IMS05ER562K Equivalent & Substitute Parts

Part Overview

The IMS05ER562K is a 5.6 mH shielded molded inductor manufactured by Vishay Dale, designed for through-hole mounting applications. This component operates at a maximum current rating of 28 mA with a DC resistance of 98.9 Ohm and is part of the IMS-5 series. The inductor is suitable for applications requiring fixed inductance values in the low-current range with shielded construction to minimize electromagnetic interference.

Substitute parts become necessary when the original manufacturer part is unavailable, when supply chain constraints occur, or when design flexibility across multiple qualified suppliers is required. The substitute part must maintain electrical equivalence across all critical parameters including inductance value, current rating, DC resistance, and physical form factor.

Substiute Parts

IMS05ER562K

Vishay DaleIn Stock: 805IMS05ER562K Datasheet

Current PartRFQ

9250A-565-RC

Bourns Inc.In Stock: 8529250A-565-RC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IMS05ER562K is determined by strict equivalence across the following parameters:

• Inductance value: 5.6 mH with ±10% tolerance
• Current rating: minimum 28 mA
• DC resistance: maximum 98.9 Ohm
• Shielding type: Shielded construction required
• Mounting configuration: Through-hole axial package
• Core material: Ferrite core
• Operating temperature range: -55°C to 125°C

The substitute part 9250A-565-RC from Bourns Inc. meets all these criteria and is classified as a direct equivalent. Both components share identical electrical specifications and physical form factors, enabling direct substitution in circuit designs without modification to PCB layouts or schematic connections.

Parameter Comparison

Engineering Selection Recommendations

The 9250A-565-RC from Bourns Inc. is qualified as a direct substitute for the IMS05ER562K. Both components are active products with identical electrical and mechanical specifications across all critical parameters. The Bourns component carries ROHS3 compliance certification and REACH unaffected status, meeting current environmental and regulatory requirements for electronic component manufacturing.

Selection between the original Vishay Dale part and the Bourns substitute should be based on availability, lead time, and procurement cost. Both components are functionally interchangeable in circuit applications without requiring design modifications, PCB layout changes, or performance trade-offs.

Frequently Asked Questions (FAQ)

Q: Can the 9250A-565-RC be used as a direct replacement for the IMS05ER562K without PCB modifications?

A: Yes. Both components share identical inductance values (5.6 mH), current ratings (28 mA), DC resistance (98.9 Ohm max), shielding type (shielded), and axial through-hole package configuration. Direct substitution is possible without PCB layout or schematic changes.

Q: What are the critical parameters that determine substitution eligibility?

A: Substitution eligibility is determined by: inductance value (5.6 mH ±10%), current rating (minimum 28 mA), DC resistance (maximum 98.9 Ohm), shielding requirement (shielded), mounting type (through-hole), package form (axial), and core material (ferrite).

Q: Are there any compliance or regulatory differences between these parts?

A: The Bourns 9250A-565-RC carries ROHS3 compliance and REACH unaffected certification. Compliance documentation for the Vishay Dale IMS05ER562K was not provided in the available specifications. Verify compliance requirements for your specific application before final component selection.

Q: What is the saturation current specification, and why does it matter?

A: The Bourns part specifies a saturation current (Isat) of 17 mA. This indicates the current level at which the inductor begins to lose inductance due to core saturation. For applications operating at or near the 28 mA rating, saturation characteristics should be evaluated against circuit performance requirements.

Q: Are there any packaging or inventory considerations?

A: The Vishay Dale IMS05ER562K is available in tape and reel packaging with 755 pieces in stock. The Bourns 9250A-565-RC is available in bulk packaging with 838 pieces in stock. Packaging format selection depends on assembly process requirements and order quantities.