IPL1-105-01-L-S-RE1-K Equivalent & Substitute Parts

Part Overview

The IPL1-105-01-L-S-RE1-K is a rectangular connector header manufactured by Samtec Inc. within the Mini Mate® IPL1 series. This through-hole, right-angle connector accommodates 5 positions at 0.100" (2.54mm) pitch and is designed for board-to-cable/wire applications. The part is currently active in production with 792 units in stock. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and support component availability across manufacturing cycles.

Substiute Parts

IPL1-105-01-L-S-RE1-K

Samtec Inc.In Stock: 807IPL1-105-01-L-S-RE1-K Datasheet

Current PartRFQ

IPL1-105-01-L-S-RA-K

Samtec Inc.In Stock: 1291IPL1-105-01-L-S-RA-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IPL1-105-01-L-S-RE1-K is determined by strict equivalence across the following critical parameters:

• Manufacturer and series consistency (Samtec Inc., Mini Mate® IPL1)
• Connector type and contact configuration (Header, Male Pin)
• Mating pitch and position count (0.100" / 2.54mm, 5 positions, single row)
• Mounting orientation and termination method (Through Hole, Right Angle, Solder)
• Electrical and environmental ratings (675VAC / 954VDC, -55°C to 125°C, UL94 V-0)
• Compliance certifications (ROHS3 Compliant, MSL 1)

The substitute part IPL1-105-01-L-S-RA-K meets all these criteria and is therefore a direct equivalent within the Mini Mate® IPL1 series.

Parameter Comparison

Engineering Selection Recommendations

Both the IPL1-105-01-L-S-RE1-K and IPL1-105-01-L-S-RA-K are active production parts with identical electrical, mechanical, and environmental specifications. Both maintain ROHS3 compliance and UL94 V-0 flammability certification. The IPL1-105-01-L-S-RA-K currently has higher inventory availability (1204 units versus 792 units), which may support supply chain planning objectives. Selection between these parts should be based on procurement lead time requirements and inventory allocation strategy, as both parts are functionally and electrically equivalent.

Frequently Asked Questions (FAQ)

Q: Are IPL1-105-01-L-S-RE1-K and IPL1-105-01-L-S-RA-K interchangeable?

A: Yes. Both parts are direct equivalents within the Mini Mate® IPL1 series. They share identical pitch (0.100" / 2.54mm), position count (5), mounting type (through-hole right-angle), termination method (solder), and electrical ratings (675VAC / 954VDC). Both are ROHS3 compliant with UL94 V-0 flammability rating.

Q: What determines substitution eligibility for this connector header?

A: Substitution is valid when parts maintain identical mating pitch, position count, row configuration, mounting orientation, shrouding design, termination method, contact material, insulation material, and electrical/environmental ratings. Both parts meet these criteria.

Q: Are there any packaging or handling differences between these parts?

A: Both parts are supplied in tube packaging with Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture control requirements during storage or handling.

Q: Can these connectors be used in applications requiring UL94 V-0 compliance?

A: Yes. Both the IPL1-105-01-L-S-RE1-K and IPL1-105-01-L-S-RA-K carry UL94 V-0 material flammability certification and are suitable for applications with this requirement.