Samtec IPL1-102-02-H-D-P Equivalent & Substitute Parts

Part Overview

The Samtec IPL1-102-02-H-D-P is a surface mount rectangular connector header from the Mini Mate® IPL1 series. This connector is designed for board-to-cable/wire applications with 4 positions arranged in 2 rows at 0.100" (2.54mm) pitch. The part is currently active in production with 955 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, lead time considerations, or design flexibility within the same connector family.

Substiute Parts

IPL1-102-02-H-D-P

Samtec Inc.In Stock: 1002IPL1-102-02-H-D-P Datasheet

Current PartRFQ

IPL1-102-02-H-D-K

Samtec Inc.In Stock: 1576IPL1-102-02-H-D-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The IPL1-102-02-H-D-K is identified as a direct substitute for the IPL1-102-02-H-D-P based on the following critical parameters that determine functional equivalence:

Electrical Parameters:

• Identical pitch spacing (0.100" / 2.54mm mating pitch)
• Identical row spacing (0.100" / 2.54mm)
• Identical voltage rating (675VAC, 954VDC)
• Identical operating temperature range (-55°C ~ 125°C)

Mechanical Parameters:

• Identical number of positions (4) and rows (2)
• Identical connector type (Header, Male Pin)
• Identical mounting type (Surface Mount)
• Identical shrouding configuration (Shrouded - 4 Wall)
• Identical termination method (Solder)

Material & Compliance Parameters:

• Identical contact material (Phosphor Bronze)
• Identical insulation material (Liquid Crystal Polymer - LCP)
• Identical contact finish (Gold)
• Identical RoHS compliance status (ROHS3 Compliant)
• Identical flammability rating (UL94 V-0)

Both parts belong to the same Mini Mate® IPL1 series and share the same base product number (IPL1-102), confirming their interchangeability within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the IPL1-102-02-H-D-P and IPL1-102-02-H-D-K are active production parts with full ROHS3 compliance and UL94 V-0 flammability certification. The parts are functionally equivalent across all specified electrical and mechanical parameters. Selection between these parts may be based on inventory availability, as the IPL1-102-02-H-D-K currently has higher stock levels (1550 units versus 955 units). Both parts maintain identical compliance certifications and operational specifications, making either suitable for applications requiring Mini Mate® IPL1 series 4-position surface mount headers with 2.54mm pitch.

Frequently Asked Questions (FAQ)

Q: Can IPL1-102-02-H-D-K be used as a direct replacement for IPL1-102-02-H-D-P?

A: Yes. Both parts share identical electrical specifications (voltage rating, operating temperature), mechanical dimensions (pitch, row spacing, contact length), and material properties (contact finish, insulation material). They are functionally interchangeable within the same application.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is based on matching: mating pitch (0.100" / 2.54mm), number of positions (4), number of rows (2), row spacing (0.100" / 2.54mm), mounting type (Surface Mount), connector type (Header with Male Pins), shrouding configuration (Shrouded - 4 Wall), contact material (Phosphor Bronze), contact finish (Gold), voltage rating (675VAC, 954VDC), and operating temperature range (-55°C ~ 125°C).

Q: Are there any differences in compliance or certification between these parts?

A: No. Both parts are ROHS3 compliant, carry UL94 V-0 flammability rating, have MSL 1 (Unlimited) moisture sensitivity level, and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: What is the difference between the part numbers IPL1-102-02-H-D-P and IPL1-102-02-H-D-K?

A: The parts share the same base product number (IPL1-102) and identical specifications. The suffix difference (P versus K) does not reflect any electrical or mechanical variation in the provided parameters. Both are Mini Mate® IPL1 series headers with 4 positions at 2.54mm pitch.

Q: Can these connectors be used interchangeably in PCB assembly?

A: Yes. Both parts have identical surface mount footprints, solder termination specifications, and mechanical dimensions. They can be used interchangeably in PCB designs without requiring layout or assembly process modifications.