IMC22124C Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The IMC22124C is an inductive proximity sensor manufactured by Crouzet, designed for non-contact detection of metallic objects at a 4mm sensing distance. This sensor features a cylindrical M12 threaded housing with shielded construction, NPN-NO output configuration, and operates across a 10V to 30V supply voltage range. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in applications where this sensor is currently deployed.

Substiute Parts

IMC22124C

CrouzetIn Stock: 1220IMC22124C Datasheet

Current PartRFQ

E2B-M12KS04-WP-C1 2M

Omron Automation and SafetyIn Stock: 1051E2B-M12KS04-WP-C1 2M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IMC22124C is determined by strict equivalence across the following critical parameters:

• Sensor Type: Inductive detection technology
• Sensing Distance: 0.157" (4mm) detection range
• Output Configuration: NPN-NO, 3-Wire signal output
• Shielding: Shielded construction for electromagnetic interference rejection
• Supply Voltage Range: 10V ~ 30V DC compatibility
• Operating Temperature Range: -25°C ~ 70°C
• Ingress Protection Rating: IP67 sealed enclosure
• Mechanical Package: Cylinder, Threaded - M12 form factor
• Termination: Cable leads connection method

The E2B-M12KS04-WP-C1 2M from Omron Automation and Safety meets all specified parameters and is classified as an active product, providing a direct functional replacement for the obsolete IMC22124C.

Parameter Comparison

Engineering Selection Recommendations

The E2B-M12KS04-WP-C1 2M is the direct equivalent for IMC22124C replacement applications. Selection is based on the following engineering criteria:

Product Status: The IMC22124C is obsolete, while the E2B-M12KS04-WP-C1 2M maintains active product status with ongoing manufacturer support and availability.

Regulatory Compliance: Both sensors meet RoHS requirements. The substitute part carries ROHS3 Compliant certification, representing current regulatory standards. The IMC22124C is RoHS Compliant, and the substitute meets enhanced compliance levels.

Functional Equivalence: All critical electrical and mechanical parameters are identical, including sensing distance, output configuration, supply voltage range, operating temperature limits, and ingress protection rating. The M12 threaded cylindrical package ensures direct mechanical compatibility in existing installations.

Availability: The E2B-M12KS04-WP-C1 2M is available in active inventory, addressing the sourcing challenges associated with the obsolete IMC22124C.

Frequently Asked Questions (FAQ)

Q: Can the E2B-M12KS04-WP-C1 2M be used as a direct replacement for IMC22124C in existing installations?

A: Yes. Both sensors share identical electrical specifications (10V ~ 30V supply, NPN-NO 3-Wire output, 4mm sensing distance), mechanical packaging (M12 threaded cylinder), and environmental ratings (IP67, -25°C ~ 70°C). Direct substitution is supported without circuit modification.

Q: What is the significance of the "2M" designation in the E2B-M12KS04-WP-C1 2M part number?

A: The "2M" indicates a 2-meter cable lead length. This matches the cable termination style of the IMC22124C and is relevant for installation planning and connector compatibility.

Q: Are there differences in response frequency between these sensors?

A: The IMC22124C does not specify a response frequency parameter. The E2B-M12KS04-WP-C1 2M specifies 1kHz response frequency. This parameter does not affect substitution compatibility for standard industrial proximity sensing applications.

Q: What compliance certifications should be verified for the substitute part?

A: The E2B-M12KS04-WP-C1 2M carries ROHS3 Compliant and REACH Affected certifications. Both sensors share EAR99 ECCN classification and identical HTSUS codes (8543.70.9860), confirming regulatory alignment.

Q: Is the M12 threaded package identical between both sensors?

A: Yes. Both sensors use identical Cylinder, Threaded - M12 mechanical packaging with nickel-plated brass construction, ensuring direct mechanical compatibility in existing mounting configurations.