IMM3582M8 Equivalent & Substitute Parts

Part Overview

The IMM3582M8 is an inductive proximity sensor manufactured by Crouzet, designed for non-contact detection applications with a 2mm sensing distance. This cylindrical M8-threaded sensor operates across a 10V to 30V supply range and provides PNP-NO output through a 3-wire connector interface. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in legacy installations.

Substiute Parts

IMM3582M8

CrouzetIn Stock: 751IMM3582M8 Datasheet

Current PartRFQ

IME08-02BPSZT0S

SICK, Inc.In Stock: 3073IME08-02BPSZT0S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IMM3582M8 is determined by strict alignment across the following critical parameters:

Mandatory Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.079" (2mm)
• Output Type: PNP-NO, 3-Wire
• Voltage Supply Range: 10V ~ 30V
• Package / Case: Cylinder, Threaded - M8
• Ingress Protection: IP67
• Termination Style: Connector
• Shielding: Unshielded
• Material - Body: Nickel-Plated Brass

The IME08-02BPSZT0S from SICK, Inc. meets all mandatory parameters and qualifies as a direct functional equivalent. This substitute maintains identical electrical specifications, mechanical form factor, and environmental protection ratings, enabling seamless integration into existing circuit designs and mechanical assemblies.

Parameter Comparison

Engineering Selection Recommendations

The IME08-02BPSZT0S is the qualified substitute for the obsolete IMM3582M8. Selection of this alternative is supported by the following factors:

Product Status: The IME08-02BPSZT0S maintains active product status with current manufacturing support, ensuring long-term availability and supply chain continuity compared to the obsolete IMM3582M8.

Compliance Certification: Both parts maintain RoHS compliance. The IME08-02BPSZT0S carries ROHS3 certification, representing the current regulatory standard. The substitute also carries REACH Unaffected status, confirming compliance with European chemical regulations.

Electrical and Mechanical Compatibility: All critical operating parameters—supply voltage, output configuration, sensing distance, and mechanical form factor—are identical between the two parts. The IME08-02BPSZT0S operates across an extended upper temperature limit of 75°C compared to 70°C for the original part, providing additional thermal margin in applications approaching the upper operating boundary.

Inventory Availability: The IME08-02BPSZT0S is available in significantly higher stock quantities (2982 units) compared to the IMM3582M8 (740 units), supporting both immediate procurement and future replenishment requirements.

Frequently Asked Questions (FAQ)

Q: Can the IME08-02BPSZT0S directly replace the IMM3582M8 in existing installations?

A: Yes. The IME08-02BPSZT0S is electrically and mechanically compatible with the IMM3582M8. Both sensors share identical sensing distance (2mm), output type (PNP-NO, 3-Wire), supply voltage range (10V ~ 30V), M8 threaded cylindrical form factor, and connector termination. No circuit modifications or mechanical redesign are required.

Q: What is the difference in operating temperature range between these parts?

A: The IMM3582M8 operates from -25°C to 70°C, while the IME08-02BPSZT0S operates from -25°C to 75°C. The substitute provides a 5°C higher upper temperature limit. For applications operating below 70°C, both parts are functionally equivalent in this parameter.

Q: Are there any differences in response frequency specifications?

A: The IMM3582M8 does not specify a response frequency value. The IME08-02BPSZT0S specifies 4kHz response frequency. This specification does not affect substitution eligibility, as the original part's response characteristics are not defined in the available technical parameters.

Q: What packaging differences exist between these parts?

A: The IMM3582M8 is supplied in standard packaging format. The IME08-02BPSZT0S is supplied in bulk packaging. Both parts are identical in form factor and connector interface. Packaging format does not affect electrical or mechanical compatibility.

Q: Why is the IMM3582M8 classified as obsolete?

A: Product obsolescence typically results from manufacturer discontinuation decisions. The IME08-02BPSZT0S, as an active product from SICK, Inc., represents the current market equivalent for this sensor category and specification range.

Q: Are both parts RoHS compliant?

A: Yes. The IMM3582M8 carries RoHS Compliance certification. The IME08-02BPSZT0S carries ROHS3 Compliance certification, representing the current RoHS regulatory standard. Both parts meet environmental compliance requirements for EU and global markets.