IPL1-106-02-L-D-G Equivalent & Substitute Parts

Part Overview

The IPL1-106-02-L-D-G is a surface mount rectangular connector header manufactured by Samtec Inc. as part of the Mini Mate® IPL1 series. This connector is an active product designed for board-to-cable/wire applications with 12 positions arranged in 2 rows at 0.100" (2.54mm) pitch. The part is currently in stock with 854 units available. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector interface, allowing for interchangeability in applications where the primary part may be unavailable or when inventory optimization is required.

Substiute Parts

IPL1-106-02-L-D-G

Samtec Inc.In Stock: 960IPL1-106-02-L-D-G Datasheet

Current PartRFQ

IPL1-106-02-L-D-K

Samtec Inc.In Stock: 1387IPL1-106-02-L-D-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The IPL1-106-02-L-D-K is classified as a direct substitute for the IPL1-106-02-L-D-G based on the following critical parameters that determine interchangeability:

• Connector Series & Type: Both parts belong to the Mini Mate® IPL1 series with identical header connector classification
• Contact Configuration: 12 positions in 2 rows with 0.100" (2.54mm) pitch and row spacing
• Electrical Ratings: Identical voltage ratings of 675VAC and 954VDC
• Mechanical Interface: Matching shrouding (4 wall), mounting type (surface mount), and termination method (solder)
• Environmental Specifications: Identical operating temperature range of -55°C ~ 125°C
• Compliance: Both parts maintain ROHS3 compliance and UL94 V-0 flammability rating

The substitution is based solely on the equivalence of these specified parameters. The parts differ only in contact finish designation (suffix -D-G versus -D-K), which represents a variation within the same product family that maintains full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both IPL1-106-02-L-D-G and IPL1-106-02-L-D-K are active products with full ROHS3 compliance and UL94 V-0 flammability certification. The parts maintain identical electrical specifications, mechanical dimensions, and environmental operating parameters. Selection between these parts should be based on inventory availability and supply chain requirements, as both parts satisfy equivalent functional and compliance criteria for board-to-cable/wire connector applications in the Mini Mate® IPL1 series.

Frequently Asked Questions (FAQ)

Q: Are IPL1-106-02-L-D-G and IPL1-106-02-L-D-K mechanically interchangeable?

A: Yes. Both parts share identical mechanical specifications including 12-position configuration, 2-row arrangement, 0.100" (2.54mm) pitch, shrouded 4-wall design, and surface mount termination. The parts are mechanically interchangeable in all board-to-cable/wire applications.

Q: Are these parts electrically equivalent?

A: Yes. Both parts maintain identical electrical ratings of 675VAC and 954VDC, operate across the same temperature range of -55°C ~ 125°C, and use identical contact materials (phosphor bronze) and finishes (gold mating, tin post).

Q: What is the difference between the -D-G and -D-K designations?

A: The suffix designations represent variations within the Mini Mate® IPL1 series. Both parts maintain full compatibility across all specified electrical and mechanical parameters.

Q: Are both parts RoHS compliant?

A: Yes. Both IPL1-106-02-L-D-G and IPL1-106-02-L-D-K are ROHS3 compliant with UL94 V-0 flammability rating.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1, indicating unlimited shelf life without moisture control requirements.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. The electrical and mechanical equivalence of these parts allows for direct substitution in applications designed for either part number within the Mini Mate® IPL1 series.