IMA35652C Equivalent & Substitute Parts

Part Overview

The IMA35652C is an inductive proximity sensor manufactured by Crouzet, designed for non-contact object detection in industrial applications. This cylindrical sensor operates with a 2mm sensing distance and provides PNP-NO output through a 3-wire cable connection. The product is currently obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in existing installations.

Substiute Parts

IMA35652C

CrouzetIn Stock: 1046IMA35652C Datasheet

Current PartRFQ

E2E-C03N02-WC-B1 2M

Omron Automation and SafetyIn Stock: 693E2E-C03N02-WC-B1 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-C03N02-WC-B1 2M qualifies as a direct functional equivalent based on the following critical parameters:

• Sensor Type: Both are inductive proximity sensors
• Sensing Distance: Identical at 0.079" (2mm)
• Output Configuration: Both provide PNP-NO output with 3-wire termination
• Voltage Supply Range: Both operate within 10V ~ 30V
• Shielding: Both are unshielded designs
• Body Material: Both feature stainless steel construction
• Termination: Both use cable leads
• Operating Temperature Range: Both rated -25°C ~ 70°C
• Ingress Protection: Both meet IP67 specification
• Package Form Factor: Both are cylindrical sensors
• Status Indication: Both include LED indicators

The E2E-C03N02-WC-B1 2M is an active product from Omron Automation and Safety, providing continuity for applications currently using the obsolete IMA35652C.

Parameter Comparison

Engineering Selection Recommendations

The E2E-C03N02-WC-B1 2M is the appropriate substitute for the obsolete IMA35652C. Both sensors share identical electrical and mechanical specifications across all critical parameters. The Omron component maintains active product status with current manufacturing support and supply availability. The E2E-C03N02-WC-B1 2M meets ROHS3 compliance, exceeding the RoHS Compliant status of the original part. Both components carry identical ECCN (EAR99) and HTSUS (8543.70.9860) classifications. The substitute part is available in bulk packaging with confirmed inventory stock.

Frequently Asked Questions (FAQ)

Q: Can the E2E-C03N02-WC-B1 2M directly replace the IMA35652C in existing installations?

A: Yes. Both sensors share identical sensing distance (2mm), output configuration (PNP-NO, 3-wire), voltage supply range (10V ~ 30V), operating temperature range (-25°C ~ 70°C), and physical form factor (cylindrical stainless steel). The electrical and mechanical interfaces are equivalent.

Q: What is the primary difference between these two sensors?

A: The IMA35652C is obsolete with no active manufacturing, while the E2E-C03N02-WC-B1 2M is an active product with current supply availability. The Omron component also carries ROHS3 compliance versus RoHS Compliant status on the Crouzet part.

Q: Are there any compatibility concerns with cable termination?

A: Both sensors use cable leads as the termination style. Connector compatibility depends on the specific cable assembly and control system interface in your application. Verify cable gauge and connector type match your system requirements.

Q: Does the substitute part have different response frequency characteristics?

A: The E2E-C03N02-WC-B1 2M specifies a response frequency of 4.6kHz. The IMA35652C response frequency is not provided in the available specifications. Consult detailed datasheets if response frequency is a critical parameter for your application timing requirements.

Q: What packaging options are available?

A: The IMA35652C was supplied in standard packaging. The E2E-C03N02-WC-B1 2M is available in bulk packaging with 675 units in current stock inventory.