IPD06P005NSAUMA1 P-Channel MOSFET Equivalent & Substitute Parts

Part Overview

The IPD06P005NSAUMA1 is a P-Channel MOSFET manufactured by Infineon Technologies, rated for 60V drain-to-source voltage with 6.5A continuous drain current at 25°C. This device is packaged in TO-252-3 (DPAK) surface mount configuration and belongs to the OptiMOS™ series. The part is currently classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design support and procurement continuity.

Key Parameters

Parameter	Value	Unit
FET Type	P-Channel	—
Drain to Source Voltage (Vdss)	60	V
Continuous Drain Current (Id) @ 25°C	6.5	A (Tc)
Rds On (Max) @ Id, Vgs	250	mOhm @ 6.5A, 10V
Gate Charge (Qg) @ Vgs	10.6	nC @ 10V
Power Dissipation (Max)	28	W (Tc)
Operating Temperature Range	-55 to 175	°C (TJ)
Package / Case	TO-252-3, DPAK	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution of the IPD06P005NSAUMA1 is determined by strict alignment of the following electrical and mechanical parameters:

Primary Substitution Criteria:

FET Type: P-Channel (mandatory match)
Drain to Source Voltage (Vdss): 60V (mandatory match)
Package / Case: TO-252-3, DPAK (mandatory match for PCB compatibility)
Mounting Type: Surface Mount (mandatory match)

Secondary Compatibility Parameters:

Continuous Drain Current (Id): Equal to or greater than 6.5A
Rds On (Max): Equal to or less than 250 mOhm @ specified conditions
Gate Charge (Qg): Electrical performance indicator; lower values preferred for switching efficiency
Power Dissipation (Max): Equal to or greater than 28W (Tc)
Operating Temperature Range: Must encompass -55°C to 175°C or be compatible with application requirements

Substitute parts are grouped into two categories: Parametric Equivalents (identical electrical specifications) and Manufacturer Recommended Substitutes (compatible but with differing performance characteristics).

Parameter Comparison

Parameter	IPD06P005NSAUMA1	IPD26DP06NMSAUMA1	IPD25DP06NMATMA1	IRFR9024PBF	IRFR9024TRRPBF
Manufacturer	Infineon	Infineon	Infineon	Vishay Siliconix	Vishay Siliconix
FET Type	P-Channel	P-Channel	P-Channel	P-Channel	P-Channel
Vdss (V)	60	60	60	60	60
Id @ 25°C (A)	6.5	—	6.5	8.8	8.8
Rds On (Max) (mOhm)	250 @ 6.5A, 10V	—	250 @ 6.5A, 10V	280 @ 5.3A, 10V	280 @ 5.3A, 10V
Qg (Max) (nC)	10.6 @ 10V	—	10.6 @ 10V	19 @ 10V	19 @ 10V
Power Dissipation (Max) (W)	28 (Tc)	—	28 (Tc)	42 (Tc)	42 (Tc)
Operating Temperature (°C)	-55 to 175	—	-55 to 175	-55 to 150	-55 to 150
Package	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK
Product Status	Obsolete	Active	Active	Active	Active
RoHS Status	—	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

IPD25DP06NMATMA1 (Infineon Technologies)

This part is a parametric equivalent to the IPD06P005NSAUMA1, offering identical electrical specifications including 6.5A continuous drain current, 250 mOhm Rds On, and 28W power dissipation. The IPD25DP06NMATMA1 maintains the same operating temperature range (-55°C to 175°C) and is available in Tape & Reel packaging. Product status is Active with ROHS3 compliance and REACH Unaffected designation. Inventory availability is 3068 pieces. This part is the primary recommendation for direct replacement in existing designs.

IPD26DP06NMSAUMA1 (Infineon Technologies)

This manufacturer-recommended substitute is also from Infineon Technologies and shares the same 60V Vdss rating and TO-252-3 DPAK package. However, detailed electrical parameters (Id, Rds On, Qg, power dissipation, and operating temperature) are not provided in the specification. Product status is Active with ROHS3 compliance. Inventory availability is 1147 pieces. This part may be suitable for applications where the specific electrical parameters are not critical constraints.

IRFR9024PBF and IRFR9024TRRPBF (Vishay Siliconix)

Both Vishay parts are manufacturer-recommended substitutes with enhanced electrical performance characteristics. They provide 8.8A continuous drain current (35% higher than the original 6.5A) and 42W power dissipation (50% higher than the original 28W). Rds On is 280 mOhm at 5.3A, representing a slight increase from the original 250 mOhm specification. Gate charge is 19 nC, approximately 79% higher than the original 10.6 nC. Operating temperature range is -55°C to 150°C, which is 25°C lower than the original specification at the upper limit. Both parts are ROHS3 compliant and available in active status. IRFR9024PBF inventory is 5318 pieces; IRFR9024TRRPBF inventory is 664 pieces. These parts are suitable for applications requiring higher current capacity and power dissipation margins, provided the reduced upper operating temperature limit is acceptable.

Frequently Asked Questions (FAQ)

Q: Can IPD25DP06NMATMA1 be used as a direct replacement for IPD06P005NSAUMA1?

A: Yes. IPD25DP06NMATMA1 is a parametric equivalent with identical electrical specifications: 60V Vdss, 6.5A continuous drain current, 250 mOhm Rds On, 10.6 nC gate charge, and 28W power dissipation. Both devices operate across -55°C to 175°C and use the same TO-252-3 DPAK package. The primary difference is packaging format (Tape & Reel versus bulk) and product status (Active versus Obsolete).

Q: What are the key differences between Infineon and Vishay substitute options?

A: Infineon substitutes (IPD25DP06NMATMA1 and IPD26DP06NMSAUMA1) maintain the same manufacturer ecosystem and OptiMOS™ series characteristics. Vishay substitutes (IRFR9024PBF and IRFR9024TRRPBF) offer higher current capacity (8.8A versus 6.5A) and greater power dissipation capability (42W versus 28W), but with higher gate charge (19 nC versus 10.6 nC) and a reduced upper operating temperature limit (150°C versus 175°C).

Q: Are all substitute parts compatible with the same PCB layout?

A: Yes. All substitute parts listed use the TO-252-3 DPAK package with identical pin configuration and footprint. No PCB layout modifications are required for mechanical compatibility.

Q: What is the significance of the gate charge difference between IPD06P005NSAUMA1 and IRFR9024PBF?

A: Gate charge (Qg) affects switching speed and driver circuit requirements. The IRFR9024PBF has 19 nC gate charge compared to 10.6 nC for the original part. Higher gate charge requires more charge delivery from the gate driver circuit, potentially increasing switching losses and heat generation in the driver stage. This parameter should be evaluated in high-frequency switching applications.

Q: Why is the operating temperature range different for Vishay parts?

A: The IRFR9024PBF and IRFR9024TRRPBF are rated to 150°C maximum junction temperature, compared to 175°C for the Infineon parts. Applications requiring operation at temperatures above 150°C must use Infineon substitutes or the original IPD06P005NSAUMA1 specification.

Q: What does "Product Status: Obsolete" mean for the original part?

A: Obsolete status indicates that the IPD06P005NSAUMA1 is no longer manufactured and will eventually become unavailable. Although 919 pieces are currently in stock, long-term design continuity requires migration to an active substitute part. IPD25DP06NMATMA1 is the recommended migration path due to parametric equivalence.

Q: Can IRFR9024PBF be used in applications requiring the full -55°C to 175°C temperature range?

A: No. IRFR9024PBF is rated only to 150°C maximum junction temperature. Applications requiring operation above 150°C must use Infineon parts (IPD06P005NSAUMA1, IPD25DP06NMATMA1, or IPD26DP06NMSAUMA1).

Q: What is the difference between IRFR9024PBF and IRFR9024TRRPBF?

A: Both parts have identical electrical specifications and performance characteristics. The primary difference is packaging format: IRFR9024PBF is supplied in Tube packaging, while IRFR9024TRRPBF packaging format is not specified in the provided data. Electrical compatibility is complete between these two variants.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message