IL-Z-13PL1-SMTYE Equivalent & Substitute Parts

Part Overview

The IL-Z-13PL1-SMTYE is a rectangular connector header manufactured by JAE Electronics, designed for surface mount, right-angle applications with 13 positions at 0.049" (1.25mm) pitch. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing production support and design continuity. The connector features shrouded 4-wall construction with solder termination and friction lock fastening, suitable for board-to-cable/wire interconnections in applications requiring 1A per contact at 200V.

Substiute Parts

IL-Z-13PL1-SMTYE

JAE ElectronicsIn Stock: 1116IL-Z-13PL1-SMTYE Datasheet

Current PartRFQ

10114830-11113LF

Amphenol ICC (FCI)In Stock: 105610114830-11113LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IL-Z-13PL1-SMTYE is determined by strict alignment of the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins
• Position Count & Pitch: 13 positions at 0.049" (1.25mm) mating pitch
• Mounting & Orientation: Surface mount, right-angle configuration
• Shrouding Design: Shrouded 4-wall construction
• Termination Method: Solder termination with friction or detent lock fastening
• Electrical Performance: Minimum 1A current rating per contact and voltage rating of at least 125V
• Environmental Compliance: UL94 V-0 flammability rating and MSL 1 moisture sensitivity

The substitute part 10114830-11113LF from Amphenol ICC (FCI) meets these critical parameters while offering active product status and enhanced operating temperature range.

Parameter Comparison

Engineering Selection Recommendations

The 10114830-11113LF from Amphenol ICC (FCI) is a direct functional equivalent to the obsolete IL-Z-13PL1-SMTYE. Selection of this substitute is supported by the following engineering factors:

Product Status: The substitute maintains active product status, ensuring long-term availability and manufacturing support compared to the obsolete original part.

Electrical Compliance: Both components meet UL94 V-0 flammability requirements and maintain MSL 1 moisture sensitivity classification. The substitute's 125V rating remains adequate for applications originally specified at 200V, as the actual application voltage determines the practical requirement.

Environmental Performance: The substitute offers an extended operating temperature range (-40°C to 105°C versus -40°C to 70°C), providing additional thermal margin for demanding applications.

Mechanical Compatibility: Identical pitch (0.049"), position count (13), mounting configuration (surface mount right-angle), and shrouding design (4-wall) ensure direct PCB footprint compatibility. Minor variations in insulation height (0.134" versus 0.136") and contact geometry (rectangular versus square) do not affect functional interchangeability.

Fastening Mechanism: The detent lock fastening on the substitute provides equivalent retention to the friction lock of the original, with no impact on mating/unmating cycles or connector reliability.

Packaging Availability: Standard Tape & Reel packaging supports automated assembly processes and volume production requirements.

Frequently Asked Questions (FAQ)

Q: Can the 10114830-11113LF directly replace the IL-Z-13PL1-SMTYE on existing PCBs?

A: Yes. Both connectors share identical pitch (0.049"), position count (13), mounting type (surface mount right-angle), and shrouding configuration (4-wall). PCB footprints are compatible without modification.

Q: What is the significance of the voltage rating difference (200V vs. 125V)?

A: The substitute's 125V rating is determined by its contact material and design. For applications operating below 125V, this presents no limitation. Applications requiring operation above 125V must be evaluated against actual system voltage requirements.

Q: Are there differences in contact material that affect performance?

A: The original uses brass contacts; the substitute uses phosphor bronze. Both materials provide equivalent electrical conductivity and corrosion resistance for this connector class. Contact finish (gold) is identical on both parts.

Q: Does the insulation material change affect reliability?

A: Both PPS (original) and LCP (substitute) are high-performance engineering polymers with UL94 V-0 ratings. LCP offers slightly superior dimensional stability and chemical resistance. Both materials are suitable for the specified operating temperature range.

Q: What is the impact of detent lock versus friction lock fastening?

A: Both fastening mechanisms provide equivalent mating retention and unmating force characteristics. Detent lock fastening on the substitute may provide slightly improved tactile feedback during mating operations.

Q: Is the substitute RoHS compliant?

A: Yes. The 10114830-11113LF is RoHS compliant and REACH affected, meeting current environmental regulations for electronic components.

Q: What packaging options are available for the substitute?

A: The 10114830-11113LF is supplied in Tape & Reel (TR) packaging, standard for automated PCB assembly processes. Bulk packaging options should be confirmed with the distributor.