IMS05EB1R5K Equivalent & Substitute Parts

Part Overview

The IMS05EB1R5K is a 1.5 µH shielded molded inductor manufactured by Vishay Dale, designed for through-hole applications requiring moderate current handling and low DC resistance. This component belongs to the IMS-5 series and is specified for 815 mA maximum current with 120 mOhm maximum DC resistance. The part is currently in stock with 964 pieces available as new original inventory. Substitute parts are identified when equivalent electrical and mechanical specifications are met within the allowed parameter tolerances for this inductor category.

Substiute Parts

IMS05EB1R5K

Vishay DaleIn Stock: 1070IMS05EB1R5K Datasheet

Current PartRFQ

9250A-152-RC

Bourns Inc.In Stock: 10799250A-152-RC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IMS05EB1R5K is determined by strict equivalence across the following parameters:

• Inductance value: 1.5 µH (exact match required)
• Current rating: 815 mA minimum
• DC resistance: 120 mOhm maximum
• Shielding type: Shielded construction
• Mounting configuration: Through-hole axial package
• Core material: Ferrite

The substitute part 9250A-152-RC from Bourns Inc. meets all these criteria and is classified as a direct equivalent within the molded inductor category.

Parameter Comparison

Engineering Selection Recommendations

The 9250A-152-RC from Bourns Inc. is a direct functional equivalent to the IMS05EB1R5K. Both components share identical electrical specifications for inductance, current rating, and DC resistance, with matching shielded ferrite core construction and through-hole axial packaging. The Bourns part carries active product status and ROHS3 compliance certification. Selection between these parts should be based on availability, packaging preference (Bourns supplied in bulk), and any design-specific requirements related to operating temperature range or frequency response characteristics where the Bourns specification data is available.

Frequently Asked Questions (FAQ)

Q: Can the 9250A-152-RC replace the IMS05EB1R5K in existing designs?

A: Yes. Both inductors meet identical electrical and mechanical specifications: 1.5 µH inductance, 815 mA current rating, 120 mOhm maximum DC resistance, shielded ferrite core, and through-hole axial package. No circuit redesign is required.

Q: Are there differences in physical dimensions between these parts?

A: The 9250A-152-RC is specified with dimensions of 0.162" diameter × 0.410" length (4.11 mm × 10.41 mm). Equivalent dimensional data for the IMS05EB1R5K is not provided in the available specifications. Verify physical fit in your application if space constraints are critical.

Q: What is the tolerance specification for inductance?

A: Both the IMS05EB1R5K and 9250A-152-RC carry ±10% inductance tolerance, meeting standard molded inductor specifications.

Q: Are both parts RoHS compliant?

A: The 9250A-152-RC is ROHS3 compliant. RoHS compliance status for the IMS05EB1R5K is not specified in the available data.

Q: What packaging options are available?

A: The IMS05EB1R5K is available through standard inventory channels. The 9250A-152-RC is supplied in bulk packaging. Confirm packaging requirements with your procurement process.