IPD1-11-D-P-M Equivalent & Substitute Parts

Part Overview

The IPD1-11-D-P-M is a 22-position rectangular connector housing from Samtec Inc.'s Mini Mate® IPD1 series. This receptacle connector is designed for applications requiring reliable interconnection with 0.100" (2.54mm) pitch spacing and crimp contact termination. The part is actively manufactured and maintained in production inventory. Identifying equivalent and substitute parts is essential for supply chain continuity, inventory optimization, and ensuring design flexibility across manufacturing batches and procurement cycles.

Substiute Parts

IPD1-11-D-P-M

Samtec Inc.In Stock: 1149IPD1-11-D-P-M Datasheet

Current PartRFQ

IPD1-11-D-K

Samtec Inc.In Stock: 1370IPD1-11-D-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IPD1-11-D-P-M is determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Receptacle with female socket contacts
• Electrical Interface: 22-position layout with 0.100" (2.54mm) pitch and 2-row configuration
• Mechanical Compatibility: Free hanging (in-line) mounting with latch lock fastening and polarizing key
• Termination Method: Crimp contact termination
• Material & Environmental Compliance: Polyamide (PA66) insulation, ROHS3 compliance, and MSL 1 rating

The IPD1-11-D-K qualifies as a direct substitute because it maintains identical specifications across all critical parameters while remaining within the same Mini Mate® IPD1 series from Samtec Inc.

Parameter Comparison

Engineering Selection Recommendations

Both the IPD1-11-D-P-M and IPD1-11-D-K are active production parts from Samtec Inc. with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability, procurement lead times, or supply chain requirements. Both parts maintain MSL 1 rating, indicating no moisture sensitivity constraints during storage or handling. The difference in part numbering (suffix -P-M versus -K) reflects internal Samtec designation but does not indicate functional or performance differences in the connector housing itself.

Frequently Asked Questions (FAQ)

Q: Can IPD1-11-D-K be used as a direct replacement for IPD1-11-D-P-M?

A: Yes. Both parts are identical in connector type, position count, pitch, row configuration, mounting method, fastening mechanism, and material composition. They are functionally interchangeable within the same application.

Q: What does the suffix difference (-P-M versus -K) indicate?

A: The suffix designates internal Samtec part numbering conventions. Both suffixes refer to the same Mini Mate® IPD1 series 22-position receptacle housing with identical specifications.

Q: Are there any compliance or environmental differences between these parts?

A: No. Both parts carry ROHS3 compliance certification and MSL 1 rating. Environmental performance and regulatory compliance are equivalent.

Q: What is the base product number for these parts?

A: Both IPD1-11-D-P-M and IPD1-11-D-K share the base product number IPD1-11, confirming their equivalence within the Mini Mate® IPD1 series.

Q: Do these housings include contacts?

A: No. Both parts are connector housings only. Contacts must be procured separately and crimped into the housing according to Samtec specifications.

Q: What is the pitch and row spacing configuration?

A: Both parts feature 0.100" (2.54mm) pitch with 2 rows spaced 0.100" (2.54mm) apart, accommodating 22 total positions in a standard dual-row layout.