IMM3582P Equivalent & Substitute Parts

Part Overview

The IMM3582P is an inductive proximity sensor manufactured by Crouzet, designed for non-contact detection applications with a 2mm sensing distance. This cylindrical M8-threaded sensor operates across a 10V to 30V supply range and provides PNP normally-open output through a 3-wire connector interface. The product is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations.

Substiute Parts

IMM3582P

CrouzetIn Stock: 867IMM3582P Datasheet

Current PartRFQ

IME08-02BPSZT0S

SICK, Inc.In Stock: 3073IME08-02BPSZT0S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IMM3582P is determined by strict alignment across the following critical parameters:

• Sensor Type: Must be inductive technology
• Sensing Distance: Must be 0.079" (2mm)
• Output Configuration: Must be PNP normally-open with 3-wire interface
• Supply Voltage: Must operate within 10V ~ 30V range
• Physical Form Factor: Must be cylindrical with M8 threaded connection
• Shielding Configuration: Must be unshielded
• Body Material: Must be nickel-plated brass
• Environmental Rating: Must maintain IP67 ingress protection
• Termination: Must use connector-based termination

The IME08-02BPSZT0S from SICK, Inc. satisfies all substitution criteria across these parameters, establishing it as a direct functional equivalent.

Parameter Comparison

Engineering Selection Recommendations

The IME08-02BPSZT0S represents the appropriate substitute for the obsolete IMM3582P based on the following factors:

Product Status: The IME08-02BPSZT0S maintains active product status with current manufacturing support, whereas the IMM3582P is classified as obsolete and subject to discontinuation.

Regulatory Compliance: Both sensors maintain RoHS compliance. The IME08-02BPSZT0S carries ROHS3 certification, representing the current regulatory standard. The substitute additionally carries REACH Unaffected status, confirming compliance with European chemical regulations.

Operational Parameters: The IME08-02BPSZT0S operates across an extended upper temperature limit of -25°C to 75°C compared to the IMM3582P range of -25°C to 70°C, providing enhanced thermal margin in high-temperature applications.

Functional Equivalence: All critical electrical and mechanical parameters align between the two sensors, ensuring direct functional substitution without circuit redesign or mechanical modification.

Frequently Asked Questions (FAQ)

Q: Can the IME08-02BPSZT0S be used as a direct replacement for the IMM3582P?

A: Yes. Both sensors share identical specifications across sensing distance (2mm), output type (PNP-NO, 3-wire), supply voltage range (10V–30V), physical form factor (M8 threaded cylinder), and environmental rating (IP67). No circuit or mechanical modifications are required.

Q: What is the difference in operating temperature range between these sensors?

A: The IMM3582P operates from -25°C to 70°C, while the IME08-02BPSZT0S operates from -25°C to 75°C. The substitute provides a 5°C higher upper temperature limit, which may be beneficial in elevated-temperature environments.

Q: Does the IME08-02BPSZT0S have a specified response frequency?

A: Yes. The IME08-02BPSZT0S has a response frequency of 4kHz. The IMM3582P does not specify this parameter in available documentation.

Q: Are both sensors RoHS compliant?

A: Yes. The IMM3582P is RoHS Compliant. The IME08-02BPSZT0S carries ROHS3 Compliant certification, representing the current regulatory standard for RoHS compliance.

Q: What is the connector termination type for these sensors?

A: Both sensors use connector-based termination. Verify connector compatibility with your existing wiring harness or interface before installation.

Q: Is the IME08-02BPSZT0S available in the same packaging as the IMM3582P?

A: The IMM3582P is packaged as individual units, while the IME08-02BPSZT0S is available in bulk packaging. Both maintain identical physical form factors (M8 threaded cylinder). Confirm packaging requirements for your procurement process.