IMN22124C Equivalent & Substitute Parts

Part Overview

The IMN22124C is an inductive proximity sensor manufactured by Crouzet, designed for non-contact detection applications with a 4mm sensing distance. This cylindrical, threaded M12 sensor operates in the 10V to 30V supply range and provides NPN-NO output through a 3-wire cable configuration. The product is classified as obsolete, making identification of compatible substitute components essential for system maintenance and new design implementations.

Substiute Parts

IMN22124C

CrouzetIn Stock: 927IMN22124C Datasheet

Current PartRFQ

E2B-M12KS04-WP-C1 2M

Omron Automation and SafetyIn Stock: 1051E2B-M12KS04-WP-C1 2M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2B-M12KS04-WP-C1 2M manufactured by Omron Automation and Safety qualifies as a direct substitute based on alignment across all critical electrical and mechanical parameters. Substitution validity is determined by the following criteria:

• Identical sensor type classification (Inductive)
• Matching sensing distance specification (0.157" / 4mm)
• Identical output configuration (NPN-NO, 3-Wire)
• Overlapping voltage supply range (10V ~ 30V)
• Identical shielding configuration (Shielded)
• Matching body material (Nickel-Plated Brass)
• Identical termination method (Cable Leads)
• Matching operating temperature range (-25°C ~ 70°C)
• Identical ingress protection rating (IP67)
• Identical package form factor (Cylinder, Threaded - M12)

Parameter Comparison

Engineering Selection Recommendations

The E2B-M12KS04-WP-C1 2M is a direct functional equivalent to the IMN22124C. The substitute part maintains all critical electrical and mechanical specifications required for drop-in replacement. The Omron component carries active product status with ROHS3 compliance certification, providing enhanced regulatory alignment compared to the obsolete Crouzet original. Both components meet identical ingress protection and environmental operating requirements, ensuring compatibility in existing system architectures.

Frequently Asked Questions (FAQ)

Q: Can the E2B-M12KS04-WP-C1 2M replace the IMN22124C in existing installations?

A: Yes. Both sensors share identical electrical output characteristics (NPN-NO, 3-Wire), matching voltage supply ranges (10V ~ 30V), and identical mechanical form factors (M12 threaded cylinder). The sensing distance, shielding configuration, and operating temperature ranges are equivalent.

Q: What is the difference in product status between these components?

A: The IMN22124C is classified as obsolete, indicating discontinued manufacturing. The E2B-M12KS04-WP-C1 2M maintains active product status with current manufacturing and supply availability.

Q: Are there differences in regulatory compliance?

A: The IMN22124C carries RoHS Compliant certification. The E2B-M12KS04-WP-C1 2M carries ROHS3 Compliant certification, representing a more current regulatory standard. Both meet the same ingress protection rating (IP67) and environmental specifications.

Q: Does the substitute part require any circuit modifications?

A: No. The identical 3-wire NPN-NO output configuration, voltage supply range, and cable lead termination ensure direct compatibility without circuit redesign.

Q: What is the response frequency specification for the substitute?

A: The E2B-M12KS04-WP-C1 2M specifies a response frequency of 1kHz. This parameter was not provided for the original IMN22124C component.