IMN35128P Equivalent & Substitute Parts

Part Overview

The IMN35128P is an inductive proximity sensor manufactured by Crouzet, designed for non-contact detection applications with an 8mm sensing distance. This cylindrical M12-threaded sensor operates in the 10V to 30V supply range and provides PNP normally-open output through a 3-wire connector configuration. The product is currently obsolete, making identification of compatible substitute components essential for system maintenance and component sourcing.

Substiute Parts

IMN35128P

CrouzetIn Stock: 873IMN35128P Datasheet

Current PartRFQ

E2B-M12KN08-M1-B1

Omron Automation and SafetyIn Stock: 234078E2B-M12KN08-M1-B1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IMN35128P is based on strict equivalence across the following critical parameters:

• Sensor type classification (Inductive)
• Sensing distance specification (0.315" / 8mm)
• Output signal configuration (PNP-NO, 3-Wire)
• Supply voltage compatibility (10V ~ 30V range)
• Physical form factor (Cylinder, Threaded - M12)
• Environmental protection rating (IP67)
• Body material composition (Nickel-Plated Brass)
• Operating temperature range (-25°C ~ 70°C)
• Connector termination method

The E2B-M12KN08-M1-B1 from Omron Automation and Safety meets all these parameters and is classified as an active product with current manufacturing status and inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The E2B-M12KN08-M1-B1 is the direct equivalent substitute for the IMN35128P. Both components share identical electrical and mechanical specifications across all critical parameters. The Omron part carries active product status with ROHS3 compliance certification, providing assurance of current manufacturing support and regulatory alignment. The IMN35128P's obsolete status necessitates transition to the E2B-M12KN08-M1-B1 for new designs and ongoing system maintenance where component replacement is required.

Frequently Asked Questions (FAQ)

Q: Can the E2B-M12KN08-M1-B1 directly replace the IMN35128P in existing installations?

A: Yes. Both sensors share identical specifications for sensing distance, output type, supply voltage range, physical form factor, and environmental protection rating. Direct mechanical and electrical substitution is supported.

Q: Are there differences in response frequency between these sensors?

A: The E2B-M12KN08-M1-B1 specifies a response frequency of 800Hz. The IMN35128P does not provide a response frequency specification in the available data. This parameter does not affect substitution eligibility based on the defined equivalence criteria.

Q: What is the significance of the M12 threaded connector?

A: The M12 threaded connector is the standard mechanical interface for both sensors. This cylindrical, threaded form factor ensures physical compatibility in mounting applications designed for M12-class inductive proximity sensors.

Q: Does the transition from RoHS Compliant to ROHS3 Compliant affect compatibility?

A: No. ROHS3 Compliant status represents an updated regulatory certification that maintains backward compatibility. The E2B-M12KN08-M1-B1 meets or exceeds the environmental and material restrictions of the original RoHS Compliant specification.

Q: What packaging options are available for the substitute part?

A: The E2B-M12KN08-M1-B1 is supplied in bulk packaging. The IMN35128P packaging specification is not detailed in the available data. Packaging format does not affect electrical or mechanical substitution.