IPD1-02-D-P Equivalent & Substitute Parts

Part Overview

The IPD1-02-D-P is a 4-position rectangular connector housing from Samtec Inc.'s Mini Mate® IPD1 series. This receptacle connector features a 0.100" (2.54mm) pitch configuration with female socket contacts, designed for free-hanging in-line mounting applications. The connector is actively produced and ROHS3 compliant, making it suitable for modern electronic assemblies. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the Mini Mate® IPD1 series, ensuring functional interchangeability in circuit designs.

Substiute Parts

IPD1-02-D-P

Samtec Inc.In Stock: 869IPD1-02-D-P Datasheet

Current PartRFQ

IPD1-02-D-K

Samtec Inc.In Stock: 2126IPD1-02-D-K Datasheet

SimilarRFQ

IPD1-02-D-P-M

Samtec Inc.In Stock: 1005IPD1-02-D-P-M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IPD1-02-D-P are identified within the Mini Mate® IPD1 series based on strict parameter equivalence. All substitute parts maintain identical electrical and mechanical specifications:

• Same connector type (Receptacle) and contact type (Female Socket)
• Identical position count (4) and pitch configuration (0.100" / 2.54mm)
• Matching row configuration (2 rows, 0.100" row spacing)
• Equivalent mounting type (Free Hanging In-Line) and termination method (Crimp)
• Identical fastening mechanism (Latch Lock) and polarizing key feature
• Same insulation material (Polyamide PA66, Nylon 6/6)
• Matching compliance status (ROHS3 Compliant, MSL 1)

The IPD1-02-D-P and its substitutes differ only in specific connector variants designated by suffix codes, which do not affect functional interchangeability in standard applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—IPD1-02-D-P, IPD1-02-D-K, and IPD1-02-D-P-M—are active products from Samtec Inc. with ROHS3 compliance and MSL 1 rating. Selection between these parts is based on availability and application-specific requirements within the Mini Mate® IPD1 series. Each part maintains identical electrical and mechanical specifications, ensuring direct substitution capability in rectangular connector applications requiring 4-position, 2.54mm pitch receptacle housings with crimp termination and latch lock fastening.

Frequently Asked Questions (FAQ)

Q: Can IPD1-02-D-K be used as a direct replacement for IPD1-02-D-P?

A: Yes. Both parts are Mini Mate® IPD1 series receptacles with identical electrical and mechanical parameters: 4 positions, 0.100" pitch, 2 rows with 0.100" row spacing, female socket contacts, crimp termination, latch lock fastening, and white polyamide insulation. The suffix designation does not affect functional interchangeability.

Q: What is the difference between IPD1-02-D-P and IPD1-02-D-P-M?

A: Both parts share identical electrical and mechanical specifications within the Mini Mate® IPD1 series. Differences are limited to connector variant designations indicated by suffix codes, which do not impact performance in standard applications.

Q: Are all three parts ROHS3 compliant?

A: Yes. IPD1-02-D-P, IPD1-02-D-K, and IPD1-02-D-P-M are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What mounting configuration do these connectors support?

A: All three parts are configured for free-hanging in-line mounting with crimp contact termination and latch lock fastening, suitable for standard rectangular connector applications.

Q: Can these connectors be used interchangeably in PCB assembly?

A: Yes, within the constraints of the Mini Mate® IPD1 series specifications. All three parts maintain identical pitch (0.100"), row spacing (0.100"), position count (4), and mounting type (free-hanging in-line), ensuring mechanical and electrical compatibility in circuit designs.