IMC3382C Equivalent & Substitute Parts

Part Overview

The IMC3382C is an inductive proximity sensor manufactured by Crouzet, designed for non-contact object detection in industrial applications. This cylindrical, threaded M8 sensor operates with a 2mm sensing distance and provides PNP-NC output through 3-wire cable leads. The product is currently obsolete, making identification of compatible substitute components essential for system maintenance, repair, and new design implementations where equivalent functionality is required.

Substiute Parts

IMC3382C

CrouzetIn Stock: 828IMC3382C Datasheet

Current PartRFQ

E2B-S08KS02-WP-B2 2M

Omron Automation and SafetyIn Stock: 956E2B-S08KS02-WP-B2 2M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2B-S08KS02-WP-B2 2M from Omron Automation and Safety qualifies as a direct substitute for the IMC3382C based on alignment across all critical electrical and mechanical parameters. Substitution compatibility is determined by the following matched specifications:

• Identical sensor type (Inductive)
• Identical sensing distance (0.079" / 2mm)
• Identical output configuration (PNP-NC, 3-Wire)
• Identical shielding classification (Shielded)
• Identical supply voltage range (10V ~ 30V)
• Identical termination method (Cable Leads)
• Identical operating temperature range (-25°C ~ 70°C)
• Identical ingress protection rating (IP67)
• Identical package form factor (Cylinder, Threaded - M8)
• Compatible RoHS compliance status

Parameter Comparison

Engineering Selection Recommendations

The E2B-S08KS02-WP-B2 2M is the qualified substitute for the obsolete IMC3382C. Selection is supported by:

• Active product status ensuring ongoing availability and supply chain continuity
• Full electrical parameter equivalence across voltage, output type, and sensing distance
• Mechanical compatibility with existing M8 threaded mounting infrastructure
• Enhanced RoHS3 compliance status, exceeding the original RoHS Compliant specification
• Identical ingress protection and operating temperature specifications
• Stainless steel body construction providing improved corrosion resistance compared to the nickel-plated brass original

Frequently Asked Questions (FAQ)

Q: Can the E2B-S08KS02-WP-B2 2M directly replace the IMC3382C in existing installations?

A: Yes. Both sensors share identical electrical specifications (10V ~ 30V supply, PNP-NC 3-wire output, 2mm sensing distance) and mechanical form factors (M8 threaded cylinder). Direct substitution is supported without circuit modification.

Q: What is the difference in body material between these sensors?

A: The IMC3382C uses nickel-plated brass, while the E2B-S08KS02-WP-B2 2M uses stainless steel. Both materials meet the IP67 ingress protection requirement. Stainless steel provides enhanced corrosion resistance in harsh or chemically aggressive environments.

Q: Are there any compliance differences?

A: The substitute part carries ROHS3 Compliant status, which represents a more current compliance standard than the original RoHS Compliant designation. Both parts share identical ECCN (EAR99) and HTSUS (8543.70.9860) classifications.

Q: Does the response frequency difference affect compatibility?

A: The E2B-S08KS02-WP-B2 2M specifies 1.5kHz response frequency, while the IMC3382C does not provide this specification. The substitute's response frequency is suitable for standard industrial proximity sensing applications within the specified operating parameters.

Q: What is the packaging difference?

A: The IMC3382C is listed as packaged in bulk with no specific packaging designation. The E2B-S08KS02-WP-B2 2M is packaged in bulk. Both are supplied with cable leads for direct integration.