IPL1-104-01-F-D-P Equivalent & Substitute Parts

Part Overview

The IPL1-104-01-F-D-P is an active rectangular connector header manufactured by Samtec Inc. as part of the Mini Mate® IPL1 series. This through-hole connector is designed for board-to-cable/wire applications with 8 positions arranged in 2 rows at 0.100" (2.54mm) pitch. The part is currently in production with 1,132 units in stock. Alternative part numbers within the same series may be required due to inventory availability, supply chain considerations, or specific application requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

IPL1-104-01-F-D-P

Samtec Inc.In Stock: 1145IPL1-104-01-F-D-P Datasheet

Current PartRFQ

IPL1-104-01-F-D-K

Samtec Inc.In Stock: 761IPL1-104-01-F-D-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The IPL1-104-01-F-D-P connector qualifies for substitution with IPL1-104-01-F-D-K based on the following criteria:

Both parts share identical specifications across all critical electrical and mechanical parameters that define connector compatibility:

• Same manufacturer (Samtec Inc.) and series (Mini Mate® IPL1)
• Identical connector type, contact type, and pin configuration (8 positions, 2 rows)
• Matching pitch specifications (0.100" mating pitch and row spacing)
• Identical mounting method (through hole) and termination (solder)
• Same shrouding configuration (shrouded - 4 wall)
• Matching contact materials, finishes, and dimensions
• Identical insulation material (Liquid Crystal Polymer)
• Same operating temperature range (-55°C ~ 125°C)
• Identical voltage ratings (675VAC, 954VDC)
• Matching compliance certifications (UL94 V-0, ROHS3 Compliant, MSL 1)

The substitution is valid because all allowed electrical and mechanical parameters are identical between the main part and substitute part.

Parameter Comparison

Engineering Selection Recommendations

Both IPL1-104-01-F-D-P and IPL1-104-01-F-D-K are active products manufactured by Samtec Inc. with full ROHS3 compliance and UL94 V-0 flammability certification. The parts are electrically and mechanically interchangeable across all specified parameters. Selection between these parts should be based on inventory availability and supply chain requirements. The IPL1-104-01-F-D-P currently has higher stock levels (1,132 units) compared to IPL1-104-01-F-D-K (704 units). Both parts maintain identical performance characteristics for board-to-cable/wire applications requiring 8-position through-hole headers with 2.54mm pitch.

Frequently Asked Questions (FAQ)

Q: Are IPL1-104-01-F-D-P and IPL1-104-01-F-D-K fully interchangeable?

A: Yes. Both parts share identical electrical and mechanical specifications including connector type, pin configuration, pitch, mounting method, contact materials, finishes, operating temperature range, and voltage ratings. They are direct substitutes within the Mini Mate® IPL1 series.

Q: What is the difference between these two part numbers?

A: The parts are functionally identical. The difference in part number designation (suffix -F-D-P versus -F-D-K) reflects internal Samtec manufacturing or packaging variations that do not affect electrical or mechanical performance.

Q: Can I use IPL1-104-01-F-D-K as a replacement for IPL1-104-01-F-D-P in existing designs?

A: Yes. Since all specified parameters are identical, IPL1-104-01-F-D-K can be used as a direct replacement without design modifications or re-qualification.

Q: Are both parts RoHS compliant?

A: Yes. Both IPL1-104-01-F-D-P and IPL1-104-01-F-D-K are ROHS3 compliant with UL94 V-0 flammability certification.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: What are the mating pitch specifications?

A: Both connectors feature 0.100" (2.54mm) mating pitch with 0.100" (2.54mm) row spacing for the 2-row, 8-position configuration.