IPL1-102-02-S-D-P Equivalent & Substitute Parts

Part Overview

The IPL1-102-02-S-D-P is a surface mount rectangular connector header manufactured by Samtec Inc. within the Mini Mate® IPL1 series. This connector is a 4-position, 2-row header with 0.100" (2.54mm) pitch spacing, designed for board-to-cable/wire applications. The part is currently active in production with 864 units in stock. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and component availability across manufacturing cycles.

Substiute Parts

IPL1-102-02-S-D-P

Samtec Inc.In Stock: 952IPL1-102-02-S-D-P Datasheet

Current PartRFQ

IPL1-102-02-S-D-K

Samtec Inc.In Stock: 1209IPL1-102-02-S-D-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IPL1-102-02-S-D-P are determined by strict equivalence across the following critical parameters:

• Connector Type & Series: Header within Mini Mate® IPL1 series
• Position & Row Configuration: 4 positions, 2 rows
• Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
• Mounting Technology: Surface mount termination
• Shrouding Design: Shrouded - 4 wall configuration
• Contact Specifications: Male pin, square contact shape, phosphor bronze material
• Electrical Ratings: 675VAC / 954VDC voltage rating
• Temperature Range: -55°C ~ 125°C operating temperature
• Compliance: ROHS3 compliant, UL94 V-0 flammability rating

The substitute part IPL1-102-02-S-D-K matches all critical parameters with one distinction: the fastening type designation differs (K vs. P suffix), indicating a variation within the same connector family that maintains full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both IPL1-102-02-S-D-P and IPL1-102-02-S-D-K are active production parts from Samtec Inc. with identical electrical, mechanical, and compliance specifications. Selection between these parts should be based on:

Availability: IPL1-102-02-S-D-K currently maintains higher inventory (1186 units) compared to IPL1-102-02-S-D-P (864 units), making it suitable for high-volume procurement scenarios.

Compliance: Both parts meet ROHS3 compliance and UL94 V-0 flammability requirements, ensuring regulatory alignment for industrial and consumer applications.

Functional Equivalence: The suffix designation (P vs. K) represents a fastening type variation within the Mini Mate® IPL1 family. Both maintain identical mating pitch, row spacing, contact configuration, and electrical ratings, confirming direct substitutability in board-to-cable/wire connector applications.

Supply Chain Continuity: Either part may be selected as a primary or secondary source component without design modification, provided the fastening mechanism is compatible with the intended application.

Frequently Asked Questions (FAQ)

Q: Are IPL1-102-02-S-D-P and IPL1-102-02-S-D-K electrically interchangeable?

A: Yes. Both parts share identical voltage ratings (675VAC, 954VDC), operating temperature range (-55°C ~ 125°C), contact materials, and finishes. They are electrically equivalent for all standard applications.

Q: What does the suffix letter (P vs. K) indicate?

A: The suffix designates the fastening type within the Mini Mate® IPL1 series. Both variants maintain the same connector geometry, pitch spacing (0.100"), and shrouding configuration, ensuring mechanical compatibility.

Q: Can I use IPL1-102-02-S-D-K as a direct replacement for IPL1-102-02-S-D-P on an existing PCB?

A: Yes. Both parts are surface mount headers with identical footprint specifications, insulation height (0.320"), and contact positioning. No PCB redesign is required.

Q: Are both parts RoHS compliant?

A: Yes. Both IPL1-102-02-S-D-P and IPL1-102-02-S-D-K are ROHS3 compliant and meet UL94 V-0 flammability standards.

Q: Which part should I select for new designs?

A: Either part is suitable for new designs. Selection may be based on current inventory availability or supply chain preference. Both are active production parts with identical specifications.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no special moisture control requirements during storage or handling.