IMM3582M12 Equivalent & Substitute Parts

Part Overview

The IMM3582M12 is an inductive proximity sensor manufactured by Crouzet, designed for non-contact detection applications with a 2mm sensing distance. This cylindrical M8-threaded sensor operates across a 10V to 30V supply range and provides PNP normally-open output through a 3-wire connector interface. The product is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations.

Substiute Parts

IMM3582M12

CrouzetIn Stock: 963IMM3582M12 Datasheet

Current PartRFQ

IME08-02BPSZT0S

SICK, Inc.In Stock: 3073IME08-02BPSZT0S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IMM3582M12 is based on strict alignment of the following critical parameters:

• Sensor Type: Inductive technology for ferrous metal detection
• Sensing Distance: 0.079" (2mm) detection range
• Output Configuration: PNP normally-open 3-wire output
• Supply Voltage: 10V to 30V operating range
• Physical Form Factor: M8 cylindrical threaded housing
• Environmental Rating: IP67 ingress protection
• Body Material: Nickel-plated brass construction
• Termination: Connector-based interface

The IME08-02BPSZT0S from SICK, Inc. meets all these substitution criteria and is classified as an active product with current manufacturing status.

Parameter Comparison

Engineering Selection Recommendations

The IME08-02BPSZT0S is a direct functional equivalent for the obsolete IMM3582M12. Both sensors share identical electrical specifications, mechanical form factors, and environmental ratings. The IME08-02BPSZT0S offers the advantage of active product status with current manufacturing support and ROHS3 compliance certification. The extended operating temperature range of the SICK sensor (-25°C to 75°C versus -25°C to 70°C) provides additional thermal margin for demanding applications. Both components carry EAR99 ECCN classification and identical HTSUS codes, confirming regulatory equivalence.

Frequently Asked Questions (FAQ)

Q: Can the IME08-02BPSZT0S directly replace the IMM3582M12 in existing installations?

A: Yes. Both sensors share identical sensing distance, output type, supply voltage range, M8 threaded form factor, and IP67 rating. Connector pinout compatibility must be verified against your specific wiring harness documentation.

Q: What is the significance of the 4kHz response frequency specification on the IME08-02BPSZT0S?

A: The 4kHz response frequency indicates the maximum switching speed capability of the SICK sensor. This parameter was not specified for the Crouzet part. For applications requiring high-speed detection cycles, the SICK sensor provides documented performance data.

Q: Are there any compliance differences between these two sensors?

A: Both sensors are RoHS compliant. The IME08-02BPSZT0S carries ROHS3 certification, representing the current regulatory standard. Both share identical ECCN and HTSUS classifications for export and tariff purposes.

Q: Why is the IMM3582M12 listed as obsolete?

A: Obsolete status indicates the manufacturer has discontinued production. The IME08-02BPSZT0S, classified as active, represents the current market alternative with ongoing manufacturing support.

Q: Does the 5°C difference in maximum operating temperature affect substitution suitability?

A: The IME08-02BPSZT0S extends the upper operating limit to 75°C, providing additional thermal headroom. For applications operating below 70°C, both sensors perform identically within this range.