IMN23124P Equivalent & Substitute Parts

Part Overview

The IMN23124P is an inductive proximity sensor manufactured by Crouzet, designed for non-contact detection applications with a 4mm sensing distance. This cylindrical, threaded M12 connector-based sensor operates in the 10V to 30V supply range and provides NPN-NC output configuration suitable for industrial automation and control systems.

The IMN23124P is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain system functionality, ensure supply chain continuity, and support ongoing maintenance and replacement requirements for installed equipment.

Substiute Parts

IMN23124P

CrouzetIn Stock: 645IMN23124P Datasheet

Current PartRFQ

E2B-M12KS04-M1-C2

Omron Automation and SafetyIn Stock: 902E2B-M12KS04-M1-C2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IMN23124P is based on strict alignment of the following critical parameters:

• Sensor Type: Inductive technology for identical detection principle
• Sensing Distance: 0.157" (4mm) for equivalent detection range
• Output Type: NPN-NC, 3-Wire configuration for signal compatibility
• Shielding: Shielded design for electromagnetic interference rejection
• Body Material: Nickel-Plated Brass for environmental durability
• Supply Voltage Range: 10V ~ 30V for power supply compatibility
• Termination Style: Connector-based for mechanical and electrical interface compatibility
• Operating Temperature Range: -25°C ~ 70°C for thermal environment compatibility
• Ingress Protection: IP67 for sealed operation in wet or dusty environments
• Package / Case: Cylinder, Threaded - M12 for mechanical mounting compatibility

The E2B-M12KS04-M1-C2 from Omron Automation and Safety meets all these critical parameters and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

The E2B-M12KS04-M1-C2 is the qualified substitute for the obsolete IMN23124P. Selection is based on the following engineering criteria:

Product Status: The IMN23124P is obsolete, making the active-status E2B-M12KS04-M1-C2 the appropriate choice for new designs, replacements, and ongoing system support.

Compliance: Both parts maintain RoHS compliance. The E2B-M12KS04-M1-C2 carries ROHS3 certification, representing current regulatory alignment. The E2B-M12KS04-M1-C2 is REACH Unaffected, confirming compliance with chemical substance regulations.

Electrical and Mechanical Compatibility: All critical parameters—sensor type, sensing distance, output configuration, supply voltage, operating temperature, ingress protection, and M12 connector interface—are identical between the two parts, ensuring direct functional equivalence in existing installations.

Availability: The E2B-M12KS04-M1-C2 is currently in active production with confirmed inventory availability, supporting both immediate replacement needs and long-term supply chain planning.

Frequently Asked Questions (FAQ)

Q: Can the E2B-M12KS04-M1-C2 directly replace the IMN23124P in existing installations?

A: Yes. The E2B-M12KS04-M1-C2 is electrically and mechanically compatible with the IMN23124P. Both sensors share identical sensing distance (4mm), output type (NPN-NC, 3-Wire), supply voltage range (10V ~ 30V), operating temperature range (-25°C ~ 70°C), ingress protection (IP67), and M12 threaded connector interface. No circuit modifications or mechanical adaptations are required.

Q: What is the difference in response frequency between these parts?

A: The IMN23124P does not specify a response frequency parameter. The E2B-M12KS04-M1-C2 specifies 1kHz response frequency. This specification in the substitute part does not affect compatibility; it represents the sensor's switching speed capability, which exceeds typical industrial control requirements.

Q: Are there any compliance differences between the IMN23124P and E2B-M12KS04-M1-C2?

A: Both parts are RoHS compliant. The E2B-M12KS04-M1-C2 carries ROHS3 certification and is REACH Unaffected, representing alignment with current environmental and chemical substance regulations. These certifications do not restrict compatibility; they confirm regulatory compliance for the substitute part.

Q: What packaging options are available for the E2B-M12KS04-M1-C2?

A: The E2B-M12KS04-M1-C2 is supplied in bulk packaging. The IMN23124P was supplied with standard packaging. Both packaging formats contain identical sensor components; packaging selection depends on procurement and inventory management requirements.

Q: Is the M12 connector interface identical between both parts?

A: Yes. Both the IMN23124P and E2B-M12KS04-M1-C2 use the same M12 threaded connector interface. The mechanical mounting, connector pinout, and electrical interface are fully compatible, enabling direct installation without adapter cables or mechanical modifications.