IPD1-14-D Equivalent & Substitute Parts

Part Overview

The IPD1-14-D is a 28-position rectangular connector housing from Samtec Inc.'s Mini Mate® IPD1 series. This receptacle connector features a 0.100" (2.54mm) pitch configuration with dual-row layout and crimp contact termination. The part is actively manufactured and ROHS3 compliant, making it suitable for applications requiring standard rectangular interconnection in compact form factors. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector family, ensuring functional interchangeability within specified design constraints.

Substiute Parts

IPD1-14-D

Samtec Inc.In Stock: 1200IPD1-14-D Datasheet

Current PartRFQ

IPD1-14-D-K

Samtec Inc.In Stock: 995IPD1-14-D-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IPD1-14-D is determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Receptacle with female socket contacts
• Position Count & Pitch: 28 positions at 0.100" (2.54mm) pitch
• Physical Layout: Dual-row configuration with 0.100" (2.54mm) row spacing
• Termination Method: Crimp contact termination
• Fastening Mechanism: Latch lock retention
• Material & Color: Polyamide (PA66) housing in white
• Compliance: ROHS3 compliant with MSL 1 rating

The identified substitute part IPD1-14-D-K maintains all core electrical and mechanical parameters while introducing a polarizing key feature. This addition does not compromise functional interchangeability when the polarizing key requirement is compatible with the application design.

Parameter Comparison

Engineering Selection Recommendations

Both IPD1-14-D and IPD1-14-D-K are active products with ROHS3 compliance and MSL 1 ratings, indicating equivalent environmental and regulatory suitability. The primary distinction is the polarizing key feature integrated into the IPD1-14-D-K variant. Selection between these parts depends on application-level requirements: the standard IPD1-14-D is appropriate for applications without polarization constraints, while the IPD1-14-D-K is specified when connector orientation control is required. Both parts maintain identical electrical and mechanical interfaces across the 28-position, 2.54mm pitch configuration.

Frequently Asked Questions (FAQ)

Q: Can IPD1-14-D-K replace IPD1-14-D in existing designs?

A: Functional replacement is possible when the polarizing key does not conflict with the mating connector design. The polarizing key is an additive feature that does not alter the core electrical or mechanical interface. Design verification is necessary to confirm compatibility with existing mating components.

Q: What is the significance of the polarizing key feature?

A: The polarizing key in IPD1-14-D-K provides mechanical orientation control during mating, preventing incorrect connector alignment. This feature is absent in the standard IPD1-14-D configuration.

Q: Are the contact termination methods identical?

A: Both parts use crimp contact termination. Contacts are not included with either housing and must be sourced separately.

Q: Do both parts meet the same compliance standards?

A: Both IPD1-14-D and IPD1-14-D-K are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity ratings, indicating equivalent regulatory and environmental performance.

Q: What is the pitch specification, and why is it critical?

A: Both parts operate at 0.100" (2.54mm) pitch with 0.100" (2.54mm) row spacing in a dual-row configuration. Pitch determines physical compatibility with mating connectors and PCB footprints; deviation from this specification prevents proper mating.

Q: Are there inventory considerations for part selection?

A: IPD1-14-D has 1136 units in stock, while IPD1-14-D-K has 913 units available. Inventory levels may influence procurement decisions based on project timelines and volume requirements.