IL-Z-2PL1-SMTYE-R1500 Equivalent & Substitute Parts

Part Overview

The IL-Z-2PL1-SMTYE-R1500 is a rectangular connector header manufactured by JAE Electronics, designed for surface mount, right-angle applications with 2 positions at 1.25mm pitch. This component is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support, legacy system maintenance, and production continuity.

Substiute Parts

IL-Z-2PL1-SMTYE-R1500

JAE ElectronicsIn Stock: 1126IL-Z-2PL1-SMTYE-R1500 Datasheet

Current PartRFQ

10114830-11102LF

Amphenol ICC (FCI)In Stock: 880710114830-11102LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 10114830-11102LF (Amphenol ICC/FCI) qualifies as an equivalent based on the following critical parameters:

• Connector Type & Contact Configuration: Both are header connectors with male pin contacts
• Pitch & Position Count: Identical 0.049" (1.25mm) pitch with 2 positions in single row
• Mounting & Orientation: Both surface mount, right-angle configuration
• Shrouding & Fastening: Both feature shrouded 4-wall design with solder termination
• Electrical Ratings: Both rated 1A per contact with UL94 V-0 flammability compliance
• Moisture Sensitivity: Both MSL 1 (Unlimited)

Substitution is valid where the operating temperature range and voltage rating of the substitute meet or exceed the application requirements of the original part.

Parameter Comparison

Engineering Selection Recommendations

The 10114830-11102LF serves as a direct functional substitute for the obsolete IL-Z-2PL1-SMTYE-R1500 in applications where the voltage requirement does not exceed 125V. The substitute part offers extended operating temperature range (-40°C ~ 105°C versus -40°C ~ 70°C), providing additional thermal margin. The substitute is currently in active production status with RoHS compliance certification, supporting long-term supply chain stability and regulatory alignment.

For applications requiring the full 200V voltage rating of the original part, alternative sources must be evaluated against the specified electrical and mechanical parameters.

Frequently Asked Questions (FAQ)

Q: Can the 10114830-11102LF replace the IL-Z-2PL1-SMTYE-R1500 in all applications?

A: Substitution is valid where the application voltage requirement does not exceed 125V. The original part is rated 200V; the substitute is rated 125V. Verify your circuit voltage specification before substitution.

Q: What are the key compatibility factors for this substitution?

A: Pitch (1.25mm), position count (2), mounting type (surface mount right-angle), shrouding (4-wall), and termination method (solder) are identical. Both parts meet UL94 V-0 flammability and MSL 1 moisture sensitivity requirements.

Q: Why is the original part listed as obsolete?

A: The IL-Z-2PL1-SMTYE-R1500 is classified as obsolete by JAE Electronics. The 10114830-11102LF is an active production part from Amphenol ICC/FCI with equivalent mechanical and electrical specifications for most applications.

Q: Are there packaging differences between these parts?

A: The original part packaging is not specified. The substitute (10114830-11102LF) is supplied in Tape & Reel (TR) format, standard for surface mount production environments.

Q: Does the substitute part support the same operating temperature range?

A: The substitute supports a wider operating temperature range (-40°C ~ 105°C) compared to the original (-40°C ~ 70°C), providing additional thermal capability for demanding environments.