IPD06P003NSAUMA1 Equivalent & Substitute Parts

Part Overview

The IPD06P003NSAUMA1 is a P-Channel MOSFET manufactured by Infineon Technologies, rated for 60V drain-to-source voltage with 22A continuous drain current at 25°C. This device is packaged in TO-252-3 (DPAK) surface mount configuration and belongs to the OptiMOS™ series. The part is currently classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design support and procurement continuity. Active alternatives with identical or compatible electrical and mechanical specifications are available from Infineon Technologies and Diodes Incorporated.

Key Parameters

Parameter	Value	Unit
Drain to Source Voltage (Vdss)	60	V
Continuous Drain Current (Id) @ 25°C	22	A (Tc)
RDS(on) Max @ 22A, 10V	65	mOhm
Gate Threshold Voltage (Vgs(th)) Max @ 1.04mA	4	V
Gate Charge (Qg) Max @ 10V	39	nC
Power Dissipation Max (Tc)	83	W
Operating Temperature Range	-55 to 175	°C (TJ)
Package Type	TO-252-3, DPAK	Surface Mount
FET Type	P-Channel	—

Substitute Part Grouping Explanation

Substitution eligibility for the IPD06P003NSAUMA1 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

Drain to Source Voltage (Vdss): 60V
Continuous Drain Current (Id) @ 25°C: 22A (Tc)
RDS(on) Max @ 22A, 10V: 65 mOhm
Gate Threshold Voltage (Vgs(th)) Max: 4V @ 1.04mA
Gate Charge (Qg) Max @ 10V: 39 nC
Power Dissipation Max: 83W (Tc)
Operating Temperature Range: -55°C to 175°C (TJ)

Mechanical Equivalence Criteria:

Package Type: TO-252-3, DPAK (2 Leads + Tab), SC-63
Mounting Type: Surface Mount
Moisture Sensitivity Level: 1 (Unlimited)

Regulatory Equivalence Criteria:

REACH Status: REACH Unaffected
ECCN: EAR99
HTSUS: 8541.29.0095

Substitute parts are grouped into two categories: Manufacturer Recommended (direct replacements from Infineon Technologies with active product status) and Parametric Equivalents (functionally compatible alternatives from other manufacturers).

Parameter Comparison

Parameter	IPD06P003NSAUMA1	IPD650P06NMSAUMA1	IPD650P06NMATMA1	DMPH6050SK3-13
Manufacturer	Infineon Technologies	Infineon Technologies	Infineon Technologies	Diodes Incorporated
Product Status	Obsolete	Active	Active	Active
Vdss (V)	60	60	60	60
Id @ 25°C (A)	22 (Tc)	22 (Tc)	22 (Tc)	7.2 (Ta) / 23.6 (Tc)
RDS(on) Max @ 10V (mOhm)	65 @ 22A	65 @ 22A	65 @ 22A	50 @ 7A
Vgs(th) Max (V)	4 @ 1.04mA	4 @ 1.04mA	4 @ 1.04mA	3 @ 250µA
Qg Max @ 10V (nC)	39	39	39	25
Power Dissipation Max (W)	83 (Tc)	83 (Tc)	83 (Tc)	1.9 (Ta)
Operating Temperature (°C)	-55 to 175	-55 to 175	-55 to 175	-55 to 175
Package	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK
Packaging Type	—	—	Tape & Reel (TR)	Cut Tape (CT) & Digi-Reel®
RoHS Status	—	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected
MSL	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Infineon Technologies Substitutes (Manufacturer Recommended):

IPD650P06NMSAUMA1 and IPD650P06NMATMA1 are direct substitutes manufactured by Infineon Technologies with active product status. Both parts maintain identical electrical specifications to the obsolete IPD06P003NSAUMA1 across all critical parameters: 60V Vdss, 22A continuous drain current, 65 mOhm RDS(on), and 83W power dissipation. The primary distinction between these two Infineon alternatives is packaging format: IPD650P06NMSAUMA1 is supplied in standard packaging, while IPD650P06NMATMA1 is supplied in Tape & Reel (TR) format. Both are ROHS3 compliant and carry REACH Unaffected status. Selection between these two should be based on procurement and assembly requirements.

Diodes Incorporated Substitute (Parametric Equivalent):

DMPH6050SK3-13 from Diodes Incorporated provides parametric equivalence with notable differences in power dissipation specification. This device maintains the same 60V Vdss rating, achieves 23.6A continuous drain current at Tc (exceeding the 22A requirement), and operates across the identical temperature range (-55°C to 175°C). The RDS(on) specification of 50 mOhm at 7A represents superior on-resistance performance. However, the power dissipation maximum is specified as 1.9W (Ta) rather than 83W (Tc), reflecting different thermal measurement conditions. Gate charge is lower at 25 nC versus 39 nC. This part is ROHS3 compliant and REACH Unaffected. The DMPH6050SK3-13 is supplied in Cut Tape (CT) and Digi-Reel® packaging.

Regulatory and Compliance Alignment:

All substitute parts maintain REACH Unaffected status and EAR99 ECCN classification consistent with the original part. ROHS3 compliance is confirmed for all active alternatives, supporting modern procurement and environmental requirements.

Frequently Asked Questions (FAQ)

Q: Can IPD650P06NMSAUMA1 or IPD650P06NMATMA1 be used as direct replacements for IPD06P003NSAUMA1?

A: Yes. Both Infineon alternatives maintain identical electrical specifications across all critical parameters: 60V Vdss, 22A continuous drain current at 25°C, 65 mOhm RDS(on) at 22A and 10V, 4V gate threshold voltage, 39 nC gate charge, and 83W power dissipation. Package type, mounting configuration, and thermal characteristics are identical. The primary difference is product status (active versus obsolete) and packaging format.

Q: What is the difference between IPD650P06NMSAUMA1 and IPD650P06NMATMA1?

A: Both parts are electrically and mechanically identical. The distinction is packaging format: IPD650P06NMSAUMA1 is supplied in standard packaging, while IPD650P06NMATMA1 is supplied in Tape & Reel (TR) format for automated assembly. Selection depends on procurement method and assembly line requirements.

Q: Is DMPH6050SK3-13 a suitable substitute for IPD06P003NSAUMA1?

A: DMPH6050SK3-13 provides parametric equivalence with the same 60V Vdss rating, identical operating temperature range, and compatible TO-252-3 package. Continuous drain current at Tc is 23.6A, exceeding the 22A specification. RDS(on) is superior at 50 mOhm. However, power dissipation is specified under different thermal conditions (1.9W Ta versus 83W Tc), and gate charge is lower at 25 nC. Thermal design verification is required when substituting this part.

Q: Are all substitute parts available in the same package?

A: Yes. All substitute parts use the TO-252-3 DPAK (2 Leads + Tab) surface mount package, SC-63 designation. Mechanical compatibility is confirmed. Packaging format (bulk, tape & reel, or cut tape) varies by supplier and part number.

Q: What compliance certifications apply to these substitute parts?

A: All substitute parts maintain REACH Unaffected status and EAR99 ECCN classification. ROHS3 compliance is confirmed for IPD650P06NMSAUMA1, IPD650P06NMATMA1, and DMPH6050SK3-13. Moisture Sensitivity Level is 1 (Unlimited) for all parts.

Q: Which substitute should be selected for new designs?

A: For new designs, IPD650P06NMATMA1 (Infineon, Tape & Reel format) is recommended as the primary choice due to active product status, identical electrical specifications, ROHS3 compliance, and suitability for automated assembly. IPD650P06NMSAUMA1 serves as an alternative if different packaging is required. DMPH6050SK3-13 is suitable when superior RDS(on) performance is beneficial, provided thermal design accounts for different power dissipation specifications.

Q: Can these parts be used interchangeably in existing designs?

A: IPD650P06NMSAUMA1 and IPD650P06NMATMA1 are direct electrical and mechanical equivalents and can be used interchangeably with IPD06P003NSAUMA1. DMPH6050SK3-13 requires design verification due to differences in power dissipation specification and gate charge characteristics, despite electrical parameter compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message