IMC1210EB5R6J Equivalent & Substitute Parts

Part Overview

The IMC1210EB5R6J is a 5.6 µH unshielded drum core wirewound inductor manufactured by Vishay Dale, designed for surface mount applications in the 1210 (3225 Metric) package. This component operates across an industrial temperature range of -55°C to 125°C with a maximum DC resistance of 1.6Ohm and supports a current rating of 217 mA. The part is currently active in production and ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the allowed parameter tolerances for this inductor category.

Substiute Parts

IMC1210EB5R6J

Vishay DaleIn Stock: 950IMC1210EB5R6J Datasheet

Current PartRFQ

NLV32T-5R6J-EF

TDK CorporationIn Stock: 2367NLV32T-5R6J-EF Datasheet

MFR RecommendedRFQ

NLV32T-5R6J-PF

TDK CorporationIn Stock: 10287NLV32T-5R6J-PF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IMC1210EB5R6J are qualified based on the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Inductance value: 5.6 µH (±5% tolerance maintained)
• DC Resistance: 1.6Ohm maximum
• Q factor: 30 @ 7.96MHz
• Self-resonant frequency: 45MHz
• Inductance test frequency: 7.96 MHz

Mechanical Compatibility Criteria:

• Package / Case: 1210 (3225 Metric)
• Mounting type: Surface Mount
• Shielding configuration: Unshielded
• Physical dimensions: 0.126" L x 0.098" W (3.20mm x 2.49mm nominal)
• Height seated (max): Within 0.095" (2.41mm)

Functional Compatibility:

• Type: Drum Core, Wirewound
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute parts NLV32T-5R6J-EF and NLV32T-5R6J-PF meet these criteria with the following operational difference: current rating of 200 mA versus the original 217 mA, and operating temperature range of -40°C to 105°C versus -55°C to 125°C. These differences define the substitution boundaries for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

NLV32T-5R6J-EF (TDK Corporation): This substitute is recommended for applications where the operating temperature range of -40°C to 105°C is acceptable and the current requirement does not exceed 200 mA. The part is active in production status and ROHS3 compliant. The ferrite core material differs from the iron powder core of the original part, which may affect frequency response characteristics in specific circuit topologies. This part is suitable for new designs.

NLV32T-5R6J-PF (TDK Corporation): This substitute shares identical electrical specifications with NLV32T-5R6J-EF but carries a product status designation of "Not For New Designs." This part is available in high inventory (10,200 pcs) and may be used for legacy system maintenance or replacement applications only. The ferrite core material and operating temperature constraints apply as noted above.

Selection Criteria:

• If the application operates within -40°C to 105°C and current does not exceed 200 mA, either TDK substitute is electrically compatible.
• If the application requires the full -55°C to 125°C temperature range or sustained currents above 200 mA, the original IMC1210EB5R6J must be retained.
• For new designs, NLV32T-5R6J-EF is the appropriate substitute choice due to active production status.
• Core material differences (iron powder versus ferrite) may require circuit validation in high-frequency or noise-sensitive applications.

Frequently Asked Questions (FAQ)

Q: Can NLV32T-5R6J-EF replace IMC1210EB5R6J in all applications?

A: Substitution is valid when the application operates within -40°C to 105°C and the circuit current does not exceed 200 mA. If your design requires the extended temperature range (-55°C to 125°C) or higher current capability (217 mA), the original part must be used. The core material difference (ferrite versus iron powder) may affect circuit performance in frequency-dependent applications and should be evaluated.

Q: What is the difference between NLV32T-5R6J-EF and NLV32T-5R6J-PF?

A: Both parts have identical electrical specifications and package dimensions. The primary difference is product status: NLV32T-5R6J-EF is active in production and suitable for new designs, while NLV32T-5R6J-PF is marked "Not For New Designs" and should be used only for legacy system support or replacement applications.

Q: Are the physical dimensions identical between the main part and substitutes?

A: The package designation is identical (1210 / 3225 Metric), and length and width are the same (0.126" x 0.098" / 3.20mm x 2.49mm). Maximum seated height is 0.095" (2.41mm) for IMC1210EB5R6J and 0.094" (2.40mm) for the TDK substitutes. These dimensions are compatible with standard 1210 footprints.

Q: Why does the current rating differ between the main part and substitutes?

A: The IMC1210EB5R6J supports 217 mA while the TDK substitutes support 200 mA. This difference reflects the thermal and saturation characteristics of the respective core materials (iron powder versus ferrite). Applications requiring the full 217 mA rating must use the original part.

Q: Are all parts RoHS3 compliant?

A: Yes. IMC1210EB5R6J, NLV32T-5R6J-EF, and NLV32T-5R6J-PF are all ROHS3 compliant. Moisture Sensitivity Level is 1 (Unlimited) for all three parts.

Q: What packaging options are available?

A: IMC1210EB5R6J is supplied in Bulk packaging. NLV32T-5R6J-EF and NLV32T-5R6J-PF are supplied in Cut Tape (CT) and Digi-Reel® packaging formats.