Equivalent & Substitute Parts Reference for IP2415SA

Part Overview

The XP Power IP2415SA is a DC DC converter, specifically an isolated module with a single output of 15V at up to 200mA. It accommodates a wide input voltage range from 9V to 36V and delivers an output power of 3W. The product is currently active and available in significant inventory. Finding alternative models is essential in cases of supply chain constraints, system redesign, or when cross-referencing for compliance, compatibility, and sourcing flexibility within the isolated DC DC converter category.

Key Parameters

Manufacturer Part Number	Manufacturer	Description	Detailed Description	Series	Product Status	Type	Number of Outputs	Voltage - Input (Min)	Voltage - Input (Max)	Voltage - Output 1	Current - Output (Max)	Power (Watts)	Voltage - Isolation	Features	Operating Temperature	Efficiency	Mounting Type	Package / Case	Size / Dimension	Control Features	RoHS Status	MSL	ECCN	HTSUS
IP2415SA	XP Power	DC DC CONVERTER 15V 3W	Isolated Module DC DC Converter 1 Output 15V 200mA 9V - 36V Input	IP (3W)	Active	Isolated Module	1	9V	36V	15V	200mA	3 W	1.6 kV	Remote On/Off, SCP	-40°C ~ 85°C	82%	Through Hole	8-SIP Module, 7 Leads	0.86" L x 0.36" W x 0.44" H (21.9mm x 9.2mm x 11.1mm)	Enable, Active Low	ROHS3 Compliant	1 (Unlimited)	EAR99	8504.40.9580

Substitute Part Grouping Explanation

Substitute parts are grouped based strictly on identical key parameters that define electrical and mechanical compatibility. For the IP2415SA, substitute eligibility requires matching the following explicit parameters:

Input Voltage Range (9V - 36V)
Output Voltage (15V)
Output Current (200mA)
Output Power (3W)
Type (Isolated Module)
Number of Outputs (1)
Product Category (DC DC converter)
Package/Case and Mounting Type

Parameter Comparison

Manufacturer Part Number	Manufacturer	Description	Detailed Description	Series	Voltage - Input (Min)	Voltage - Input (Max)	Voltage - Output 1	Current - Output (Max)	Power (Watts)	Number of Outputs	Type
IP2415SA	XP Power	DC DC CONVERTER 15V 3W	Isolated Module DC DC Converter 1 Output 15V 200mA 9V - 36V Input	IP (3W)	9V	36V	15V	200mA	3 W	1	Isolated Module
SPBW03F-15	MEAN WELL USA Inc.	DC DC CONVERTER 15V 3W	Isolated Module DC DC Converter 1 Output 15V 200mA 9V - 36V Input	SPBW03 (3W)	9V	36V	15V	200mA	3 W	1	Isolated Module

Engineering Selection Recommendations

Both IP2415SA and SPBW03F-15 are active status products and compliant with ROHS3 where applicable. They have unlimited Moisture Sensitivity Level (MSL 1) or equivalent, and fall under ECCN EAR99, facilitating flexibility in engineering selection for commercial ITE applications. Selection between these models can be based solely on the explicit key parameters and compliance fields provided.

Frequently Asked Questions (FAQ)

Q1: What parameters must match for substitution between IP2415SA and SPBW03F-15?
A1: Substitution is determined by matching input voltage range, output voltage, output current, output power, number of outputs, module type, and product category.

Q2: Are the mounting requirements the same for both models?
A2: Both products are designated as isolated DC DC converter modules; specific package/case compatibility must be checked based on the documented mechanical dimensions and mounting type.

Q3: Is ROHS compliance present on both models?
A3: IP2415SA is ROHS3 compliant. Check the official documentation for SPBW03F-15 to confirm equivalent compliance status.

Q4: Can these substitutes be used interchangeably in all applications?
A4: Substitute use is appropriate when all listed key parameters and compliance fields are satisfied. Review mechanical and application-specific requirements for compatibility.

Q5: What is the significance of ECCN and HTSUS codes in substitute selection?
A5: ECCN EAR99 and HTSUS listing define export and trade categorization, relevant for inventory control and regulatory processing in commercial applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message