IMM36128C Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The IMM36128C is an inductive proximity sensor manufactured by Crouzet, designed for non-contact detection of metallic objects at 8mm sensing distance. This sensor features PNP-NC output configuration with 3-wire termination via cable leads and operates across a 10V to 30V supply voltage range. The product is classified as obsolete, making identification of compatible substitute components essential for system maintenance, repair, and new design implementations where equivalent functionality is required.

Substiute Parts

IMM36128C

CrouzetIn Stock: 1211IMM36128C Datasheet

Current PartRFQ

E2B-M12LN08-WP-B2 2M

Omron Automation and SafetyIn Stock: 1035E2B-M12LN08-WP-B2 2M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IMM36128C is determined by strict equivalence across the following critical parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.315" (8mm)
• Output Type: PNP-NC, 3-Wire
• Voltage Supply Range: 10V ~ 30V
• Package / Case: Cylinder, Threaded - M12
• Termination Style: Cable Leads
• Ingress Protection: IP67
• Operating Temperature Range: -25°C ~ 70°C
• Material - Body: Nickel-Plated Brass
• Shielding: Unshielded

The E2B-M12LN08-WP-B2 2M manufactured by Omron Automation and Safety meets all specified parameters and qualifies as a direct functional equivalent. This substitute maintains identical electrical characteristics, mechanical form factor, and environmental ratings required for seamless integration into existing applications.

Parameter Comparison

Engineering Selection Recommendations

The E2B-M12LN08-WP-B2 2M from Omron Automation and Safety is the qualified substitute for the obsolete IMM36128C. Selection is based on the following factors:

• Complete parameter equivalence across all critical electrical and mechanical specifications
• Active product status ensures ongoing availability and supply chain continuity
• ROHS3 compliance exceeds the RoHS Compliant status of the original part, providing enhanced environmental regulatory alignment
• Identical M12 threaded cylinder form factor ensures direct mechanical compatibility
• Matching 10V to 30V supply voltage range and PNP-NC output configuration enable direct circuit integration without modification
• Equivalent IP67 ingress protection and operating temperature range maintain performance in identical environmental conditions

Frequently Asked Questions (FAQ)

Q: Can the E2B-M12LN08-WP-B2 2M be used as a direct replacement for IMM36128C without circuit modifications?

A: Yes. Both sensors share identical output type (PNP-NC, 3-Wire), supply voltage range (10V ~ 30V), and termination style (Cable Leads). Direct substitution is possible without circuit redesign.

Q: Are the mechanical dimensions and mounting interfaces identical?

A: Both sensors use the Cylinder, Threaded - M12 package configuration, ensuring compatible mounting and form factor. Cable lead termination is identical on both parts.

Q: What is the difference in response frequency between these sensors?

A: The E2B-M12LN08-WP-B2 2M specifies a response frequency of 800Hz. The IMM36128C does not provide a response frequency specification in available documentation. Both sensors operate within standard inductive proximity sensor performance parameters for 8mm sensing distance applications.

Q: Does the substitute part meet current environmental compliance standards?

A: Yes. The E2B-M12LN08-WP-B2 2M carries ROHS3 Compliant status and REACH Unaffected designation, exceeding the RoHS Compliant status of the original part and meeting current regulatory requirements.

Q: Is the substitute part currently available?

A: Yes. The E2B-M12LN08-WP-B2 2M is classified as Active product status with 1014 pieces in new original stock, ensuring supply availability for immediate procurement.