IMS05STR82K Equivalent & Substitute Parts

Part Overview

The IMS05STR82K is a fixed shielded molded inductor manufactured by Vishay Dale, rated at 820 nH inductance with a maximum current rating of 370 mA and DC resistance of 590 mOhm. This component is part of the IMS-5 series and is designed for through-hole axial mounting applications. The part is currently in stock with 1102 pieces available as new original inventory.

Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when supply chain flexibility is required for production planning.

Substiute Parts

IMS05STR82K

Vishay DaleIn Stock: 1116IMS05STR82K Datasheet

Current PartRFQ

9250A-821-RC

Bourns Inc.In Stock: 17509250A-821-RC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IMS05STR82K are identified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Critical Matching Parameters:

• Inductance value: 820 nH
• Current rating: 370 mA minimum
• DC resistance: 590 mOhm maximum
• Shielding type: Shielded
• Core material: Ferrite
• Mounting configuration: Through hole axial
• Tolerance: ±10%

The substitute part 9250A-821-RC from Bourns Inc. meets all specified electrical and mechanical requirements and is classified as an active product with full compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The 9250A-821-RC from Bourns Inc. is a direct electrical and mechanical equivalent to the IMS05STR82K. Both components share identical inductance, current rating, and DC resistance specifications. The Bourns part carries active product status and holds ROHS3 compliance and REACH unaffected certifications, confirming regulatory alignment for current manufacturing standards.

Selection between these parts should be based on availability, lead time, packaging requirements, and supplier preference. Both components are suitable for direct substitution in through-hole axial inductor applications requiring 820 nH inductance at 370 mA current rating.

Frequently Asked Questions (FAQ)

Q: Can the 9250A-821-RC replace the IMS05STR82K in my circuit?

A: Yes. Both components have identical inductance (820 nH), current rating (370 mA), and DC resistance (590 mOhm max). Both are shielded molded inductors with through-hole axial mounting. Electrical and mechanical compatibility is confirmed.

Q: Are there any physical dimension differences between these parts?

A: The 9250A-821-RC has documented dimensions of 0.162" diameter by 0.410" length (4.11mm x 10.41mm). Physical dimensions for the IMS05STR82K are not provided in the available data. Verify PCB layout compatibility before final selection.

Q: What is the tolerance specification for the IMS05STR82K?

A: Tolerance information for the IMS05STR82K is not provided in the available technical data. The 9250A-821-RC carries a ±10% tolerance specification.

Q: Are both parts RoHS compliant?

A: The 9250A-821-RC is ROHS3 compliant and REACH unaffected. RoHS compliance status for the IMS05STR82K is not specified in the available data.

Q: What is the operating temperature range for these inductors?

A: Operating temperature range for the IMS05STR82K is not specified in the available data. The 9250A-821-RC operates from -55°C to 125°C.

Q: Can I use these parts interchangeably in production?

A: Both parts meet the specified electrical requirements for 820 nH inductance at 370 mA. Interchangeability depends on PCB layout compatibility, packaging requirements, and your organization's qualification procedures. Verify physical dimensions and mounting compatibility for your specific application.