IPD1-11-D-M Equivalent & Substitute Parts

Part Overview

The IPD1-11-D-M is a 22-position rectangular connector housing manufactured by Samtec Inc. as part of the Mini Mate® IPD1 series. This receptacle connector features a 0.100" (2.54mm) pitch configuration with dual-row layout and crimp contact termination. The part is actively produced and ROHS3 compliant, making it suitable for applications requiring standard rectangular interconnection in compact form factors. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector series, ensuring functional interchangeability within specified design constraints.

Substiute Parts

IPD1-11-D-M

Samtec Inc.In Stock: 1084IPD1-11-D-M Datasheet

Current PartRFQ

IPD1-11-D-K

Samtec Inc.In Stock: 1370IPD1-11-D-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IPD1-11-D-M is determined by strict equivalence across the following critical parameters:

• Manufacturer series consistency (Mini Mate® IPD1)
• Identical connector type and contact configuration (Receptacle, Female Socket)
• Matching position count and pitch specifications (22 positions, 0.100" pitch)
• Equivalent row configuration and spacing (2 rows, 0.100" spacing)
• Identical mounting and termination methods (Free Hanging, Crimp)
• Matching fastening mechanism (Latch Lock)
• Consistent material and environmental compliance (PA66/Nylon 6/6, ROHS3, MSL 1)

The IPD1-11-D-K qualifies as a direct substitute based on full alignment with these parameters. The addition of a polarizing key feature in the IPD1-11-D-K does not affect electrical or mechanical interchangeability with the base IPD1-11-D-M housing, as this feature provides enhanced assembly guidance without altering connector geometry or electrical performance.

Parameter Comparison

Engineering Selection Recommendations

Both the IPD1-11-D-M and IPD1-11-D-K maintain active product status with full ROHS3 compliance and unlimited moisture sensitivity rating. Selection between these parts should be based on application-specific requirements:

The IPD1-11-D-M provides a standard receptacle housing without polarization features, suitable for applications where connector orientation is managed through external design controls or where polarization is not required.

The IPD1-11-D-K incorporates a polarizing key feature, providing mechanical guidance during mating operations. This feature enhances assembly reliability in applications where connector orientation must be enforced at the component level.

Both parts are manufactured from identical insulation materials (PA66/Nylon 6/6) and share equivalent electrical and mechanical specifications. The choice between them depends solely on whether polarization guidance is necessary for the intended application.

Frequently Asked Questions (FAQ)

Q: Can IPD1-11-D-K be used as a direct replacement for IPD1-11-D-M?

A: Yes. The IPD1-11-D-K is electrically and mechanically equivalent to the IPD1-11-D-M. Both housings maintain identical position counts, pitch specifications, row configurations, and termination methods. The polarizing key in the IPD1-11-D-K does not affect interchangeability.

Q: What is the functional difference between the IPD1-11-D-M and IPD1-11-D-K?

A: The IPD1-11-D-K includes a polarizing key feature that provides mechanical guidance during connector mating. The IPD1-11-D-M is a standard housing without this feature. Both parts are otherwise functionally identical.

Q: Are these connectors compatible with the same contact sets?

A: Yes. Both the IPD1-11-D-M and IPD1-11-D-K accept identical crimp contacts designed for the Mini Mate® IPD1 series. Contact selection is independent of housing variant.

Q: What does MSL 1 (Unlimited) mean for these connectors?

A: Moisture Sensitivity Level 1 indicates the lowest moisture sensitivity classification. These connectors can be stored and handled without special moisture control measures and have unlimited shelf life under standard conditions.

Q: Are both parts ROHS3 compliant?

A: Yes. Both the IPD1-11-D-M and IPD1-11-D-K are ROHS3 compliant, meeting current European Union restrictions on hazardous substances.