IMB26654M8 Equivalent & Substitute Parts

Part Overview

The IMB26654M8 is an inductive proximity sensor manufactured by Crouzet with a 4mm (0.157") sensing distance and connector termination style. This product is classified as obsolete, making identification of equivalent and substitute parts essential for system maintenance, repair, and component sourcing in applications requiring inductive proximity sensing.

Substiute Parts

IMB26654M8

CrouzetIn Stock: 930IMB26654M8 Datasheet

Current PartRFQ

E2B-S08KN04-MC-C2

Omron Automation and SafetyIn Stock: 1044E2B-S08KN04-MC-C2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IMB26654M8 is based on the following critical parameters that must align for functional equivalence:

• Sensor Type: Inductive (electromagnetic proximity detection)
• Sensing Distance: 0.157" (4mm) nominal detection range
• Termination Style: Connector-based interface
• Regulatory Compliance: RoHS compliance status

The substitute part E2B-S08KN04-MC-C2 from Omron Automation and Safety meets these core substitution criteria. Both sensors operate on inductive proximity principles with identical 4mm sensing distances and connector termination, enabling direct functional replacement in applications where the IMB26654M8 is no longer available.

Parameter Comparison

Engineering Selection Recommendations

The E2B-S08KN04-MC-C2 serves as a functional substitute for the obsolete IMB26654M8 based on matching core sensor specifications: inductive proximity detection, 4mm sensing distance, and connector termination. Both components maintain identical RoHS compliance status and ECCN/HTSUS classifications, supporting regulatory and export requirements.

The substitute part carries active product status, ensuring ongoing availability and supply chain continuity. The E2B-S08KN04-MC-C2 is currently in stock with 1,025 units available, compared to the IMB26654M8's obsolete status with limited remaining inventory of 856 units.

Frequently Asked Questions (FAQ)

Q: Can the E2B-S08KN04-MC-C2 directly replace the IMB26654M8?

A: Yes, for applications requiring inductive proximity sensing at 4mm detection distance with connector termination. Both sensors share identical sensing distance specifications and connector-based interface architecture.

Q: What are the key differences between these sensors?

A: The E2B-S08KN04-MC-C2 provides additional specified parameters including NPN-NC output configuration, 1kHz response frequency, stainless steel body construction, 10V–30V supply voltage range, -25°C to 70°C operating temperature, IP67 ingress protection, and LED indicator. The IMB26654M8 specifications for these parameters are not provided in available documentation.

Q: Are there compliance or regulatory concerns with substitution?

A: Both components maintain RoHS compliance and share identical ECCN (EAR99) and HTSUS (8543.70.9860) classifications, supporting equivalent regulatory and export compliance requirements.

Q: What is the package configuration difference?

A: The E2B-S08KN04-MC-C2 is specified as a cylinder with M8 threaded package. The IMB26654M8 package configuration is not provided in available documentation.

Q: Should connector compatibility be verified before substitution?

A: Connector type and pin configuration must be verified against system integration requirements, as detailed connector specifications for the IMB26654M8 are not provided in available documentation.