IL-Y-10S-S15C3 Equivalent & Substitute Parts

Part Overview

The IL-Y-10S-S15C3 is a 10-position rectangular connector receptacle housing manufactured by JAE Electronics. This component features a 1.50mm pitch, crimp contact termination, and friction lock fastening. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and procurement planning. Substitute parts must maintain identical electrical and mechanical specifications to ensure direct interchangeability in existing applications.

Substiute Parts

IL-Y-10S-S15C3

JAE ElectronicsIn Stock: 897IL-Y-10S-S15C3 Datasheet

Current PartRFQ

ZHR-10

JST Sales America Inc.In Stock: 27061ZHR-10 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IL-Y-10S-S15C3 is determined by strict alignment of the following critical parameters:

• Connector Type & Contact Configuration: Receptacle housing with female socket contacts
• Position Count & Pitch: 10 positions at 0.059" (1.50mm) pitch
• Row Configuration: Single row layout
• Termination Method: Crimp contact termination
• Insulation Material: Polyamide (PA66) / Nylon 6/6
• Mounting Style: Free hanging in-line configuration
• Moisture Sensitivity: MSL 1 rating

The ZHR-10 manufactured by JST Sales America Inc. meets all substitution criteria across these parameters, establishing it as a direct functional equivalent.

Parameter Comparison

Engineering Selection Recommendations

The ZHR-10 is the qualified substitute for the IL-Y-10S-S15C3 based on the following factors:

Electrical & Mechanical Compatibility: All critical parameters align identically, including connector type, contact configuration, position count, pitch, row layout, termination method, and insulation material. This establishes direct functional interchangeability.

Product Status & Availability: The IL-Y-10S-S15C3 is obsolete, while the ZHR-10 maintains active production status with significantly higher inventory availability (26,964 units in stock versus 866 units). This ensures long-term procurement viability.

Regulatory Compliance: The ZHR-10 provides documented ROHS3 compliance and REACH unaffected status, supporting modern regulatory requirements. Operating temperature specification (-25°C ~ 85°C) is provided for the ZHR-10, enabling thermal design verification.

Standardization: Both parts utilize identical insulation material (PA66/Nylon 6/6) and MSL 1 rating, eliminating material compatibility concerns in assembly and storage.

Frequently Asked Questions (FAQ)

Q: Can the ZHR-10 directly replace the IL-Y-10S-S15C3 in existing designs?

A: Yes. The ZHR-10 matches all critical electrical and mechanical parameters: 10-position receptacle housing, 1.50mm pitch, female socket contacts, crimp termination, single-row configuration, and identical insulation material. Direct substitution is supported without design modification.

Q: What are the key differences between these parts?

A: The primary differences are manufacturer (JAE versus JST), product status (obsolete versus active), and color (brown versus natural). The ZHR-10 provides documented operating temperature range and RoHS3 compliance, which the IL-Y-10S-S15C3 does not specify.

Q: Are there any compatibility concerns with contact pins or mating connectors?

A: Both housings accept crimp-terminated contacts and are designed for free-hanging in-line mounting. Compatibility depends on contact specifications and mating connector design, which are determined by the base product series (IL-Y versus ZH) and must be verified against your specific contact and plug housing selections.

Q: What is the significance of the MSL 1 rating for both parts?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture control requirements. Both parts can be stored and handled under standard conditions without desiccant packaging or baking procedures.

Q: Should the color difference (brown versus natural) affect substitution decisions?

A: Color is a cosmetic parameter and does not affect electrical or mechanical function. Selection between brown and natural depends on application aesthetics and internal assembly documentation requirements.