IPL1-102-01-L-D-RA-G Equivalent & Substitute Parts

Part Overview

The IPL1-102-01-L-D-RA-G is an active rectangular connector header manufactured by Samtec Inc. within the Mini Mate® IPL1 series. This through-hole, right-angle connector accommodates 4 positions at 0.100" (2.54mm) pitch and is designed for board-to-cable/wire applications. The part is in active production status with 1112 units currently in stock. Substitute parts are identified when electrical specifications, mechanical dimensions, and compliance certifications remain equivalent across the connector interface.

Substiute Parts

IPL1-102-01-L-D-RA-G

Samtec Inc.In Stock: 1125IPL1-102-01-L-D-RA-G Datasheet

Current PartRFQ

IPL1-102-01-L-D-RA-K

Samtec Inc.In Stock: 3496IPL1-102-01-L-D-RA-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IPL1-102-01-L-D-RA-G is determined by strict equivalence across the following parameters:

• Connector type, contact type, and mating interface (Header, Male Pin, 4 positions, 2 rows)
• Pitch and row spacing (0.100" / 2.54mm)
• Mounting configuration (Through Hole, Right Angle)
• Electrical ratings (675VAC, 954VDC)
• Operating temperature range (-55°C ~ 125°C)
• Material and compliance certifications (UL94 V-0, ROHS3 Compliant)
• Contact finish specifications (Gold mating surface, Tin post)
• Insulation material (Liquid Crystal Polymer)

The identified substitute part maintains all these parameters without deviation, ensuring direct functional and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both IPL1-102-01-L-D-RA-G and IPL1-102-01-L-D-RA-K are active production parts with equivalent electrical and mechanical specifications. Selection between these parts may be based on inventory availability. The IPL1-102-01-L-D-RA-K maintains higher stock levels at 3464 units compared to 1112 units for the IPL1-102-01-L-D-RA-G. Both parts carry ROHS3 compliance and UL94 V-0 flammability certification, meeting current regulatory requirements for rectangular connector applications.

Frequently Asked Questions (FAQ)

Q: Can IPL1-102-01-L-D-RA-K be used as a direct replacement for IPL1-102-01-L-D-RA-G?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical pitch, row spacing, contact configuration, voltage ratings, operating temperature range, and material specifications. No design modifications are required for substitution.

Q: What are the key differences between these two part numbers?

A: The parts differ only in inventory availability. IPL1-102-01-L-D-RA-K has 3464 units in stock versus 1112 units for IPL1-102-01-L-D-RA-G. All functional and compliance parameters are identical.

Q: Are both parts suitable for high-temperature applications?

A: Both parts operate across the -55°C to 125°C temperature range. This specification applies equally to IPL1-102-01-L-D-RA-G and IPL1-102-01-L-D-RA-K.

Q: Do these connectors meet RoHS requirements?

A: Yes. Both IPL1-102-01-L-D-RA-G and IPL1-102-01-L-D-RA-K are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What is the mating pitch for these connectors?

A: Both parts feature a 0.100" (2.54mm) mating pitch with 0.100" (2.54mm) row spacing in a 4-position, 2-row configuration.