INA141U Equivalent & Substitute Parts Reference

Part Overview

The INA141U is an instrumentation amplifier manufactured by Texas Instruments, housed in an 8-SOIC surface mount package. This single-circuit device is designed for precision signal conditioning applications requiring low input offset voltage and low input bias current. The part maintains Active product status with 20,200 units in current inventory stock.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter ranges while maintaining the same package form factor and mounting technology. Substitution becomes necessary due to supply constraints, lead time requirements, or design optimization needs.

Key Parameters

Parameter	INA141U Value	Unit	Substitution Relevance
Amplifier Type	Instrumentation	—	Critical
Number of Circuits	1	—	Critical
Package / Case	8-SOIC (0.154", 3.90mm Width)	—	Critical
Mounting Type	Surface Mount	—	Critical
Slew Rate	4	V/µs	Performance
-3dB Bandwidth	1	MHz	Performance
Current - Input Bias	2	nA	Performance
Voltage - Input Offset	20	µV	Performance
Voltage - Supply Span (Min)	4.5	V	Critical
Voltage - Supply Span (Max)	36	V	Critical
Operating Temperature	-40°C ~ 85°C	—	Application
RoHS Status	ROHS3 Compliant	—	Compliance
Moisture Sensitivity Level	3 (168 Hours)	—	Handling

Substitute Part Grouping Explanation

Substitution logic for the INA141U is based on the following criteria:

Primary Substitutes (Instrumentation Amplifiers): Parts classified as instrumentation amplifiers with single circuit configuration in 8-SOIC package, operating temperature range of -40°C to 85°C, and supply voltage span encompassing 4.5V minimum to 36V maximum.

Secondary Substitutes (General Purpose Amplifiers): Parts classified as general purpose amplifiers with single circuit configuration in 8-SOIC package. These substitutes require verification that supply voltage minimums do not exceed 4.5V and maximums meet or exceed 36V, with operating temperature ranges supporting -40°C to 85°C operation.

Key Electrical Parameters for Substitution:

Slew Rate: 4 V/µs (baseline reference)
Input Bias Current: 2 nA (baseline reference)
Input Offset Voltage: 20 µV (baseline reference)
Bandwidth: 1 MHz (baseline reference)

Packaging and Compliance Requirements:

8-SOIC surface mount package mandatory
ROHS3 compliance required
Operating temperature range must support -40°C to 85°C minimum

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Slew Rate (V/µs)	Bandwidth (MHz)	Input Bias (nA)	Input Offset (µV)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Package
INA141U	Texas Instruments	Instrumentation	4	1	2	20	4.5	36	-40 ~ 85	8-SOIC
AD620ARZ-REEL7	Analog Devices Inc.	Instrumentation	1.2	1	0.5	30	4.6	36	-40 ~ 85	8-SOIC
AD8225ARZ	Analog Devices Inc.	Instrumentation	5	0.9	0.5	50	3.4	36	-40 ~ 85	8-SOIC
LT1167ACS8-1#PBF	Analog Devices Inc.	Instrumentation	1.2	1	0.05	15	4.6	36	0 ~ 70	8-SOIC
LT1167AIS8-1#PBF	Analog Devices Inc.	Instrumentation	1.2	1	0.05	15	4.6	36	-40 ~ 85	8-SOIC
LT1167CS8-1#PBF	Analog Devices Inc.	Instrumentation	1.2	1	0.08	20	4.6	36	0 ~ 70	8-SOIC
ADA4004-1ARZ-R7	Analog Devices Inc.	General Purpose	2.7	12	0.04	40	10	36	-40 ~ 125	8-SOIC
HA9P5127-5Z	Renesas Electronics	General Purpose	10	8.5	0.015	30	10	30	0 ~ 75	8-SOIC
HA9P5127-5ZX96	Renesas Electronics	General Purpose	10	8.5	0.015	30	10	30	0 ~ 75	8-SOIC
LT1012S8#PBF	Analog Devices Inc.	General Purpose	0.2	—	0.025	8	2.4	40	0 ~ 70	8-SOIC
LT1028CS8#PBF	Analog Devices Inc.	General Purpose	15	75	0.03	20	8	36	0 ~ 70	8-SOIC

Engineering Selection Recommendations

Primary Substitutes (Full Compatibility):

AD620ARZ-REEL7 and LT1167AIS8-1#PBF are the primary substitutes for INA141U. Both maintain instrumentation amplifier classification, 8-SOIC packaging, and -40°C to 85°C operating temperature range. AD620ARZ-REEL7 provides equivalent 1 MHz bandwidth with lower input bias current (0.5 nA). LT1167AIS8-1#PBF offers superior input offset voltage (15 µV) and input bias current (0.05 nA) performance while maintaining identical bandwidth and supply voltage specifications.

Secondary Substitutes (Conditional Application):

AD8225ARZ functions as an instrumentation amplifier with -40°C to 85°C temperature range but operates at minimum supply voltage of 3.4V, which is below the INA141U specification of 4.5V minimum. Application circuits must verify adequate supply voltage headroom.

LT1167ACS8-1#PBF and LT1167CS8-1#PBF are instrumentation amplifiers with identical electrical performance to LT1167AIS8-1#PBF but operate within 0°C to 70°C temperature range, restricting use in applications requiring -40°C operation.

General Purpose Amplifier Substitutes (Limited Scope):

ADA4004-1ARZ-R7, HA9P5127-5Z, HA9P5127-5ZX96, LT1012S8#PBF, and LT1028CS8#PBF are classified as general purpose amplifiers rather than instrumentation amplifiers. These parts do not meet the primary substitution criteria due to different amplifier topology and are not recommended for direct replacement in instrumentation amplifier applications.

Compliance Status:

All listed parts maintain ROHS3 compliance and EAR99 export classification consistent with INA141U specifications.

Frequently Asked Questions (FAQ)

Q: Can AD620ARZ-REEL7 directly replace INA141U in all applications?

A: AD620ARZ-REEL7 is electrically compatible with INA141U within the specified parameter ranges. Both are instrumentation amplifiers in 8-SOIC packages with -40°C to 85°C operating temperature and 4.5V to 36V supply voltage specifications. The primary difference is packaging format: AD620ARZ-REEL7 is supplied on Cut Tape & Digi-Reel, while INA141U is supplied in Tube. Verify your assembly process accommodates the packaging format.

Q: What is the difference between LT1167AIS8-1#PBF and LT1167ACS8-1#PBF?

A: Both parts are instrumentation amplifiers with identical electrical specifications. The primary difference is operating temperature range: LT1167AIS8-1#PBF operates -40°C to 85°C (matching INA141U), while LT1167ACS8-1#PBF operates 0°C to 70°C. Select LT1167AIS8-1#PBF for applications requiring full -40°C to 85°C temperature coverage.

Q: Why are general purpose amplifiers listed if they cannot replace INA141U?

A: General purpose amplifiers are included for reference and historical cross-reference purposes. These parts appear in legacy documentation as potential alternatives but do not meet instrumentation amplifier functional requirements. Do not use general purpose amplifiers as direct substitutes for instrumentation amplifier applications.

Q: What does Moisture Sensitivity Level (MSL) 3 mean for INA141U?

A: MSL 3 indicates the component requires controlled moisture exposure for 168 hours maximum after packaging opening. INA141U requires more stringent moisture control than substitute parts rated MSL 1 (Unlimited). Verify your storage and assembly processes meet MSL 3 requirements, or select substitute parts with MSL 1 rating if moisture control is a process constraint.

Q: Can HA9P5127-5Z operate at 4.5V minimum supply voltage?

A: No. HA9P5127-5Z requires minimum 10V supply voltage, which exceeds INA141U's 4.5V minimum specification. This part is not suitable for low-voltage applications. Do not use as a substitute in circuits designed for 4.5V to 5V operation.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance consistent with INA141U. All parts are also REACH Unaffected and classified as EAR99 for export purposes.

Q: What is the significance of the 1 MHz bandwidth specification?

A: The 1 MHz -3dB bandwidth defines the frequency response limit for the instrumentation amplifier. Substitute parts must maintain equivalent or superior bandwidth performance for signal conditioning applications. AD620ARZ-REEL7 and LT1167 series maintain 1 MHz bandwidth matching INA141U specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message