IMM3582C Equivalent & Substitute Parts

Part Overview

The IMM3582C is an inductive proximity sensor manufactured by Crouzet, designed for non-contact object detection in industrial applications. This cylindrical M8-threaded sensor operates across a 10V to 30V supply range with a 2mm sensing distance and PNP-NO output configuration. The product is currently obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in legacy installations.

Substiute Parts

IMM3582C

CrouzetIn Stock: 1140IMM3582C Datasheet

Current PartRFQ

IME08-02BPSZW2S

SICK, Inc.In Stock: 764IME08-02BPSZW2S Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IMM3582C is determined by strict equivalence across the following critical parameters:

• Sensor Type: Inductive technology for ferrous metal detection
• Sensing Distance: 0.079" (2mm) detection range
• Output Configuration: PNP-NO logic with 3-wire connection
• Supply Voltage: 10V to 30V DC operating range
• Physical Form Factor: M8 cylindrical threaded housing
• Environmental Rating: IP67 ingress protection
• Termination: Cable lead connections
• Body Material: Nickel-plated brass construction

The IME08-02BPSZW2S from SICK, Inc. meets all substitution criteria, providing functional and mechanical compatibility with the obsolete IMM3582C.

Parameter Comparison

Engineering Selection Recommendations

The IME08-02BPSZW2S is a direct functional substitute for the obsolete IMM3582C. Both sensors share identical electrical specifications, mechanical form factors, and environmental ratings. The IME08-02BPSZW2S offers the advantage of active product status with current manufacturing support and ROHS3 compliance, exceeding the RoHS requirements of the original component. The extended operating temperature range (-25°C to 75°C versus -25°C to 70°C) provides additional thermal margin. The specified 4kHz response frequency of the IME08-02BPSZW2S ensures compatibility with applications designed for the IMM3582C.

Frequently Asked Questions (FAQ)

Q: Can the IME08-02BPSZW2S directly replace the IMM3582C without circuit modifications?

A: Yes. Both sensors share identical output type (PNP-NO, 3-Wire), supply voltage range (10V ~ 30V), and sensing distance (2mm). The M8 threaded cylindrical housing ensures mechanical compatibility. No circuit redesign is required.

Q: What is the significance of the 4kHz response frequency specification on the IME08-02BPSZW2S?

A: The 4kHz response frequency indicates the maximum switching speed of the sensor. This specification was not provided for the IMM3582C but is standard for SICK inductive sensors in this class. The 4kHz rating ensures the IME08-02BPSZW2S can handle typical industrial detection cycles without performance degradation.

Q: Are there any compliance differences between the two sensors?

A: The IME08-02BPSZW2S carries ROHS3 compliance, which supersedes the RoHS compliance of the IMM3582C. Both sensors meet ECCN EAR99 and HTSUS 8543.70.9860 classifications. The IME08-02BPSZW2S includes REACH Unaffected status, confirming regulatory alignment with current environmental standards.

Q: Does the 5°C difference in maximum operating temperature affect substitution suitability?

A: No. The IME08-02BPSZW2S operates to 75°C versus the IMM3582C at 70°C. This extended range provides additional thermal margin and does not compromise compatibility. Applications operating within the original 70°C specification remain fully supported.

Q: What packaging options are available for the IME08-02BPSZW2S?

A: The IME08-02BPSZW2S is supplied in bulk packaging. For applications requiring specific packaging formats, consult component distribution channels for available options.