or dimensional differences between the SM and L designations. Both parts meet identical electrical and mechanical parameters for substitution purposes.

Q: Are there any compliance or certification differences between these parts?

A: Both parts are ROHS3 compliant, carry EAR99 export classification, and share the same HTSUS code. Compliance profiles are equivalent.

Q: What is the contact finish thickness specification for the mating surface?

A: The IPS1-107-01-SM-D does not specify contact finish thickness for the mating surface. The IPS1-107-01-L-D specifies 10.0µin (0.25µm) gold plating on mating contacts.

Q: Are these connectors suitable for high-temperature applications?

A: Both connectors operate across -55°C to 125°C, supporting applications within this temperature range with 775VAC and 1095VDC voltage ratings.