IL-S-8S-S2C2-S Equivalent & Substitute Parts

Part Overview

The IL-S-8S-S2C2-S is an 8-position rectangular connector receptacle housing manufactured by JAE Electronics with a 2.00mm pitch. This component is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system support and component procurement. The connector accommodates crimp-terminated female socket contacts and operates across a temperature range of -40°C to 85°C. Substitute parts must maintain functional compatibility through matching electrical and mechanical parameters while potentially offering improved availability and product status.

Substiute Parts

IL-S-8S-S2C2-S

JAE ElectronicsIn Stock: 905IL-S-8S-S2C2-S Datasheet

Current PartRFQ

0510900800

MolexIn Stock: 90240510900800 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IL-S-8S-S2C2-S is determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Receptacle housing with female socket contacts
• Position Count & Pitch: 8 positions at 0.079" (2.00mm) spacing
• Mounting & Termination: Free hanging in-line mounting with crimp termination
• Environmental Compliance: Moisture sensitivity level 1 and REACH unaffected status

The Molex 0510900800 satisfies all mandatory substitution criteria. While the substitute features polybutylene terephthalate (PBT) insulation material versus the original polyamide (PA66) composition, and extends the operating temperature range to 105°C, these represent functional enhancements rather than deviations from the core electrical and mechanical interface requirements.

Parameter Comparison

Engineering Selection Recommendations

The IL-S-8S-S2C2-S is obsolete, necessitating transition to an active equivalent for new procurement and long-term system support. The Molex 0510900800 provides direct functional substitution with identical electrical and mechanical interface parameters. The substitute part carries active product status and ROHS3 compliance certification, supporting regulatory requirements for current manufacturing environments. The extended operating temperature capability of the substitute (105°C versus 85°C) presents no compatibility constraint and may provide additional thermal margin in applications approaching the original specification limit. Both parts maintain identical moisture sensitivity classification and export control status.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0510900800 directly replace the JAE IL-S-8S-S2C2-S in existing assemblies?

A: Yes. Both parts share identical connector type, contact configuration, position count, pitch, mounting method, and termination approach. The mechanical and electrical interfaces are equivalent.

Q: What is the significance of the insulation material difference between PA66 and PBT?

A: Both materials are standard thermoplastic insulators for connector housings. PBT offers enhanced chemical resistance and dimensional stability. This material substitution does not affect connector interface compatibility or electrical performance.

Q: Does the extended operating temperature range of the substitute part affect compatibility?

A: No. The substitute's 105°C upper limit exceeds the original 85°C specification, providing additional thermal capability without introducing incompatibility. Applications operating within the original temperature range remain fully compatible.

Q: Are contacts included with either housing?

A: No. Both the IL-S-8S-S2C2-S and 0510900800 are housings only. Contacts must be procured separately and crimped into the housing.

Q: What packaging format is available for the substitute part?

A: The Molex 0510900800 is supplied in bulk packaging, differing from the original part's packaging specification. Verify packaging requirements for your procurement process.