IMA35654C Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The IMA35654C is a cylindrical inductive proximity sensor manufactured by Crouzet, designed for non-contact detection applications with a 4mm sensing distance. This sensor features PNP-NO output configuration, stainless steel construction, and operates across a wide voltage range of 10V to 30V. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in ongoing applications.

Substiute Parts

IMA35654C

CrouzetIn Stock: 844IMA35654C Datasheet

Current PartRFQ

E2E-C06N04-WC-B1 2M

Omron Automation and SafetyIn Stock: 791E2E-C06N04-WC-B1 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IMA35654C is determined by strict equivalence across the following critical parameters:

• Sensor Type: Inductive (detection principle must remain unchanged)
• Sensing Distance: 0.157" (4mm) (detection range must be identical)
• Output Configuration: PNP-NO, 3-Wire (electrical interface must match)
• Voltage Supply Range: 10V ~ 30V (operating voltage compatibility required)
• Operating Temperature Range: -25°C ~ 70°C (thermal operating envelope must be maintained)
• Ingress Protection: IP67 (environmental sealing specification must be met)
• Body Material: Stainless Steel (material compatibility for application environment)
• Termination Style: Cable Leads (connection method must be compatible)
• Package Type: Cylinder (form factor must be cylindrical)

The E2E-C06N04-WC-B1 2M from Omron Automation and Safety meets all critical substitution criteria across these parameters, establishing it as a functionally equivalent alternative.

Parameter Comparison

Engineering Selection Recommendations

The E2E-C06N04-WC-B1 2M represents a direct functional equivalent for the obsolete IMA35654C across all critical electrical and mechanical parameters. The substitute maintains identical sensing distance, output configuration, voltage supply range, temperature operating envelope, and physical form factor.

Product Status Consideration: The IMA35654C is classified as obsolete, while the E2E-C06N04-WC-B1 2M maintains active product status from Omron Automation and Safety, ensuring ongoing availability and manufacturer support.

Compliance Difference: The IMA35654C is RoHS compliant, whereas the E2E-C06N04-WC-B1 2M is RoHS non-compliant. Applications subject to RoHS regulatory requirements must account for this compliance difference during component selection.

Response Frequency: The Omron substitute specifies a response frequency of 3kHz, providing quantified switching speed performance not documented for the original Crouzet part.

Frequently Asked Questions (FAQ)

Q: What makes the E2E-C06N04-WC-B1 2M a suitable substitute for the IMA35654C?

A: The E2E-C06N04-WC-B1 2M matches all critical substitution parameters: identical inductive sensor type, 4mm sensing distance, PNP-NO 3-wire output configuration, 10V–30V supply voltage range, -25°C to 70°C operating temperature, IP67 ingress protection, stainless steel body construction, cable lead termination, and cylindrical package form factor.

Q: Are there any differences between these two sensors that would affect system integration?

A: The primary differences are product status and regulatory compliance. The IMA35654C is obsolete, while the E2E-C06N04-WC-B1 2M is an active product. Additionally, the Crouzet part is RoHS compliant while the Omron substitute is RoHS non-compliant. Applications requiring RoHS compliance must evaluate this difference. The Omron part specifies a 3kHz response frequency, whereas the Crouzet part does not provide this specification.

Q: Can the E2E-C06N04-WC-B1 2M be directly installed in place of the IMA35654C?

A: Yes, the E2E-C06N04-WC-B1 2M can be directly substituted based on electrical and mechanical compatibility. Both sensors feature identical cable lead termination, cylindrical form factor, and PNP-NO output configuration, allowing direct installation without circuit modification.

Q: What is the significance of the "2M" designation in the part number?

A: The "2M" designation indicates a 2-meter cable lead length for the sensor termination.

Q: Should RoHS compliance be a factor in selecting between these parts?

A: RoHS compliance requirements depend on the application's regulatory environment and end-use market. The IMA35654C is RoHS compliant, while the E2E-C06N04-WC-B1 2M is not. Applications subject to RoHS directives must select the compliant component accordingly.